Carrera BKR 11-95 Street Rod Rear Coil Over Shock Kit, 115 lbs. Rate

							                        

                                                        Carrera Coil-overs, with their patented Hyper-Charging process, are among the finest coilovers in the industry. All pieces are beautifully chrome plated. Shocks feature 1/2" bearing ends installed (will also accept 5/8" bearing ends # 255-1818B available separately - see below) with 5/8" urethane bushings included. Available for rear axle applications (see chart).  
Shock Eye Ring:  1-1/16" I.D. by 5/8" wide
Urethane Bushing Width Installed:  1-1/4"
Kit consists of:
(2) Chrome 1.63" steel body shocks
(2) Chrome coil-over springs
(2) Polished aluminum spring mounting hardware kits
Coil-Over Mounting Guide (GIF) 
Rear Coil-Over Shock Chart (GIF)
Coil-over Illustration (Link)
Carrera Shock Specs Chart (Link)
 
                                                    

						                        

							                        

                                                        
These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Has 5/8" I.D. mounting eyes and includes 1/2" bushing. Sold as a pair.
Billet aluminum shock body
5/8" centerless ground, hard chrome plated, solid piston rod 
Deflective Disc Valving
3-step sealing system
18-position adjuster knob changes the rebound valving
Allows suspension control in one easy-to-reach location
100% dyno tested and serialized
Revalveable and rebuildable by QA1 authorized service centers
2-1/2" I.D. chrome-silicon spring
Guaranteed to stay within 2% of rate and length FOR LIFE
Note: Shock lengths represent mounted length at ride height.

Coil-Over Chart (Link)
Coil-Over Mounting Guide (GIF)

                                                    

						                        

							                        

                                                        
Bilstein's street rod shocks are considered by many to be the best money can buy. By using a monotube design, the piston diameter can be larger and reacts better to changing road conditions. 

The shocks are also correctly valved for the rear of your car to give you the most comfortable ride in a non-adjustable shock. Has 5/8" I.D. mounting eyes.
Kit includes: One Bilstein rear coilover and a Carrera spring (several spring rates available)
                                                    

						                        

							                        

                                                        
Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.
Each kit includes:
(1) Chrome 1.63" steel body shock 
(1) Chrome 10" spring 
(1) Polished aluminum spring mounting kit
Mounted Length:  12-3/8"
Compressed Length:  9-3/4"
Extended Length:  14-5/8" 
Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing
Coil-Over Mounting Guide (GIF) 
Carrera Spring Rate Chart (GIF)
Coil-Over Illustration (Link) 
                                                    

						                        

							                        

                                                        
Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.
Each kit includes:
(1) Chrome 1.63" steel body shock 
(1) Chrome 10" spring 
(1) Polished aluminum spring mounting kit
Mounted Length:  12-3/8"
Compressed Length:  9-3/4"
Extended Length:  14-5/8" 
Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing
Coil-Over Mounting Guide (GIF) 
Carrera Spring Rate Chart (GIF)
Coil-Over Illustration (Link) 
                                                    

						                        

							                        

                                                        
Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.
Each kit includes:
(1) Chrome 1.63" steel body shock 
(1) Chrome 10" spring 
(1) Polished aluminum spring mounting kit
Mounted Length:  12-3/8"
Compressed Length:  9-3/4"
Extended Length:  14-5/8" 
Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing
Lightweight chrome-silicon springs, guaranteed within 2% of rate and height
Coil-Over Mounting Guide (GIF) 
Carrera Spring Rate Chart (GIF)
Coil-Over Illustration (Link) 
                                                    

						                        

							                        

                                                        
Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.
Each kit includes:
(1) Chrome 1.63" steel body shock 
(1) Chrome 10" spring 
(1) Polished aluminum spring mounting kit
Mounted Length:  12-3/8"
Compressed Length:  9-3/4"
Extended Length:  14-5/8" 
Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing
Coil-Over Mounting Guide (GIF) 
Carrera Spring Rate Chart (GIF)
Coil-Over Illustration (Link) 
                                                    

						                        

							                        

                                                        
Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.
Each kit includes:
(1) Chrome 1.63" steel body shock 
(1) Chrome 10" spring 
(1) Polished aluminum spring mounting kit
Mounted Length:  12-3/8"
Compressed Length:  9-3/4"
Extended Length:  14-5/8" 
Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing
Coil-Over Mounting Guide (GIF) 
Carrera Spring Rate Chart (GIF)
Coil-Over Illustration (Link) 
                                                    

						                        

							                        

                                                        
Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.
Each kit includes:
(1) Chrome 1.63" steel body shock 
(1) Chrome 10" spring 
(1) Polished aluminum spring mounting kit
Mounted Length:  12-3/8"
Compressed Length:  9-3/4"
Extended Length:  14-5/8" 
Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing
Coil-Over Mounting Guide (GIF) 
Carrera Spring Rate Chart (GIF)
Coil-Over Illustration (Link) 
                                                    

						                        

							                        

                                                        
Pro shocks new aluminum small body coilover shocks are 3-way adjustable. They are fitted a with 2-1/2" chrome spring and aluminum coilover kit and make one of the cleanest coil overs on the market for your street rod. Each shock features urethane mounting bushings with both 1/2" and 5/8" mounting coilover sleeves.
Suggested Installed Height:  13-1/4” to 13-1/2”
Adjustment Instructions (GIF)