C&R Radiators X8000220075 Chevy Aluminum Radiator, 19 x 22 Inch

							                        

                                                        
The 8000 Series is available for larger engine cooling needs. Perfect for late models running V-8 engine with 300 H.P. and above. This radiator has a 2 row core and is a Chevy engine configuration. Standard with 1- 1/2" inlet and 1-3/4" outlet and top and bottom mounts.

The width measurement (26") is measured from outside of tank to outside of tank, the entire radiator, not just the core.
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.    
 

 
 
                                                    

						                        

							                        

                                                        
The C&R Racing Double Pass Aluminum Cross Flow Radiator features a single, female, 20-port fitting with 1-1/2" neck for the inlet. The lower hose neck measures 1-3/4" and the inlet and outlet are on the same side.

The width measurement (22") is measured from outside of tank to outside of tank, the entire radiator, not just the core.
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        This set of radiator pads consists of two pieces of 1/4" thick rubber. One set provides enough rubber for all four brackets in our radiator mount bracket kit 91734700-STL.
                                                    
						                        

							                        

                                                        
2" outside diameter, 1⁄4" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-off cap.
Heavy wall construction
Billet screw in cap
Clear neoprene seal 
911-02215 Instructions (PDF)
                                                    

						                        

							                        

                                                        Leave it to Speedway to offer you a professional quality aluminum racing radiator at an affordable price. Check out these features: 
All aluminum, furnace brazed construction - NO EPOXY, NO GASKETS 
2 rows of 1" aluminum tubes (out cools 5 rows of copper) 
Maximum amount of fins per inch, allows greater heat transfer 
Billet filler neck - not stamped 
Available in 22", 24", 26", 28" or 31" (width measurements include tanks) 
19" tall
In this Ford / Mopar Application the upper hose is located on the passenger side & the lower hose is located on the driver side. 
Speedy Bill recommends using a 32 lb. or less radiator cap and to check it regularly.
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  
                                                    

						                        

							                        

                                                        
A must have when racing! High pressure cap for radiators raises boiling point of water.
Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles. 
                                                    

						                        

							                        

                                                        Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over 1.625" to 2.125" O.D. hose.
                                                    
						                        

							                        

                                                        
The 8000 Series is available for larger engine cooling needs. Perfect for late models running V-8 engine with 300 H.P. and above. This radiator has a 2 row core and is a Chevy engine configuration. Standard with 1- 1/2" inlet and 1-3/4" outlet and top and bottom mounts.

The width measurement (31") is measured from outside of tank to outside of tank, the entire radiator, not just the core.
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.    
 

 
 
                                                    

						                        

							                        

                                                        
The C&R Racing Double Pass Aluminum Cross Flow Radiator features a single, female, 20-port fitting with 1-1/2" neck for the inlet. The lower hose neck measures 1-3/4" and the inlet and outlet are on the same side.

The width measurement (26") is measured from outside of tank to outside of tank, the entire radiator, not just the core.
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
The C&R Racing Double Pass Aluminum Cross Flow Radiator features a single, female, 20-port fitting with 1-1/2" neck for the inlet. The lower hose neck measures 1-3/4" and the inlet and outlet are on the same side.

The width measurement (31") is measured from outside of tank to outside of tank, the entire radiator, not just the core.
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
One piece plastic shroud with full contact rubber seal that maximizes air flow (forces all air through the radiator). Highest CFM rating in the industry for this size. High torque, high RPM motor draws 19.5 amps and moves 3000 CFM.
Provides constant cooling, regardless of engine RPM                  
Generates cooler A/C output
                  
Extends water pump life
                  
Rigid bracket mounting system, no through core mounting
                  
Entire assembly is only 4-1/4" thick
Includes 160° adjustable thermostat control
Amp Draw:  19.5
Blades:  8
Controls:  160° adjustable thermostat, A/C relay, and manual switch connection
Fuse/Breaker:  40 amp fuse
Flex-a-lite Instructions (PDF)
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.  
                 
                                                    

						                        

							                        

                                                        
This universal radiator shroud is made from tough high-impact plastic to withstand today's rigorous racing. Mounting brackets will need to be fabricated for each application.
23-3/8" W x 20-7/8" L x 2-7/8" T
Accommodates up to a 19" diameter fan
Keeps motor cool during a long night of racing
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.
                                                    

						                        

							                        

                                                        
With its own air supply, this remote cooler can literally be mounted almost anywhere, making it a popular addition for performance compacts, hot rods, muscle cars, and trucks. An efficient 16-pass tube-and-fin cooler coupled with a Tornado fan and aluminum brackets makes this unit ideal for transmission, power steering and fuel cooling.
Mounts anywhere space permits
Electric fan supplies optimum air flow
16 pass core
650 CFM reversible Tornado electric fan
Built with AN 6 male fittings
Two 3/8" hose barb adapters included
16-3/4" wide, 11-1/2" tall, 5" thick
Inlet Spacing:  8-3/4"
Barb Size:  3/8"
Airflow:  Puller (reversible)
Remote Fluid Cooler Installation Instructions (PDF)