Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Brake Light Switch for Inverted Flare

SAME DAY SHIPPING! Order within the next 9 hours 42 minutes and receive same day shipping

Specs
Overall Length:
1.75
Sold in Quantity:
Each
Thread Pitch:
3/8"-24 IFM
Terminal Type:
Spade
Notes
Designed to be installed in a 3/8"-24 IFF fitting. Spades are 1/4" wide.
Brake Light Switch for Inverted Flare
Brake Light Switch for Inverted Flare

Click image to enlarge

Watch the video below to learn more about the differences in brake lines, flare types and fittings you may want to consider before plumbing away on your current chassis project.

Please NOTE the following about this product:

  • This product is discontinued.

Details

Reviews

Q & A

What's in the Box

Note:  This unit has been phased out and replaced with the new, replacement item # 910-31304 as suggested below.

 

This brake light switch has a 3/8"-24 IFM thread so you can screw it right into an inverted flare brake fitting.

  • Designed to be installed into a 3/8"-24 inverted flare female fitting
  • Switch has two 1/4" wide male spade terminals
NOTE:   If using residual valves in conjunction with this switch, we recommend installing the switch in-line before the residual valves.

You may also be interested in:

Pressure Brake Switch, 1/8 NPT
SKU-91031305
                        

Pressure brake switch has 1/8" male NPT threads. For inline installation of this switch, use one of the corresponding tee fittings. This is a standard normally open switch that closes when actuated, at 60-100 psi.

3/8 In-24 IFF Each End, 1/8 In NPT Female Center, Brass Adapter Tee
SKU-91031830
                        IFF TEE male and female adapters
                    
AFCO 40245 3/8 IFF to 1/8 NPT Female Adapter
SKU-10640245
                        Catalog Correction: This is a 1/8” female, not male, 3/8" IFF (inverted flare female) to 1/8" NPT brass adapter fitting.
                    
Brake Light Switch with 3/8 Inch IFM Adapter Fitting
SKU-91031304
                        

This brake light switch has a 3/8"-24 IFM thread so you can screw it right into an inverted flare brake fitting.

  • Designed to be installed into a 3/8"-24 inverted flare female fitting
  • Switch has two 1/4" wide male spade terminals
  • 3/8"-24 IFM thread adapter included
NOTE:   If using residual valves in conjunction with this switch, we recommend installing the switch in-line before the residual valves.