Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Braided Stainless Headlight Conduit

SAME DAY SHIPPING! Order within the next 10 hours 32 minutes and receive same day shipping

Specs
Material Type:
Stainless Steel
Overall Length:
14.5
Sold in Quantity:
Pair
Shank Length:
1.375
Notes
Requires 1/2" hole to be drilled for proper install. Cut to length. Wires included.
Braided Stainless Headlight Conduit
Braided Stainless Headlight Conduit
Braided Stainless Headlight Conduit
Braided Stainless Headlight Conduit
Braided Stainless Headlight Conduit

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

A perfect finishing touch for any headlight installation. Includes 12" braided stainless sheath with polished aluminum ends to secure headlamps and attach conduit to grille shell, fender or frame. Three-color headlight wires included. 

Bend angle should not exceed 45°. Can be cut to fit.

Notes

  1. Long stud is 1-3/8" and short stud is 5/8".

Customer Reviews

Rated 4 out of 5 by 17 reviewers.
RATING BREAKDOWN
17 reviews
5 Stars
8
4 Stars
4
3 Stars
2
2 Stars
3
1 Star
0
RECOMMEND THIS PRODUCT:

robert8
Montgomery Ma.
Product Rating

don't fit 31

March 06, 2015
Not for 31 ford, they may work on other headlights. Need to re-manufacture the light and radiator shell
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

EDRAG
Verified Purchaser
AL
Product Rating

Well built item

April 27, 2013
This is a very good braided head light set for the money, but about average cost. They work great except that if you have a tight or close turn, chances are you will get a kink in the line. Over all it is a very good item and I will buy it again for my other project.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Matt
Verified Purchaser
Sacramento, Ca
Product Rating

Headlight conduit

July 08, 2012
Product came incomplete. called and they made it right.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

the bat
Verified Purchaser
miami fla
Product Rating

odd design ends

April 29, 2011
The end for the headlight mount is way short of being long enought to use in any stand,just bearly gets 1/2 a nut on if mount is only 1/8in. thick,so alum stand of about 1in. thick is not posible at all with this as it is made.
Pros:
  • Lightweight
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Buddy
West Memphis. Arkansas
Product Rating

Great Product!!!!!!!!!

May 13, 2010
Does what it says
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Dan the Man
Verified Purchaser
Palm Bay, Florida
Product Rating

Headlight Conduit is a Must Have

October 31, 2010
I'm not sure why some don't think the wires are long enough but they are for me in my 31 Tudor A Bone Sedan. Very nicely made and look even better. You will love this set of conduits and I'll tell anyone to get this. Won't be sorry you did....Dan
Pros:
  • Excellent
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Mrputz1
Verified Purchaser
Saratoga,Ca
Product Rating

Braided Stainless Headlight Conduit

July 15, 2010
[...]
Pros:
  • Look nice
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

TBFSJR
Verified Purchaser
Red Deer, Alberta
Product Rating

Braided Stainless Steel Headlight condui

March 03, 2012
Looks great on my 30 Vickey, adds class over the old conduit.
Pros:
  • High-Performance
  • Easy To Use
  • Durable
  • Lightweight
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

RumRunner
Wichita, KS
Product Rating

Looks great

January 26, 2010
These conduits worked out great for me.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

none
wi
Product Rating

nice looking functioninal

May 06, 2010
very nice looking for on my car
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 2
91131402

Product Q&A

5 questions : 5 answers

1 answers

Will the 1/2-20 threaded piece unscrew making it a 1/2-20 female thread?

peruart
Peru Ks.
June 24, 2013

Will the 1/2-20 threaded piece unscrew making it a 1/2-20 female thread?

Answers

June 24, 2013
Jason
Sorry, the threaded ends do not unscrew to female threads.
1 answers

What is the thread size, 1/2-20?

Billyray
February 08, 2013

What is the thread size, 1/2-20?

Answers

February 08, 2013
Jason
The ends on these braided headlight conduit is 1/2-20 thread pitch
1 answers

Is there any instructions on how to connect conduit to head light

Ohio
August 31, 2011

Is there any instructions on how to connect conduit to head light

Answers

August 31, 2011
John
These braided headlight conduit can be shortened to desired length and assemble similar to the braided hose fittings. They have male threads that will go through the headlight bucket, grille shell, or frame and be retained on the opposite side by the included nut. They require a .500 hole in the panel they will attach to. A quality product and if questions arise feel free to call and visit with one of our street rod techs.
1 answers

How many wires will fit in the conduit ? I am considering purchasing a headlight / turn signal combo light that will have 5 or 6 wires.

Webster, NY
July 07, 2011

How many wires will fit in the conduit ? I am considering purchasing a headlight / turn signal combo light that will have 5 or 6 wires.

Answers

July 11, 2011
Jason
This conduit comes with three wires. One for ground, one for high beam, and one for low beam. There is some available room for two smaller gauge wires if needed.
1 answers

Will these braided conduits mount to the dietz style head lights?

October 03, 2011

Will these braided conduits mount to the dietz style head lights?

Answers

October 04, 2011
Zach
Speedway part number 91131402. This braided headlight conduit has threads on each end, and so does the Dietz headlight. It will not work well with that light unless you were to modify it. If you want to use the Dietz lights take a look at p/n 91131401. That headlight conduit will work with those lights without modification.
Page 1 of 1

You may also be interested in:

Universal Brass Headlight Mounting Brackets, Polished
(Part #91061002)
                          These 8" tall brackets have an internal hole for a hidden wire. Fully polished brass.   
                    
King Bee Headlights
(Part #91101002)
                        

7" diameter, universal, chrome plated with quartz halogen kit installed. Mounting bolts included. 12 volt.

Wiring Chart (GIF)

Tri-Bar Headlights
(Part #91101004)
                        

Finally an affordable tri-bar headlight! 7" diameter, universal chrome plated steel housing. Uses inexpensive quartz halogen replacment light bulbs. Curved lens is fluted for superior driving vision. Mounting hardware included.

Replacement lens available under p/n 91101005.

Wiring Chart (GIF)

Stainless Steel Headlight Conduit Set, 12 Inch
(Part #91131401)
                        Finish off your headlight wiring with these attractive and affordable polished stainless steel lengths of conduit. Conduit can be used to hide and protect fragile headlight, taillight or horn wires that are exposed to the elements. Two-piece set includes polished stainless ferrules to secure the conduit. Conduit measures 12" long with 3/8" I.D.
                    
Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
(Part #49101900)
                        

No, this is not just another headlight conduit! This is Lokar's design technology for "U-Cut-to-Fit", non-kinking stainless steel headlight braid. Designed with threaded steel studs to insure that you won't experience any of the typical separation between braid and fitting that shows unsightly wires out in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit comes complete with two 14" flexible braided stainless steel Teflon-lined housings, threaded STEEL studs, billet aluminum fittings, aluminum grill shell washers and four 26" headlight wires.

  • Non-kinking stainless steel
  • Threaded steel studs to insure no separation between braid and fitting
  • Comes complete with:
    • (2)Two 14" flexible braided stainless steel Teflon-lined housings
    • Threaded STEEL studs
    • Billet aluminum fittings
    • Aluminum grill shell washers
    • (4)Four 26" headlight wires
Lokar XHL-1900 Black Anchor-Tight Stainless Steel Headlight Braid
(Part #491XHL1900)
                        
No, this is not just another headlight conduit! This is Lokar's design technology for "U-Cut-to-Fit", non-kinking black stainless steel headlight braid. Designed with threaded steel studs to insure that you won't experience any of the typical separation between braid and fitting that shows unsightly wires out in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit comes complete with two 14" flexible braided stainless steel Teflon-lined housings, threaded STEEL studs, billet aluminum fittings, aluminum grill shell washers and four 26" headlight wires.
  • Non-kinking stainless steel
  • Threaded steel studs to insure no separation between braid and fitting
  • Comes complete with:
    • (2)Two 14" flexible braided stainless steel Teflon-lined housings
    • Threaded STEEL studs
    • Billet aluminum fittings
    • Aluminum grill shell washers
    • (4)Four 26" headlight wires