Braided Stainless AN 18 Inch Brake Line

							                        

                                                        
You have finally found that T56 6-speed to put behind your Chevy V-8 and now are ready to hook up the release bearing. We have this neat kit that allows you to hook it up to a common Wilwood master cylinder. Our AN3 braided stainless steel hose is available in three lengths: 25", 36" and 48" lengths.
You will also want to buy the banjo fitting kits and the Wilwood master cylinder. 
NOTE: These lines are for Corvette and GTO specific T56 six-speeds only. Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.
                                                    

						                        

							                        

                                                        
Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 
                                             
                                                                                          
                                                 AN 3 O.D. is .265 and AN 4 O.D. is .305
Select applicable length. AN size is the "-#" at the end of each part number.
                                                    

						                        

							                        

                                                        
You have finally found that T56 6-speed to put behind your Chevy  V-8 and now are ready to hook up the release bearing. We have this neat  kit that allows you to hook it up to a common Wilwood master cylinder.  Our AN3 braided stainless steel hose is available in three lengths: 25",  36" and 48" lengths.
You will also want to buy the banjo fitting kits and the Wilwood master cylinder. 
NOTE:  These lines are for Corvette and GTO specific T56 six-speeds only.  Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.
                                                    

						                        

							                        

                                                        
You have finally found that T56 6-speed to put behind your Chevy  V-8 and now are ready to hook up the release bearing. We have this neat  kit that allows you to hook it up to a common Wilwood master cylinder.  Our AN3 braided stainless steel hose is available in three lengths: 25",  36" and 48" lengths.
You will also want to buy the banjo fitting kits and the Wilwood master cylinder. 
NOTE:  These lines are for Corvette and GTO specific T56 six-speeds only.  Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.
                                                    

						                        

							                        

                                                        Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 
Select applicable length. AN size is the "-#" at the end of each part number.
                                                    

						                        

							                        

                                                        Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 
Select applicable length. AN size is the "-#" at the end of each part number.
                                                    

						                        

							                        

                                                        Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 
Select applicable length. AN size is the "-#" at the end of each part number.
                                                    

						                        

							                        

                                                        
Stainless hose
Teflon-lined
Steel Swivel Ends
-4 fittings 
Used for brakes or gauges 
                                                    

						                        

							                        

                                                        
Stainless hose
Teflon-lined
Steel Swivel Ends
-3 fittings 
Used for brakes or gauges 
                                                    

						                        

							                        

                                                        Complement your -2 brake line kit by completing the system with -2 caliper lines. Durable and flexible stainless steel AN2 lines with AN3 female fittings.  
                                                    
						                        

							                        

                                                        Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 
Select applicable length. AN size is the "-#" at the end of each part number.