Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Boom Tube Small Block Chevy Zoomie Headers for Sprints

SAME DAY SHIPPING! Order within the next 8 hours 4 minutes and receive same day shipping

Free Shipping Free Shipping
Specs
Material Type:
Steel
Sold in Quantity:
Pair
Flange Style:
Rectangular Port
Header Tube Type:
Zoomie
Gasket(s) Included:
Yes
Hardware Included:
Yes
Garage Sale:
No
Tube O.D.:
1.75
Flange Thickness:
.31
Drivers Side Dimension A:
9.60
Drivers Side Dimension B:
13.30
Drivers Side Dimension C:
21.75
Passenger Side Dimension A:
10.50
Passenger Side Dimension B:
13.85
Passenger Side Dimension C:
21.88
Notes
Furthest primary tubes stick out on the passenger side at the first bend is 4.80". Furthest the primary tubes stick out on the driver's side at the first bend is 4.25"
Boom Tube Small Block Chevy Zoomie Headers for Sprints
Boom Tube Small Block Chevy Zoomie Headers for Sprints
Boom Tube Small Block Chevy Zoomie Headers for Sprints
Boom Tube Small Block Chevy Zoomie Headers for Sprints
Boom Tube Small Block Chevy Zoomie Headers for Sprints

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Zoomie style headers with extra-thick flanges and 1-3/4" primaries. Ready to bolt on and go. Will not fit wide cars. Fits Standard port S/B Chevy heads only.

Item Details

Header Dimension Explanation Chart

Customer Reviews

Rated 4.5 out of 5 by 11 reviewers.
RATING BREAKDOWN
11 reviews
5 Stars
8
4 Stars
1
3 Stars
1
2 Stars
1
1 Star
0
RECOMMEND THIS PRODUCT:

Henry J Racer
Verified Purchaser
Verified Reviewer
Charlotte,NC

Great gasser style pipes

July 01, 2015
These pipes will go on my blown alky Henry J. They will be perfect for the gasser look.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

dave88
Verified Purchaser
minnesota

great quality

February 24, 2015
I ended up using the headers to go out my fenders worked great the welds holding the tubes together sucked to get apart but if someone were to use them as they were designed they would hold up amazingly. The shipping paint was gorgeous its a shame you have to remove it
Pros:
  • durabilty
  • perfict fit
  • Quality
Cons:
  • made to well
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Eastside
Verified Purchaser
Kiel, WI

Check your application

October 01, 2014
Something is wrong, either the picture or the dimensions. The dimensions say the headers should have an "A" measurement of 9.60" on the drivers side and 10.50". The headers I received did not , they where about 4+" on each side. Being the talented guy I am I extended the tubes to fit my application. The part as received is priced right and the quality is good.
Pros:
  • Nice piece
Cons:
  • check application to picture
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

Eastside ??_ Thanks for your review. We appreciate hearing from you. Your review has been passed along to our Customer Service team to review the situation and our QC team to record and inspect the issue with this product. We apologize for any inconvenience this may have caused and are always happy to help!
Ratracer29
Verified Purchaser
Charleston, SC, USA

Quality parts

August 03, 2014
Super fast delivery and great customer support friendly people I will do business with again without hesitation!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

wickerman
Verified Purchaser
baton rouge,la.

made very nice

July 05, 2014
you need to have some kind of baffels to fit too loud without
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

FranktheCrank
Verified Purchaser
Rhode Island, USA

These zoomies are built quite well, and

January 05, 2014
The zoomies I purchased are for a custom application. Having a custom set bent, fabricated, and fitted, would have been quite expensive. The low cost of Speedway's Boom Tube Zoomies, has allowed me to purchase them, and modify them (heating and bending), to work in my application,......at a fraction of the cost it would have been for a custom set.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Larry
Verified Purchaser
Oak Hills, California

Great Prodoct

July 16, 2012
Really nice product for the price. I used them on my engine test stand and am very pleased. I would highly recommend this product.
Pros:
  • Really great product
  • Easy To Install
  • Adds Style
  • Great Sound
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

JP
Verified Purchaser
Kenner La, 70065

WOW these are way Kool

April 03, 2012
these are really Kool , sound great with the cam shaft , sounds like the engine is talking to you , real good bumpy bump, not every one likes the noise, OH well.
Pros:
  • Great Sound
  • Increases Power
  • Easy To Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

harry
Verified Purchaser
Ridge Farm, Illinois

great item for my use, would buy again

February 27, 2012
I use this for startup engine stand. Product fit well no problem mounting. Very happy with price.
Pros:
  • Fits great looks good
  • Easy To Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Hotforged
Verified Purchaser
Phoenix,AZ

Sbc Boom Tubes

January 06, 2012
I could not build these for the price. Well built and east to modify for my needs
Pros:
  • Easy To Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 2

Product Q&A

12 questions : 13 answers

2 answers

I understand the outside diameter of these tubes are 1.75 inches, what is the thickness dimension of the tubes? Also, what material are these made of?

koosh
February 17, 2015

I understand the outside diameter of these tubes are 1.75 inches, what is the thickness dimension of the tubes? Also, what material are these made of?

Answers

February 25, 2015
dave88
Dont know material guess steel but inside it's an inch and a half
February 17, 2015
EricM
These headers are made of 16 gauge mild steel tubing. 16 gauge tubing is .060" thick so the inside diameter of the tubing is approximately 1 5/8"
1 answers

boom tube zoomies black part number 930-1700 will they fit you 1923 deluxe T-Bucket kits with chevy 305 and the vega cross steering set up like you have on the kit and do they come with baffles or will i have to fabricate my own

jab64
Ingram, TX, USA
February 12, 2015

boom tube zoomies black part number 930-1700 will they fit you 1923 deluxe T-Bucket kits with chevy 305 and the vega cross steering set up like you have on the kit and do they come with baffles or will i have to fabricate my own

Answers

February 12, 2015
EricM
These Boom tube zoomies do not come with baffles and the best source would be a motorcycle shop for availability. Clearance for your four bar tubes is questionable without modifications.
1 answers

Will these fit outside of the 1927 chassis that you sell?

BKGUNS
November 21, 2014

Will these fit outside of the 1927 chassis that you sell?

Answers

November 21, 2014
Tech
These will generally fit most T bucket frames, however your motor mount configuration and steering linkage can be a problem depending on the situation.
1 answers

what is the overall length of the tubes as well as the length before the end of the tubes that level out

February 09, 2011

what is the overall length of the tubes as well as the length before the end of the tubes that level out

Answers

February 16, 2011
Tige
Thanks for looking at our boom tube headers. The lengths of the tubes vary on each tube. There’s one that measures 21”, 20”, 19.5”, and 18”. They are 5” from the end where they level out. They have the standard Chevy bolt pattern and come with gaskets.
1 answers

WILL THESE HEADERS FIT ANGLE PLUG HEADS?

RAT ROD TOM
RICHMOND VA.
January 14, 2011

WILL THESE HEADERS FIT ANGLE PLUG HEADS?

Answers

January 19, 2011
Tom
In most cases our catalog or website will stipulate if set of headers will not work with angle plug heads. Without information to the contrary, it would appear these headers will work with your angle plug heads.
1 answers

Will these fit a LT1 motor and a 1932 ford frame rail?

Allen
Virginia Beach, VA
July 26, 2011

Will these fit a LT1 motor and a 1932 ford frame rail?

Answers

July 27, 2011
John
These boom tube headers stem from our Sprint Car catalog but have been used on many applications. From the flange to the inside of the bend is 3” and from this point on they extend down and rearward. From top of flange to bottom of tubes is 13” and from front of flange to furthest rearward point of last tube is 21”.
1 answers

How far do the headers come out from the flange before turninng down? Also do the headers drop straight down or angle outward?

Eyeball Bob
Chapin, SC
July 19, 2011

How far do the headers come out from the flange before turninng down? Also do the headers drop straight down or angle outward?

Answers

July 19, 2011
Jason
We have the following measurements Width if header at widest point from exhaust port - 4" Height of header from top of flange to lowest point - 13" Lenght of header from front of flange to collector(end of tube) - 21" Headers come out about a 1" before bending down and go down at an angle, not straight down
1 answers

WHAT IS THE "A" AND "B" DIMENSION ON THIS HEADER THANKS

HDFARO
ODESSA TX
May 22, 2011

WHAT IS THE "A" AND "B" DIMENSION ON THIS HEADER THANKS

Answers

May 23, 2011
Jason
The "A" dimensions are 4", the "B" dimensions are 13", and the "C" dimensions are 21".
1 answers

Does anyone make this type header for Brodix spread port heads?

Jaker
Sedalia, CO
May 17, 2011

Does anyone make this type header for Brodix spread port heads?

Answers

May 17, 2011
Jason
The closest thing I offer is part #9301702
1 answers

Will these boom tubes zoomies fit on a 73 Chevy Monte Carlo with a 350?

Thirsten
Milford, NE
April 20, 2015

Will these boom tubes zoomies fit on a 73 Chevy Monte Carlo with a 350?

Answers

April 21, 2015
John
Expert
These Zoomie headers are for the Sprints will not work on a Monte Carlo. The Boom Tubes number 917130 would be the best ones to try in that style.
Page 1 of 2

You may also be interested in:

Boom Tube Small Block Chevy Zoomie Headers for Sprints, AHC Coated
(Part #9301700H)
                        

Zoomie style headers with extra-thick flanges and 1-3/4" primaries. Ready to bolt on and go. Will not fit wide cars. Fits Standard port S/B Chevy heads only. These ceramic coated headers provide superior performance and durability.

Item Details

Header Dimension Explanation Chart

Boom Tubes Small Block Chevy Zoomie Header Kit, 1-3/4Inch Primaries
(Part #9301699)
                        

Zoomie style header kit designed for use with standard port small block Chevy heads.  Features extra-thick flanges and 1-3/4" primaries.

  • Includes extra-thick flanges and 1-3/4" primaries
  • Fits standard port S/B Chevy heads