Steve Smith Autosports S294 Book - Quarter Midget Chassis Technology
Click image to enlarge
Q & A
What's in the Box
No questions have been asked.
You may also be interested in:
Simpson Individual Arm RestraintsMore InfoCompare
Simpson Quarter Midget Cage NetPrice: $59.99More InfoCompare
Simpson 5-Point Harness, Wrap Around, Quarter Midget Seat BeltMore InfoCompare
Bell K1 Sport SA10 Racing Helmet$429.99More InfoCompare
Bell GP2K Kart Racing HelmetPrice: $489.99More InfoCompare
Bell Vador SA2010 Racing Helmet$459.99More InfoCompare
Bell GP2 Youth Racing Helmet, Youth SeriesPrice: $299.99More InfoCompare
Impact NecksGen REV Head and Neck Restraint SystemMore InfoCompare
These Simpson individual arm restraints have padded arm bands and stainless steel hardware. 14" attachment straps. Available in red, blue or black.
Just the right size for quarter midgets.
The simpson quarter midget cage net can be adjusted from 23" to 28" in length. It is 7-1/2" wide at widest point.
Choose either black, blue, or red.
Built specifically for Quarter Midget racers. Wrap around style (pull down) with latch & link buckle.
- Crotch strap - 15"
- Should Strap - 33"
- Waist Strap - 44"
Item DetailsWrap-around Style
The Bell K1 Sport is a multi-use, full featured racing helmet with aero styling and Bells innovative Dominator chin bar design. The K1s aerodynamic features enhance the helmets stability in high-speed racing environments. The Snell SA2010 rated K1 Sport is a great race helmet for open wheel racers or kart racers who plan on moving into other forms of racing that require fire retardant helmets.
The K1 Sport features a lightweight composite shell, comfortable interior fit and maximum ventilation with full chin bar, forehead and top vents. The K1 Sport Racing Helmet takes a 276 SRV Shield and each helmet comes with a clear shield and Bell visor strip as standard equipment.The K1 Sport Helmet also features Bells redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can customize the fit of the K1 Sport Helmet by using Bells Cheek Pad Inserts in 5mm, 10mm, 15mm and 20mm sizes to tighten the fit in the cheek area. The race helmet is available in White and flat black finish - the rubberized surface is more resistant to finger prints and smudges than traditional flat finishes. The K1 Sport is pre-drilled for use with head and neck restraint devices.
Bell Helmet Sizing Chart (PDF)
Item DetailsMulti-use, full featured helmet.
The GP2K racing helmet is certified to the Snell K2010 standard which requires the helmet to be tested to the Snell SA2010 standard test criteria but does not require the helmet to be fire retardant.
The GP2K race helmet takes a 287 SRV Shield which features the SRV-1 pivot system and thumb tab on the drivers left side to allow for easy shield operation. Each helmet comes with a clear shield and Bell visor strip as standard equipment. The GP.2K also features Bells redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can also customize the fit of the GP2K by using Bells Cheek Pad Inserts to tighten the fit in the cheek area. In addition, replacement face piece kits are available for the GP2K in the event the front interior chin piece needs to be replaced. Available in White.
Bell Helmet Sizing Chart (PDF)
Item DetailsThis is the karting only version of the GP.2 helmet.
The Vador is a complete design departure for Bell, incorporating an aggressive blunt nose design and pilot style shield. Designed primarily for use in drag racing, karting and dirt track, the Vador is certified to the Snell SA10 standard.
The Vador features a lightweight composit shell, comfortable interior fit and rear facing vents to prevent dirt from entering the helmet. The Vador takes a 289 SRV (3MM) shield with thumb tab on the left side to allow shield operation, SRV-1 visor system and new rubber eyeport gasket for improved visor seal. Comes with a clear shield and visor strip.
The Vador features Bells redesigned face piece with recessed areas that allow for seamless radio integration and installation. Racers can also customize the fit by using Bells Cheek Pad Inserts to tighten the fit in the cheek area. The helmet is available in a flat black surface that is more resistant to finger prints and smudges.
The Vador is set up for use with Head and Neck Restraint devices and features Bells M6 terminal hardware that is incorporated into the helmet. It accepts anchor system hardware. (Consult with the Head and Neck Restraint manufacturer to select an anchor system that allows the user to index the hardware in the proper location for use with the device.)
Item DetailsAggressive blunt nose design and pilot style shield. Designed primarily for drag racing, karting, and dirt track racing.
The GP.2 Youth helmet is designed for young racers who need an extra small size helmet that is fire retardant. The GP.2 Youth has the same design features as the adult GP.2 model. The GP.2 Youth is SFI 24.1 certified – the SFI 24.1 standard is accepted by various youth racing and karting organizations including the Quarter Midget Association of America (QMA). Metallic Silver
- Formula Style Helmet
- Advanced Aerodynamic Styling
- Air Intake To Maximize Forehead Ventilation
- Direct Flow Chin Bar Ventilation
- Youth Size Shell
- Lightweight Composite Shell Technology
- Standard Eyeport
- Positive Seal Visor System
- 287/3MM SRV Shield (SRV-1 Pivot System)
- E-Max Plus Multi Density Liner
- Pro Style Comfort-Plus Interior
- Removable/Replaceable Cheek Pads
- SFI 24.1 Youth Certification
- Available in sizes 4XS to XS
Item DetailsSame design features as the adult
GP.2 helmet. SFI 24.1 certified.
The Impact NecksGen is a revolutionary head and neck restraint designed specifically with adjustablilty, angular impact protection, comfort, and affordability in mind. Manufactured from a lightweight carbon fiber DuPont composite material, the Impact NecksGen weighs a mere 1.8 pounds and features unique body forming shoulder pads minimizing the pressure points on the collarbones. Designed with a single adjustable lateral helmet tether, the Impact NecksGen unit provides an alternate load path for superior side on impact protection.
- SFI 38.1
- Comes with one helmet post kit
- Patent pending tension neutralizing tether provides superior lateral and frontal support
- Weighs just over 1 lb.
- Allows for quick entry and exit of the car
- Ergonomic design offers little to no interference with seat or helmet
- Carbon fiber composite construction
- Works in any race car and every seat angle
- Available in Small, Medium, or Large