Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Book - How to Build High Performance Chevy LS1-LS6 V8s

SAME DAY SHIPPING! Most orders ship within 24 hours.

Book - How to Build High Performance Chevy LS1-LS6 V8s
Book - How to Build High Performance Chevy LS1-LS6 V8s

Click image to enlarge

Speeday Motors Logo
X
Book - How to Build High Performance Chevy LS1-LS6 V8s

Details

Reviews

Q & A

What's in the Box

The LS1/LS6 family of engines are quickly becoming the engine of choice for high performance street and race applications. Learn what it takes to build these engines right in this engine building book. 600 photos. 160 pages. 

You may also be interested in:

Edelbrock 7118 Performer RPM LS1 Manifold & Timing Control Module
                        

Some people would prefer to have a good old 4 barrel carburetor instead of fuel injection. This Edlebrok LS1 4 barrel Intake allows you to do just that and includes the MSD box and harness to run the ignition system.

This powerful new manifold is designed for the popular Chevrolet LS1 (5.7L) small-block V8 originally used in 1997 and later Corvettes and 1998-02 Camaros and Firebirds. It also fits the Corvette LS6 engine and any other Gen III engine including the LM7 (5.3L), LR4 (4.8L), and LQ4 (6.0L). It allows the use of a carburetor on these originally computer-controlled engines, offering maximum power and a broad torque curve from 1500 to 6500 rpm. This manifold made 410 hp and 418 ft/lbs. of torque in dyno tests. The Performer RPM LS1 includes a wiring harness and unique electronic Timing Control Module made by MSD® which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and trans bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included, making the LS1 engine an easy retro-fit into any muscle car, street rod or marine application. 

325-7118 Instructions (PDF)


Lokar ED-5008 1997-04 GM LS1 Engine Dipstick
                        Get rid of that ugly OEM dipstick and replace it with this clean Lokar piece. It's the best dipstick you can buy for your 97 and up LS1.
                    
Lokar TCB-40LS1 1998-99 LS1 Throttle Cable Bracket, Single
                        Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control or kickdown cable. Designed to work with part #491-1000LS1.
                    
Lokar TCB-40LS13 2000-04 LS1 Throttle Cable Bracket, Single
                        Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control or kickdown cable. Designed to work with part #491-1000LS1.
                    
Lokar TCB-40LS12 1998-99 LS1 Throttle Cable Bracket, Double
                        Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control cable. Designed to work with part #491-1000LS1.
                    
Lokar TCB-40LS14 2000-04 LS1 Throttle Cable Bracket, Double
                        Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control cable. Designed to work with part #491-1000LS1.
                    
Speedway GM Engine Wiring Harness, 1999-02 LS1
                        

Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible. Standard length harnesses are 54" from the back of the engine to the PCM connectors.

1999-2002 LS1

  • Made from premium grade GXL jacketed automotive wire
  • Most wiring is larger gauge than stock application for durability
  • No splices to reduce points of failure
  • All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping
  • Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification
  • All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks
  • Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation
  • Diagnostic connector or OBD2 port for connection to scanners and tuning tools
  • Made in the USA.
Lokar TC-1000LS148 Universal LS1 / 350 Ramjet Throttle Cable, 48 Inch
                        You will need the correct throttle cable for your LS1 / 350 Ramjet engine swap. This cut-to-fit cable looks good and gets the job done.
                    
Book - How to Build and Modify LS-Series Engines
                        

For those who want to build or modify their LS engine, this book provides the most detailed and extensive instructions ever offered. Whatever your performance goals might be, How to Build and Modify GM LS-Series Engines shows you what modifications are needed and how to make them. Premier LS engine technician Joseph Potak addresses every question that might come up, covering topics including crankshafts and piston assemblies, cylinder heads, camshafts, valvetrain, block modifications, intake manifolds, fuel system, header selection, and setting up ring and bearing clearances for particular uses. In short, this book is the ultimate resource for building the ultimate LSX engine.

By Joseph Potak. Paperback, 176 pages with 300 color photos. 8.25" x 10.625"

 

Quick Time Performance 10100 QTP LSx Engine Lift Plate
                        The days of scratching the paint in your engine bay are over. This polished stainless steel 1/4" thick lift plate allows you to safely and precisely install or remove your LSx engine by its valley cover bolts. It fits all Gen III and IV GM motors 1997 and newer. Includes a Grade 8 nut and bolt.
                    
Lokar XTCB-40LS1 Black LS1 Throttle Bracket, 1998-99 GM, Single Stud
                        

This billet aluminum bracket mounts to the side of the LS1 manifold and is comes with a single stud for throttle only. 

Lokar XED-5008 1997-Up LS1 Midnight Series Flexible Engine Dipsticks
                        Flexible Engine Dipstick designed with billet aluminum handle to   coordinate with Lokar's Flexible Transmission Dipstick.  Slim design   allows mounting inside headers.  Designed for use with factory,   Sanderson cast manifolds or block hugger headers.   E-Z read flexible  inner dipstick measuring cable for accurate measure of engine oil.
                    
Lokar TCP-1000LS1 36 In Polished LS1/350 Ramjet Hi-Tech Throttle Cable
                        

Looking for more shine in your engine compartment? Try Lokar's Polished Hi-Tech Throttle Cables. Lokar's polished cables are available in stainless steel braided housing or black housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with polished aluminum fittings and polished aluminum ferrule to eliminate fraying. "U-Cut-to-Fit" outer housing is available in 36" lengths with a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Cables mount nicely with Lokar's array of bracket and return springs (sold separately). Kits complete with installation instructions. Pair up with a polished kickdown.

  • 36" long
  • GM LS1/Ramjet applications
  • Specially extruded liner for extended life of the cable
  • Aluminum fittings with ferrule to eliminate frayed cable ends
  • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
  • Complete instructions included

Throttle Body and Carb End Fittings Guide (Link)

491-001000 Instructions (PDF)

Lokar ED-5019 GM LS Flexible Engine Dipstick, 1999-Up Trucks
                        Flexible Engine Dipstick designed with billet aluminum handle to   coordinate with Lokar's Flexible Transmission Dipstick.  Slim design   allows mounting inside headers.  Designed for use with factory,   Sanderson cast manifolds or block hugger headers.  E-Z read flexible  inner dipstick  measuring cable for accurate measure of engine oil.
                    
Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
                        Lokar Hi-Tech Throttle Cable features a stainless   steel braided  housing.  They are designed with a specially extruded liner for extended    life of the cable – not to be confused with ordinary braided brake    hose.  Cables are equipped with aluminum fittings and aluminum ferrules    to eliminate fraying.
Kits come complete with installation instructions.