Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Bilstein F7B462010ZD Steel 2 In Shock 7 In Stroke w/ Ends Comp 9/Reb 1

SAME DAY SHIPPING!

Specs
Material Type:
Sold in Quantity:
Each
Finish:
Zinc
Inside Diameter:
46
Extended Length:
20.00
Compressed Length:
13.14
Shock Type:
Mono Tube
Shock Eyelet Width:
.630
Bushing Length:
.625
Bushing Diameter:
.500
Hardware Included:
No
Bushing Material:
Steel
Body Diameter:
2.00
MFG. Part #:
S7Z1090
Adjustability:
Non-Adjustable
Valve Positions:
90 compression - 10 rebound
Upper Shock Mount:
1/2 Inch Eyelet
Lower Shock Mount:
1/2 Inch Eyelet
Shock Body Material:
Steel
Bolt Hole Circle:
.500
Coil-Over Compatible:
Yes
Garage Sale:
No

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Item Details

Rebound: 1
Comp.: 9

You may also be interested in:

Coilover Kits, 2 Inch Body, 5 Inch Coilover Sleeve
                        These coil over kits fit bearing end shocks with no modifications necessary. Available for Pro Shocks, Carrera, Monroe, QA1 or Bilstein coil-over compatible shocks.  

Coilover kit works with 2 1/2" I.D. springs and 2" O.D. body shocks. The Carrera kit can be used on Bilstein shocks by adding a thick (.120") washer in the spring seat cup.

910-46236 Instructions (PDF)

QA1 5079-1 Steel Bearing End Shock, 7 Inch Stroke, 9/1 Valving
                        

Removable bearing mount allows installation of rubber bumpers or shock extensions. Can also be used with coil-over mount kits - slight drilling of upper spring mount required.

  • Racer Revalveable & Rebuildable
  • No Valving Overlap
  • Precision Machined Piston with P.T.F.E. Piston Band
  • 15mm Centerless Ground, Hard Chrome Plated, Solid Piston Rod
  • Deflective Disc Valving
  • Twin Tube Design
  • 2" O.D. Steel Body
  • Can Be Run Upside Down
  • Use Large Body Tuning Kit # TK01 For Valve Combination Changes Between 0-13

QA1 Bearing End Shock Chart (GIF)

 

This is garage sale priced because it has been discontinued.

 

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

QA1 5073 Steel Bearing End Shock, 7 Inch Stroke, 3/3 Valving
                        

Removable bearing mount allows installation of rubber bumpers or shock extensions. Can also be used with coil-over mount kits - slight drilling of upper spring mount required.

  • Racer Revalveable & Rebuildable
  • No Valving Overlap
  • Precision Machined Piston with P.T.F.E. Piston Band
  • 15mm Centerless Ground, Hard Chrome Plated, Solid Piston Rod
  • Deflective Disc Valving
  • Twin Tube Design
  • 2" O.D. Steel Body
  • Can Be Run Upside Down
  • Use Large Body Tuning Kit # TK01 For Valve Combination Changes Between 0-13

QA1 Bearing End Shock Chart (GIF)

 

This is garage sale priced because it has been discontinued.

 

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

Shock Extensions for Small Body Pro Shocks, 1 Inch, 1/2-20 Thread
                        

Works with Pro Shocks small body shocks and shock end #582-275 only.

Steel shock stud extenders.

Extensions fasten directly to Pro Shocks small body shock absorbers for added suspension travel.

  • 1 Inch, 1/2-20 Thread
  • Sold as a pair.

 

Bilstein S7Z3030 Steel 2 Inch Shock-7 Inch Stroke w/ Ends-Comp 3/Reb 3
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z3040 Steel 2 Inch Shock-7 Inch Stroke w/ Ends-Comp 4/Reb 3
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z3050 Steel 2 Inch Shock-7 Inch Stroke w/ Ends-Comp 5/Reb 3
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z3060 Steel 2 Inch Shock-7 Inch Stroke w/ Ends-Comp 6/Reb 3
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z3545 Steel 2 Inch Shock w/ Ends 7 Inch, Comp 4.5/Reb 3.5
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z4010 Steel 2 Inch Shock-7 Inch Stroke w/ Ends-Comp 1/Reb 4
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein F4B460210ZX Steel 2 In Shock 7 In Stroke w/ Ends Comp 4/Reb 4
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein F4B460210ZR Steel 2 Inch Shock 7 Inch Stroke Comp 5.5/Reb 4.5
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z5030 Steel 2 Inch Shock-7 Inch Stroke w/ Ends-Comp 3/Reb 5
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein F4B460210ZW Steel 2 In Shock 7 In Stroke w/ Ends Comp 5/Reb 5
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z5555 Steel 2 Inch Shock w/ Ends, 7 Inch, Comp 5.5/Reb 5.5
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein F4B460210YD Steel 2 In Shock 7 In Stroke w/ Ends Comp 4/Reb 6
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z6060 Steel 2 Inch Shock-7 Inch Stroke w/ Ends-Comp 6/Reb 6
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S9Z2020 Steel 2 Inch Shock-9 Inch Stroke w/ Ends-Reb 2/Comp 2
                        

These Bilstein mono tube gas shocks feature the latest development in shock valving technology; digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps.

Bilstein has set the standard for years in Indy Car, NASCAR, and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel

23.44" extended, 14.94" collapsed, 19.75" mounting, 8.5" travel.

Bilstein Shock Application Chart (GIF)

Bilstein DP1 Shock Package, Set/4
                        Take away the guess work and make it easier to fine tune your chassis adjustments! Now it's easy to order the correct shocks for your IMCA dirt modified. These Bilstein DP-1 steel race shocks are factory calibrated to achieve the correct valving at each wheel. They are the basic setup for an average track with average conditions. 
  • Monotube body dissipates heat more effectively than twin-tube designs
  • Nitrogen gas puts shock oil under pressure to totally prevent shock fade
  • Allows for more precise, consistent set-ups
  • Weight transfer when you need it
  • Tires will stay on the track through the rough spots
  • Better control under braking

Shocks also available separately for easy replacement.

Bilstein S7Z2020 Steel 2 Inch Shock-7 Inch Stroke w/ Ends-Comp 2/Reb 2
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z2040 Steel 2 In Shock 7In Stroke w/ Ends Comp 4/Reb 2
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z2060 Steel 2 Inch Shock-7 Inch Stroke w/ Ends-Comp 6/Reb 2
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z4020 Steel 2 Inch Shock-7 Inch Stroke w/ Ends-Comp 2/Reb 4
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z5570 Steel 2 Inch Shock 7 In. Stroke & Ends Comp 7/Reb 5.5
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein F4B460210ZJ Steel 2 In Shock 7 In Stroke w/ Ends Comp 1/Reb 6
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z6020 Steel 2 Inch Shock-7 Inch Stroke w/ Ends-Comp 2/Reb 6
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein S7Z6065 Steel 2 In Shock 7 Inch Stroke w/ Ends-Comp 6.5/Reb 6
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein F4B460210ZY Steel 2 In Shock 7 In Stroke w/ Ends Comp 3/Reb 7
                        

These Bilstein mono tube gas shocks feature digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. 

Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

  • Comp. Length: 13.14"
  • Ext. Length: 20"
  • Body Dia.: 2"

Bilstein Mono Tube Gas Shock Chart (GIF)

Bilstein SNS Steel Shock, 7 Inch Stroke, Comp/Reb: 9/1
                        
  • Shock of choice for Wissot and UMP racers
  • Includes steel cap with Schrader Valve
  • Rebuildable: shock can be assembled and disassembled for rapid repair or valving change
  • Nickel plated for rapid heat dissipation
  • World class performance at a SN (Saturday Night) price!
  • Bilstein's famous consistent, fade-free performance
  • Valve stacks and valving kits available separately
  • Coilover kit sold separately
  • 46mm (1.81") diameter steel body
  • Steel Cap with Schrader Valve
  • 7" Stroke

Designed for, but not limited to:  Modifieds, Late Models, and Sprint Cars.

Bilstein SNS Steel Shock, 9 Inch Stroke, Comp/Rebound: 6/2
                        
  • Shock of choice for Wissot and UMP racers
  • Steel cap with Schrader valve
  • Rebuildable - shock can be assembled and disassembled for rapid repair or valving change
  • Nickel plated for rapid heat dissipation
  • World class performance at a SN (Saturday Night) price!
  • Bilstein's famous consistent, fade-free performance
  • 46mm (1.81") diameter steel body
  • Valve stacks and valving kits available separately
  • Coil-over kit sold separately

Designed for, but not limited to: Modifieds, Late Models, and Sprint Cars.