Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy

Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

  • Mounts low on driver's side
  • Two positions for superior adjustability 
  • Works with short style water pumps
  • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
  • Works with stock steel or aluminum aftermarket pulleys
  • Choose black or chrome finish

Power Steering Tech Questions/Tips (Link)

Power Steering Application Tech Questions/Tips (Link)

Notes

Bracket mounts to the lower left front of the block using the two lower bolt holes located by the timing chain cover (the old front motor mount holes).  The adjusting arm mounts to the lower water pump hole.

Bracket will fit a wide range of applications due to its two mounting positions: LOW and HIGH

Bracket fits a G.M. Saginaw power steering pump with attached reservoir.

Brackets are made of 1/4" mild steel plate for strength and durability.

All brackets are made in the U.S.A.  Brackets come  completely assembled with all stainless steel bolts and washers, an illustrated instruction sheet and belt size recommendations with adjusting tips.

If power steering is used with bracket # 91667920, the power steering belt makes use of the third groove (farthest foward groove) on a three groove pulley (our pulley # 91015480). 

Item Details

Works with short style water pumps.

Customer Reviews

Rated 5 out of 5 by 4 reviewers.
RATING BREAKDOWN
4 reviews
5 Stars
4
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

abone
Verified Purchaser
Fort Myers, FL, USA
Product Rating

Someting that fits

February 03, 2015
This bracket had nice chrome to match the chrome steering pump and everything bolted together like it should, couldn't have been easier
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Dirt runner
Verified Purchaser
Bend, OR.
Product Rating

Excellant product

June 22, 2012
Pro looking; thick and sturdy. Had to remove a slight amount... stood out about eighth inch too much, otherwise very easy, nice mounting.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Craig
Verified Purchaser
Colorado
Product Rating

Power steering

June 03, 2012
Works great looks good too.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

niff
Verified Purchaser
Product Rating

thumbs up

June 11, 2014
bracket worked as promised. easy instructions - easy installation
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1
91667920

Product Q&A

1 questions : 1 answers

1 answers

will this fit on my 350 small block with a short corvette water pump. will it hold the factory power steering pump

Crazyrays
Redding Ct
December 10, 2014

will this fit on my 350 small block with a short corvette water pump. will it hold the factory power steering pump

Answers

December 11, 2014
EricM
This bracket set will work on the pump in the photo you sent by removing the existing brackets, using the lower thru bolt for the pivot bolt and the upper outer bolt for the adjuster arm. The pulley will make the difference between the short pump and long pump and may need to be changed to match your needs.
Page 1 of 1

You may also be interested in:

Bills Hot Rod Co. Small Block Chevy A/C and Alternator Brackets
(Part #91667919)
                        

Fabricated from mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Accepts Sanden or Sankyo 508 A/C unit and stock GM alternators and power steering pumps.

For use with '55-'68 short-style water pumps only. Not for use with Vortec cylinder heads.

Black Double Groove Power Steering Pulley, Chevy
(Part #91038808)
                        Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
  • Chevy V8 2-Groove Power Steering Pump Pulley
  • "Keyway" Type
  • Satin black finish
  • For use with short water pumps
Black Single Groove Power Steering Pulley, Chevy
(Part #91038809)
                        Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
  • Chevy Single Groove Power Steer Pump Pulley
  • Stock"Shallow" variety
  • Keyway Type
  • Satin black finish
  • For use with short water pumps
Lightweight Black Double Groove Crank Pulley, Chevy
(Part #91038811)
                        Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
  • Chevy Two Groove Crank Pulley
  • Stock"Shallow" variety
  • For short water pump
  • Satin black finish
  • Replaces GM # 374403
  • Can be used in conjunction with single groove pulley # 910-38812 for 3-groove pulley combo
Lightweight Black Crank Pulley- 3rd groove, Chevy
(Part #91038812)
                        Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
  • Crank pulley to use in conjunction with pulley # 910-38811 to make 3rd groove
  • For short water pump
  • Satin black finish
  • Replaces GM # 3751232
Small Block Chevy Aluminum Triple Lower Pulley, Short Pump
(Part #91015480)
                        

Cast aluminum 3-groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.

  • Precision machined aluminum construction
  • Lightweight and strong
  • Three grooves for 3 V-belts

Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump