Billet Style Aluminum Breather With PCV Valve
Click image to enlarge
Q & A
What's in the Box
You may also be interested in:
Ball Milled Billet Aluminum Oval Air Cleaner, 12 InchMore Info
Weld or Bolt-On Fill CapMore Info
Finned Valve Cover BreathersMore Info
Finned Valve Cover Breathers with PCVMore Info
Garage Sale - Total Performance Aluminum Valve Cover Breather, PCV$49.99Price: $39.99More Info
OTB Gear 6801 Finned Valve Cover Breather, 3 Inch Diameter, 1 Inch NeckPrice: $43.99More Info
Billet Style Aluminum Breathers Without PCV ValveMore Info
Billet Valve Cover O-Ring Oil FillMore Info
Push-In Style Oil Breather CapsMore Info
Theses highly polished aluminum air cleaners have the look of billet without the expense. This 12" Ball-Milled Air Cleaner is cast aluminum, approximately 1/4" thick, polished, and the grooves you see are actually ball-milled. Even the base is 1/4" cast aluminum and polished. Fits carburetors with 5-1/8" air horns. Measures 12" long x 8-3/8" wide x 3" high.
- Ball-Milled Air Cleaner
- Highly polished cast aluminum
- Fits carburetors with 5-1/8" air horns
- 1/4" thick
- 12" long x 8-3/8" wide x 3" high
Billet aluminum cap and base. Weld or screw to your valve cover, oil tank or rear end. Knurled cap with O-ring seal.
- 1-1/4" inside diameter
- 1-1/4"-12 thread pitch
Note: If using this fill cap in a bolt-on manner, (3) #4 screws/bolts with a countersunk head are required (not included). Bolt hole size is 1/8".
Nostalgic finned valve cover breather. Use with grommet 550-6375 to fit a 1-1/4" I.D. hole (typical aftermarket valve cover).
Nostalgic finned valve cover breather with built in PCV insert. Use with grommet 550-6375 to fit inside a 1-1/4" I.D. hole (typical aftermarket valve cover).
Billet aluminum valve cover breathers from Total Performance. Includes the grommet.
This is garage sale priced because it has been discontinued.
NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
This finned valve cover breather is a classy addition to your engine. Constructed from aircraft grade A356 aluminum, it is polished to meet show quality standards.
- 3" in diameter with a 1" neck
- Fits into grommet with 1" hole
- High quality polished aluminum construction
- Made in USA
Polished aluminum breathers come with rubber grommets for 1.250" hole.
This is a handy little item. Basically, it's a bolt-in breather opening for a valve cover that can be used to install a breather cap, an oil fill cap, or a breather with a PCV valve.
To install this item, you must make a 1-7/16" hole in the valve cover. You may want to purchase 91011033, our billet breather and/or 91011034, our billet PCV valve.
Each chrome push-in style oil breather cap fits factory and after market valve covers with a 1-1/4" diameter hole, with rubber grommet.