Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Billet Style Aluminum Breather With PCV Valve

Specs
Material Type:
Aluminum
Overall Height:
1.50
Sold in Quantity:
Each
Finish:
Polished
Base Diameter:
2.50
Hole Diameter:
1.25
Outlet Fitting:
0.375
Notes
Includes grommet. Use with 3/8" I.D. rubber hose
Billet Style Aluminum Breather With PCV Valve

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Polished aluminum breathers come with rubber grommets for 1.250" hole.

Customer Reviews

Rated 4.8 out of 5 by 6 reviewers.
RATING BREAKDOWN
6 reviews
5 Stars
5
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

MikesBaby
Verified Purchaser
Cedar Rapids, IA, USA
Product Rating

Looks and works great!

March 23, 2014
I purchased this nice breather to replace a cheap one that I bought last year at an auto parts store for $10 bucks. It kept leaking oil onto my valve cover every time I would drive my car! This new aluminum breather is made much better, looks better, and works like it's supposed to. I did have to cut a slit in the bottom of my rubber grommet as it was solid rubber with no hole in it. Other than that minor detail, I'm very happy with the quality of this product!
Pros:
  • made very well.
  • Looks Nice
Cons:
  • None
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

hollywood
georgia
Product Rating

looks good, and fits

January 26, 2013
does exactly what I needed for my closed PCV system
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

CORVETTE STEVE
Verified Purchaser
BOISE ID
Product Rating

LOOKS GREAT ON MY BALL MILLED VALVE COVE

December 26, 2010
LOOK GREAT ON MY BALL MILLED VALVE COVERS AND DOES WHAT IT IS DESIGNED TO DO ........GREAT PRODUCT
Pros:
  • GOOD LOOKING PCV VALVE
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Dave
Verified Purchaser
Tucumcari,N.M.
Product Rating

Nice stuff

March 17, 2012
very clean looking, use them on all my hotrods
Pros:
  • Improves Engine Efficiency
  • Easy To Install
  • Durable
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

TheGear Box
Verified Purchaser
Garedn City Michigan
Product Rating

Beautiful Finish

October 17, 2010
This is a great part. perfect fit.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Bruce with a 61 Willys
Verified Purchaser
St. Louis, Mo.
Product Rating

PVC Billet Breather

September 01, 2011
Looks and works as well!
Pros:
  • Durable
  • Improves Engine Efficiency
  • Easy To Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1
91011034

Product Q&A

3 questions : 4 answers

2 answers

Do I have to drill holes in the grommet? My grommets fit but they are actually plugs without an opening.

Woodrow
Satellite beach Florida
March 23, 2014

Do I have to drill holes in the grommet? My grommets fit but they are actually plugs without an opening.

Answers

March 24, 2014
MikesBaby
I had the same problem. The tech told me to cut a hole in the bottom, which I did. Hopefully, that's all you need to do.
March 24, 2014
EricM
Yes you will need to cut a hole into the grommet in order for air to pass through it.
1 answers

Is it possible to remove the PCV valve? I need a closed breather that I can connect to my air cleaner.

jbam
Laguna Niguel CA
March 09, 2012

Is it possible to remove the PCV valve? I need a closed breather that I can connect to my air cleaner.

Answers

March 14, 2012
John
These breathers have a removable PCV that is retained by a snap ring. It can be cleaned and replaced, left out all together, or the port could be plugged if desired
1 answers

Will these work with Item #: 91017115? Does the grommet come with them? If not what ID grommet do I purchase?

Cannibal
las vegas
October 17, 2011

Will these work with Item #: 91017115? Does the grommet come with them? If not what ID grommet do I purchase?

Answers

October 18, 2011
Jason
Yes, part number 91011034 will work with valve cover #91017115 and grommet is included with breather
Page 1 of 1

You may also be interested in:

Ball Milled Billet Aluminum Oval Air Cleaner, 12 Inch
(Part #91011030)
                        

Theses highly polished aluminum air cleaners have the look of billet without the expense. This 12" Ball-Milled Air Cleaner is cast aluminum, approximately 1/4" thick, polished, and the grooves you see are actually ball-milled. Even the base is 1/4" cast aluminum and polished. Fits carburetors with 5-1/8" air horns.  Measures 12" long x 8-3/8" wide x 3" high.

  • Ball-Milled Air Cleaner
  • Highly polished cast aluminum
  • Fits carburetors with 5-1/8" air horns
  • 1/4" thick
  • 12" long x 8-3/8" wide x 3" high
Weld or Bolt-On Fill Cap
(Part #91011036)
                        

Billet aluminum cap and base. Weld or screw to your valve cover, oil tank or rear end. Knurled cap with O-ring seal.

  • 1-1/4" inside diameter
  • 1-1/4"-12 thread pitch

Note: If using this fill cap in a bolt-on manner, (3) #4 screws/bolts with a countersunk head are required (not included).  Bolt hole size is 1/8".

Finned Valve Cover Breathers
(Part #91017116)
                        Nostalgic finned valve cover breather. Use with grommet 550-6375 to fit a 1-1/4" I.D. hole (typical aftermarket valve cover).
                    
Finned Valve Cover Breathers with PCV
(Part #91017118)
                        

Nostalgic finned valve cover breather with built in PCV insert. Use with grommet 550-6375 to fit inside a 1-1/4" I.D. hole (typical aftermarket valve cover).

Garage Sale - Total Performance Aluminum Valve Cover Breather, PCV
(Part #7153051)
                        

Billet aluminum valve cover breathers from Total Performance. Includes the grommet. 

 

This is garage sale priced because it has been discontinued.

 

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

OTB Gear 6801 Finned Valve Cover Breather, 3 Inch Diameter, 1 Inch Neck
(Part #9106801)
                        

This finned valve cover breather is a classy addition to your engine. Constructed from aircraft grade A356 aluminum, it is polished to meet show quality standards.

  • 3" in diameter with a 1" neck
  • Fits into grommet with 1" hole
  • High quality polished aluminum construction
  • Made in USA

 

Billet Style Aluminum Breathers Without PCV Valve
(Part #91011033)
                        Polished aluminum breathers come with rubber grommets for 1.250" hole.
                    
Billet Valve Cover O-Ring Oil Fill
(Part #91017134)
                        This is a handy little item. Basically, it's a bolt-in breather opening for a valve cover that can be used to install a breather cap, an oil fill cap, or a breather with a PCV valve. 

To install this item, you must make a 1-7/16" hole in the valve cover. You may want to purchase 91011033, our billet breather and/or 91011034, our billet PCV valve.
Push-In Style Oil Breather Caps
(Part #5502068)
                        

Each chrome push-in style oil breather cap fits factory and after market valve covers with a 1-1/4" diameter hole, with rubber grommet.