Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Billet Aluminum Outside Mirror

SAME DAY SHIPPING! Order within the next 1 hour 44 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Sold in Quantity:
Each
Finish:
Natural
Garage Sale:
No
Centerline of Holes:
.38
Overall Height:
1.76
Overall Width:
.50
Overall Length:
4.63
Overall Thickness:
1.60
Arm Length:
4.20
Billet Aluminum Outside Mirror

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Billet aluminum outside mirror with screw on mount. Choose left or right. Made in the U.S.A.

Customer Reviews

Rated 3 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
0
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Fast Fred
Verified Reviewer
Somerset, NJ

91051230 Billet Aluminum Outside Mirror

September 19, 2015
I installed them on my '34 Ford Coupe back in 2004. Only put a thousand miles on my car. Don't drive the car in bad weather and store the car indoors. Right from the get go although the mirrors look great they don't hold still. Every little bump in the road and they go out of whack where you can't see properly. A big problem on the passenger side being you have to stop to adjust it. The other problem I have encountered is that Mirror Glass is deteriorating that I have to buy a new set (not cheap)or bring them to a glass shop to take the bad mirror glass out and replace them both. Going to compare the cost soon.
Pros:
  • Great looking
Cons:
  • Loosensmirror Deteriorate
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 1 answers

1 answers

Does this mirror fit either side right or left. How wide is it at base and how does it bolt on?

CBA
Fort Mohave, AZ
August 11, 2015

Does this mirror fit either side right or left. How wide is it at base and how does it bolt on?

Answers

August 12, 2015
Eric
Expert
This mirror is side specific. Select the side needed in the drop down menu just below the Add to Cart button. The base is 3/4" wide and there are two screws that fasten it to the door skin.
Page 1 of 1

You may also be interested in:

Billet Aluminum Inside Mirror, Screw-On
(Part #91051210)
                        

Our billet aluminum rear view mirror easily mounts to your vehicle with two screws, studs or bolts.

Billet Aluminum Inside Mirror, Glue-On
(Part #91051220)
                        

Our 4" x 1-1/2" billet aluminum rear view mirror mounts onto your windshield with and adhesive pad.

Hagan M-RH4 Fattie 4 Inch Round Rear-View Mirror Head
(Part #174001)
                        

Fatties round mirror heads multiply the view 600%, reduces night glare 80%, absorbs vibration, and eliminates blind spots!  They are show polished CNC machined aluminum and have smooth action pivots.

  • 10-24 Thread
  • Mirror is 4" in diameter
  • Sold Individually
Manufacturer Installation Note: Hagan manually tests every Fatties mirror pivot before the unit is boxed.   The pivot ball is NOT movable with your fingers. It must first be mounted to a mounting arm for proper leverage.  The pivot ball and stud assembly will then be able to be moved for proper mirror placement.  It is purposely built in this manner with this amount of tension on the pivot ball so that the mirror has proper placement and retention.
Hagan M-RH Fattie 3-1/2 Inch Round Rear-View Mirror Head
(Part #174002)
                        

Fatties round mirror heads multiply the view 600%, reduces night glare 80%, absorbs vibration, and eliminates blind spots!  They are show polished CNC machined aluminum and have smooth action pivots.

  • 10-24 Thread
  • Mirror is 3-1/2" in diameter
  • Sold Individually
Manufacturer Installation Note: Hagan manually tests every Fatties mirror pivot before the unit is boxed.   The pivot ball is NOT movable with your fingers. It must first be mounted to a mounting arm for proper leverage.  The pivot ball and stud assembly will then be able to be moved for proper mirror placement.  It is purposely built in this manner with this amount of tension on the pivot ball so that the mirror has proper placement and retention.
Hagan M-OVH Fattie Oval Rear-View Mirror Head
(Part #174003)
                        

Fatties oval mirror heads multiply the view 600%, reduces night glare 80%, absorbs vibration, and eliminates blind spots!  They are show polished CNC machined aluminum and have smooth action pivots.

  • 10-24 Thread
  • Mirror is 4-3/4" x 1-3/4"
  • Sold Individually
Manufacturer Installation Note: Hagan manually tests every Fatties mirror pivot before the unit is boxed.   The pivot ball is NOT movable with your fingers. It must first be mounted to a mounting arm for proper leverage.  The pivot ball and stud assembly will then be able to be moved for proper mirror placement.  It is purposely built in this manner with this amount of tension on the pivot ball so that the mirror has proper placement and retention.
Hagan M-RTH Fattie Rectangular Rear-View Mirror Head
(Part #174004)
                        

Fatties rectangular mirror heads multiply the view 800%, reduces night glare 80%, absorbs vibration, and eliminates blind spots!  They are show polished CNC machined aluminum and have smooth action pivots.

  • 10-24 Thread
  • Mirror is 4-3/4" x 1-3/4"
  • Sold Individually
Manufacturer Installation Note: Hagan manually tests every Fatties mirror pivot before the unit is boxed.   The pivot ball is NOT movable with your fingers. It must first be mounted to a mounting arm for proper leverage.  The pivot ball and stud assembly will then be able to be moved for proper mirror placement.  It is purposely built in this manner with this amount of tension on the pivot ball so that the mirror has proper placement and retention.
Hagan M-ARM-N Fattie Noodle Rear-View Mirror Arms, Pair
(Part #174005)
                        

Finish off your custom street rod right with these exterior rear-view mirror arms from Hagan Street Rods.  They bolt to your vehicle with two 10-24 screws and each arm raises the mirror up 4" and out from body 4".  Comes in a show polished finish.

  • Arms are 5-1/2" 
  • Mount base is 1" x 1/2"
  • Mount holes are 5/8" apart
  • Comes with rubber gasket
  • Sold in pairs
Hagan M-ARM-C Fattie Curved Rear-View Mirror Arms, Pair
(Part #174006)
                        

Finish off your custom street rod right with these exterior rear-view mirror arms from Hagan Street Rods.  They bolt to your vehicle with two 10-24 screws and each arm drops the mirror down 4" and out from body 4".  Comes in a show polished finish.

  • Arms are 5-1/2" 
  • Mount base is 1" x 1/2"
  • Mount holes are 5/8" apart
  • Comes with rubber gasket
  • Sold in pairs
Hagan M-ARM-S Fattie Rear-View Mirror Short Arms, Pair
(Part #174009)
                        

Finish off your custom street rod right with these exterior rear-view mirror arms from Hagan Street Rods.  They bolt to your vehicle with two 10-24 screws and each arm angles up 20 degrees and angles back 10 degrees.  Comes in a show polished finish.

  • Arms are 3-1/2" long
  • Mount base is 1" x 1/2"
  • Mount holes are 5/8" apart
  • Comes with rubber gasket
  • Sold in pairs
Hagan M-ARM-L Fattie Rear-View Mirror Long Arms, Pair
(Part #174010)
                        

Finish off your custom street rod right with these exterior rear-view mirror arms from Hagan Street Rods.  They bolt to your vehicle with two 10-24 screws and each arm angles up 20 degrees and angles back 10 degrees.  Comes in a show polished finish.

  • Arms are 5-1/2" long
  • Mount base is 1" x 1/2"
  • Mount holes are 5/8" apart
  • Comes with rubber gasket
  • Sold in pairs
Hagan M-ARM-W Fattie Rear-View Mirror Wing Arms, Pair
(Part #174011)
                        

Finish off your custom street rod right with these exterior rear-view mirror arms from Hagan Street Rods.  They bolt to your vehicle with two 10-24 screws and each arm angles up 20 degrees and angles back 35 degrees.  Comes in a show polished finish.

  • Arms are 6-1/4" long and protrude 5" from the vehicle
  • Mount base is 2-3/4" x 1/2"
  • Mount holes are 1-5/8" apart
  • Comes with rubber gasket
  • Sold in pairs