Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Big Block Chevy Oil Pump

SAME DAY SHIPPING! Most orders ship within 24 hours.

Big Block Chevy Oil Pump
Big Block Chevy Oil Pump

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

High volume B/B Chevy oil pump. 22% more volume than stock. 5 bolt cover.  Requires a 3/4" Pickup.

NOTE:   If using this pump on a SBC motor, additional modifications may need to be made to the oil pan for clearance.

You may also be interested in:

1965-1992 Big Block Chevy Chrome Oil Pans
(Part #91017709)
                        

Chrome Steel Oil Pans for 1965-1992 Big Block Chevys with dipstick on the passenger side.

  • For 1965-1992 Big Block Chevys with dipstick on the passenger side
  • This pan is 8" deep at the sump
  • The sump extends about 9-12 forward from the back of the pan
  • Dipstick tube is in the pan and is on the RH / passenger side

NOTE: LH is the driver's side and RH is the passenger's side.

 

Moroso 20431 Big Block Chevy Conversion Oil Pan
(Part #54520431)
                        

If you have ever tried to put a B/B chevy in a Tri-Five Chevy or Chevy II, you know there just isn't much room. This pan was designed to make the job a little easier. This pan has a 7 quart capacity (w/o filter) and accepts up to a 4-1/4" stroke with steel rods.

  • Pick-up 54524430 is required for installation
  • Notched rear sump clears steering linkage
  • Accepts strokes up to 4.250" with steel rods, 4.090" with aluminum rods
  • Compatible with most starter/flywheel combinations
  • 1/4" NPT Thread for dipstick assembly, suggested dipstick # 545-25971

Fits Mark IV style 396-454 (except Gen V and Gen VI) Big Block Chevy V-8s. For 1962-67 Chevy II (without power steering) and 1955-57 Chevys. Transmission MUST be in stock position.

Please see below for suggested oil pump pick-up.

Instructions (PDF)

Moroso 24440 Oil Pump Pickup, Big Block Chevy
(Part #54524440)
                        

Moroso Big Block Chevy extended oil pump pickups are engineered to be "where the oil is" under the most demanding racing conditions. Designed for use with Moroso oil pans, these steel pickups are precision-bent and welded. A wire mesh steel screen, which is welded to the pickup box, traps debris without restricting oil flow.

  • Press-fit
  • Features bolt-on support bracket 
  • Aftermarket pan style
  • Sold Individually

Fits: Stock Oil Pumps, Moroso BBC Race Pump Nos. 22150, 22160, 22162 or M77/M77HV style pump

Big Block Chevy Oil Pump Shaft
(Part #54522080)
                        Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve.
                    
Moroso 22090 Small Block Chevy Oil Pump Shaft for Big Block Oil Pump
(Part #54522090)
                        Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve.
                    
ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
(Part #101RPS1)
                        For S/B Chevy only. Heat treated Chromoly steel. Comes with grade 8 nut and heat treated washer.