The Vortex GT is certified to the Snell SAH2010 standard which requires the helmet to be tested to the Snell SA2010 standard plus additional testing for use with Head and Neck Restraint Device systems. Bell is the first company in the industry to certify helmets to the Snell SAH2010 standard. Bell's M6 terminal hardware is incorporated into the helmet and accepts Head and Neck Restraint anchor system hardware. (We recommend consulting with the Head and Neck Restraint manufacturer to select an anchor system that allows the user to index the hardware in the proper location for use with the device.) The Snell SAH2010 standard is compatible with FIA8858-2010 and is recognized by the FIA for use outside of North America.
The Vortex GT takes a 276 SRV Shield and each helmet comes with a clear shield and Bell visor strip as standard equipment. The Vortex GT also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can also customize the fit of the Vortex GT by using Bell's Cheek Pad Inserts in 5mm, 10mm, 15mm and 20mm sizes to tighten the fit in the cheek area. In addition, replacement face piece kits are available for the Vortex GT in the event the front interior chin piece needs to be replaced. The helmet is available in White and Rubberized Mate Black finish - the rubberized surface is more resistant to finger prints and smudges than traditional flat finishes.