Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Bearing-Seal Kit for Two Mustang II Brake Rotors

Specs
Sold in Quantity:
Set
Large Bearing I.D.:
1.38
Small Bearing I.D.:
.86
Garage Sale:
No
Notes
Includes (2) inner wheel bearings, (2) outer wheel bearings, and (2) inner grease seals. Enough for two brake rotors. No races or cups included.
Bearing-Seal Kit for Two Mustang II Brake RotorsBearing-Seal Kit for Two Mustang II Brake Rotors
Bearing-Seal Kit for Two Mustang II Brake Rotors

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

This bearing and seal kit includes two inner wheel bearings, two outer wheel bearings and two inner grease seals. This kit is enough for two brake rotors and is intended to be used with a new rotor installation as this kit does not include the bearing races or cups.

If your project willl be making use of used rotors, you will require new bearing races or cups.  Therefore you will need to purchase the bearing and seal kit # 910-31052 suggested below in place of kit # 910-31000.

Works with Mustang II/Pinto and Granada rotors using Mustang II/Pinto spindles only. It will not work for installing Mustang II/Pinto brake rotors on 1949-1954 Chevy spindles. Not for use with early Chevy spindle brake conversion kits.

-Large Bearing-
Thickness: .656"
Upper OD: 1.900"
Lower OD: 2.150"
Bearing ID: 1.375"

-Small Bearing-
Thickness: .651"
Upper OD: 1.380"
Lower OD: 1.570"
Bearing ID: 0.864"

Never install new hubs with old bearings.

Item Details

For Mustang II/Pinto and Granada rotors using Mustang II spindles.

You may also be interested in:

Bearing & Seal Kit - GM 11 Inch Brakes to Mustang II
SKU-91031051
                        Bearing & seal kit for GM 11" Rotors (4.75" bolt pattern)/Mustang II spindle brake kit part 910-31943.  

Kit Includes:

  • Seals
  • Tapered inner bearing cones
  • Tapered inner bearing cups
  • Tapered outer bearing cones
  • Tapered outer bearing cups
Bearing & Seal Kit - 11 Inch Brakes to Mustang II Spindle
SKU-91031052
                        Bearing & seal kit for GM 11" rotor/Mustang II spindle brake kit (910-31944)

Kit Includes:

  • Seals
  • Tapered inner bearing cones
  • Tapered inner bearing cups
  • Tapered outer bearing cones
  • Tapered outer bearing cups
Mustang II Disc Brake Rotor, 5 on 4-1/2 Inch
SKU-91031001
                        

Vented stock 9-1/4" diameter brake rotors for 1974-1980 Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using '49-'54 Chevy spindles). Brake rotors are new, not plugged or re-drilled. Has a 5 on 4-1/2" bolt pattern with corresponding 1/2" diameter fine thread wheel studs.

  • Outside Diameter of rotor disc - 9.256"
  • Thickness of vented disc - .884"
  • I.D. of back side of rotor - 6.256"
  • Rear rotor face to bearing hub - .290"
  • Outer hub diameter where wheel will mount - 5.834"
  • Outer hub height - 1.450"
  • Bearing snout is 1.60" tall, 2.55" diameter at bottom and 2.384" at outer
    end.

Be sure to install new bearings and seals (910-31000) with your new disc brake rotors.

Mustang II Disc Brake Rotor, 5 on 4-3/4 Inch
SKU-91031002
                        

Vented stock 9-1/4" diameter brake rotors for 1974-1980 Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using '49-'54 Chevy spindles). Brake rotors are new, not plugged or re-drilled. Has a 5 on 4-3/4" bolt pattern with corresponding 7/16" diameter fine thread wheel studs.

  • Outside Diameter of rotor disc - 9.256"
  • Thickness of vented disc - .884"
  • I.D. of back side of rotor - 6.256"
  • Rear rotor face to bearing hub - .290"
  • Outer hub diameter where wheel will mount - 5.834"
  • Outer hub height - 1.450"
  • Bearing snout is 1.60" tall, 2.55" diameter at bottom and 2.384" at outer
    end.


Be sure to install new bearings and seals (910-31000) with your new disc brake rotors.