Products to Compare (max of 3)
X
Compare These Parts
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Help Center
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
Shop By
Support
Account

Bassett 58SP5 15X8 D-Hole Lite 4 on 4.25 5 Inch Backspace Black Wheel

Specs
Material Type:
Steel
Bolt Pattern:
4 on 4.25"
Color:
Black
Wheel Backspace:
5"
Finish:
Painted Black
Wheel Center Finish:
Painted
Wheel Rim Finish:
Painted
MFG. Part #:
58SP5
Beadlock:
No
Width:
8
Diameter:
15
Weight:
19
Bassett 58SP5 15X8 D-Hole Lite 4 on 4.25 5 Inch Backspace Black Wheel

Click image to enlarge

Please note the following about this product:

  • Ground Shipping Only - Can't Ship Air.

Details

Reviews (0)

Q & A (1)

What's in the Box

Info

The classic Bassett Racing Wheel D-Hole center design is combined with the 15" diameter lightweight spun form rim shells and available in a variety of widths from 7" to 14" wide. Bassett produces the strongest, lightest and truest steel wheel shells on the market using its three in-house CNC metal spinning lathes. Lightweight and low runout (under .030") thanks to spun-form wheel shells produced in-houseReinforced torque ring and forged coining on center increases durabilityThe 5/8" valve stem hole is located behind the center to avoid clippingLarger D-holes are designed to facilitate handling and lower pit stop times NOTE: For easier tire mounting, these wheels do not have a tire safety bead. For dirt applications, make sure you select a wheel with a safety bead at the time of order.

Notes

The following must be considered when using Bassett wheels for on highway / street use applications when the wheel/tire assembly is being balanced. Bassett Wheels are lug centric, which means they are built off of and must be balanced using the bolt circle and NOT the wheel center hole. Improper use of a tire balancer that centers the wheel on the hub bore, not the bolt circle will result in an incorrect reading for rim runout, as the center hole is not in the perfect center of the bolt pattern. The only machine capable of performing a lug centric balance is the Hunter GSP 9700 with the flange plate bolt circle adapter and no centering cone.

Customer Reviews

This product has no reviews.

Product Q&A

1 questions : 1 answers

1 answers

My car uses 14mm x 1.5mm pitch studs and nuts. I can't seem to find any proper 45 degree lug nuts that are made in 14x1.5mm size also I don't see the size of the actual stud hole listed for these wheels and am wondering if a 14 mm stud will fit thru the holes in the wheels. any help you can offer ?

olddog
Boyertown PA
July 20, 2015

My car uses 14mm x 1.5mm pitch studs and nuts. I can't seem to find any proper 45 degree lug nuts that are made in 14x1.5mm size also I don't see the size of the actual stud hole listed for these wheels and am wondering if a 14 mm stud will fit thru the holes in the wheels. any help you can offer ?

Answers

July 20, 2015
Eric
Expert
These wheels will accept up to a 5/8" wheel stud. Your 14mm studs will be just fine. Sorry we do not offer 14mm-1.5 lug nuts. You may have to have some custom made with a 1" hex size. Keep in mind that these wheels require a 90 degree taper lug nut.
Page 1 of 1
Suggestions