ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Posies Super Slide Springs 1064 Quarter Elliptical Spring Axle Mount

SAME DAY SHIPPING! Order within the next 14 hours 15 minutes and receive same day shipping

Specs
Material Type:
Steel
Overall Width:
1.76
Overall Length:
3.15
Sold in Quantity:
Pair
Finish:
Natural
Inside Diameter:
.76
MFG. Part #:
1064
Notes
Sleeve acts as support spacer on I-Beam applications.
Posies Super Slide Springs 1064 Quarter Elliptical Spring Axle Mount

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Posies pivoting spring perches for mounting your axle to your quarter elliptic springs. Designed for use with 1-3/4" wide springs. Works with 3/4" O.D. bushings.

  • 2.0070 for the threaded length
  • 1.5650 for the length of the sleeve
  • .7560 sleeve i.d. 
  • Threads are 3/4-16
  • Shackle mounting bushing length is 1.7500 with a I.D. of .760

Includes (2) perches.

See the Ellipta-Slide article in Street Rodder Magazine (Link)

Specs


Customer Reviews

This product has no reviews.

Product Q&A

3 questions : 3 answers

1 answers

can it be used throught wishbones ? i would like to use it with a posie spring on my '27 front end axle, behind the I-beam , the sleeve welded throught the wishbones like spring pivot on bracket...(but maybe a bit too shorter for the bones) Is it possible ? enought strong ? no problem for welding ? ... Sorry for my bad english :) Thanx

alex
FRANCE
May 03, 2013

can it be used throught wishbones ? i would like to use it with a posie spring on my '27 front end axle, behind the I-beam , the sleeve welded throught the wishbones like spring pivot on bracket...(but maybe a bit too shorter for the bones) Is it possible ? enought strong ? no problem for welding ? ... Sorry for my bad english :) Thanx

Answers

May 03, 2013
Jason
Axle mounts number 5801064 could be used in a spring behind cross leaf application by welding the sleeves thru the wishbones. Care should be taken to weld in at the correct angle so the shackles will be perpendicular to the pivot so they will not bind during suspension travel and shorten the shackle bushing lifespan.
1 answers

What is the length of the threaded stud and sleeve? Also is the sleeve threaded inside or does it just slip onto the stud?

Sneaky Pete
Addison, IL
April 11, 2011

What is the length of the threaded stud and sleeve? Also is the sleeve threaded inside or does it just slip onto the stud?

Answers

April 13, 2011
Tom
2.0070 for the threaded length, 1.5650 for the length of the sleeve. .7560 sleeve i.d., threads are 3/4-16, shackle mounting bushing length is 1.7500 with a I.D. of .7550.
1 answers

what is the thred or shank dia. of the stud portion of this part?

Big Al
February 08, 2011

what is the thred or shank dia. of the stud portion of this part?

Answers

February 10, 2011
Waymon
The thread or shank diameter of the stud portion of the, SPRING AXLE MOUNT ONLY, Item #: 5801064 is 3/4 inch.
Page 1 of 1

You may also be interested in:

Nylon Shackle Kits, 1-3/4 Inch Wide Spring
(Part #91033323)
                        

Fits front or rear springs. All measurements are width of spring. All nylon bushed shackles are 1-1/2" shackle bolt center to shackle bolt center.

Bushings are included. Bushing O.D. is 3/4".

 

Leaf Spring Measuring Guide (Link)

Super Glide Quarter Elliptical Springs
(Part #91033125)
                        

Super Glide™ quarter elliptic springs feature a five leaf, 1-3/4" wide spring design. The ends of the spring leaves of a Super Glide™ spring have a unique nylon insert. This insert works as a dry lubricant, significantly reducing leaf-to-leaf friction. This reduction of friction lets the spring move more easily, thereby giving a smoother, quieter ride.

  • 1-3/4" wide
  • 18" eye-eye
  • Sold each, two required
Posies Super Slide Springs Q2K Quarter Elliptical Spring Kit
(Part #5801000)
                        

Posies Ellipta-Slide quarter elliptical spring kit looks great on either a hi-tech or traditional street rod, and can be used in either front or rear suspensions. Ellipta-Slide springs feature rolled & tapered leaves with built-in Super Slide moly-nylon buttons for a great ride for the street.

  • 1-3/4" wide
  • 17-3/4" overall length
  • 15-5/8" eye to spring end

Kit includes springs, frame mounts with adjustable ride height, frame gussets, shackles, and stainless spring clamps. Mounting perches 580-1064 sold separately.

See the Ellipta-Slide article in Street Rodder Magazine (Link)

Item Details

Note: This is the Q2K kit for "Heavy Applications"
Bronze Replacement Shackle Bushings for 1-3/4 Inch Shackle
(Part #91033327)
                        These bronze replacement shackle bushing sets  consist of (8) bushings which will fit 1 pair of shackles. Bushings are  for a 3/4" spring eye or perch and accept shackles having 1/2" shaft or  bolt. 

Fits Speedway shackles:

    91033323-CHR
    91033323-SS
    91033323-ZINC