Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®


Auto Meter 2242 Oil Pressure Sending Unit

Material Type:
Sold in Quantity:
Thread Pitch:
1/8" NPT and 1/4" NPT adapter.
MFG. Part #:
Garage Sale:
Gauge Range:
100 PSI
Sensor, Oil Pressure, 0-100psi, 1/8" NPT Male, for Short Sweep Elec.
Auto Meter 2242 Oil Pressure Sending Unit

Click image to enlarge



Q & A

What's in the Box

Auto Meter sending unit for 100 psi oil pressure gauge.  For use with Short Sweep Electric Oil Pressure Gauges. 1/8" NPT Male Thread. Includes 1/4" NPT Adapter fitting.

You may also be interested in:

Classic Instruments SN35 Fuel Level Sender, 240/33 Ohm, 6-24 Inch
(Part #275235)

This sender is for fuel gauges from Classic Instruments, Stewart Warner, Autometer, and Sun. 240 Ohms empty, 33 Ohms full. It will work in tanks from 6" to 24" deep and it has a right-hand and a left-hand swing functionality.

LH/RH Swing Guide (Link)

Ohms Chart (Link)

Replacement Senders for Oil, Water, Fuel
(Part #60451)

These brass senders are intended to replace bad or used old senders with ease.  They'll give you peace of mind, knowing your gauges are reading accurately.  Choose from oil pressure, oil temperature, water temperature, and fuel pressure.

Sender Types:

  • 20 - 20 psi oil pressure 1/8" npt
  • 230 - 230* water temp 1/2" npt
  • 270 - 270* oil temp 1/2" npt
  • Oil Pressure- Rated at 30 psi plus/minus 10 psi
  • Fuel Pressure-  Rated at 3 psi plus/minus 2 psi, 1/8" NPT threads


Stewart Warner 280EE-F Electric Oil Temperature Gauge Sender
(Part #665280EE)

Stewart Warner individual gauges do not come with sending units. Operates one gauge only.

1/8" NPTF. Includes adapter for 1/4", 3/8" and 1/2" pipe thread.