Aluminum RH Female Heim, 3/16 Inch

							                        

                                                        
Aluminum rod ends are a close tolerance, 3-piece, medium duty design.  Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball, Kevlar race. Self lubricating Teflon liner seals out dirt and debris.
Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.

Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
Aluminum Rod Ends Chart (GIF)
                                                    

						                        

							                        

                                                        Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  
Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.
  
ASSEMBLY TIP:
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads. 
Standard Heim Sizes Chart (GIF)
                                                    

						                        

							                        

                                                        
Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit.
Defies contact of dissimilar or like metals
Not affected by heat, moisture, salt water, or corrosion
Learn why using anti-seize is so important in our tech article, Installing New Hardware.
                                                    

						                        

							                        

                                                        
These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.
Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads. 
                                                    

						                        

							                        

                                                        
Standard rod ends are for general purpose applications and are a 2-piece  design with a low carbon steel body and a hardened steel ball without a race  (metal to metal contact).
 Applications: Clutch, brake, steering linkage, &  suspension components on moderate horsepower applications. 
 Assembly Tip: To ease assembly, be sure to run a tap or die  through the threads on chrome plated fasteners and apply an anti-seize compound  to prevent galling of the threads.
                                                    

						                        

							                        

                                                        Aluminum female 5/16"-24 heim and 5/16" jam nut for completeing your Mini Sprint or other small vehicle brake system.
                                                    
						                        

							                        

                                                        
Aluminum rod ends have close tolerance, 3 piece, medium duty rod end.  Hard anodized 7075-T6 aerospace quality aluminum body.  Heat treated, 5210 precision ground ball, Kevlar race.  Self lubricating Teflon liner to seal out dirt an debris.
Applications: Designed for motorsports application where weight is critical.  All of the strength & features of the precision rod ends at half of the weight.

ASSEMBLY TIP:  To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads. 

                                                    

						                        

							                        

                                                        
Aluminum rod ends have close tolerance, 3 piece, medium duty rod end.  Hard anodized 7075-T6 aerospace quality aluminum body.  Heat treated, 5210 precision ground ball, Kevlar race.  Self lubricating Teflon liner to seal out dirt an debris.
Applications: Designed for motorsports application where weight is critical.  All of the strength & features of the precision rod ends at half of the weight.

ASSEMBLY TIP:  To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.