ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Aluminum Heim Joint Rod Ends, 3/16 Inch (10-32) RH Male

SAME DAY SHIPPING! Order within the next 7 hours 31 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Color:
Clear
Finish:
Anodized
Hole Diameter:
0.1875
Thread Pitch:
10-32
Threads:
RH Male
Aluminum Heim Joint Rod Ends, 3/16 Inch (10-32) RH Male

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Aluminum rod ends are a close tolerance, 3-piece, medium duty design. Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball, Kevlar race. Self lubricating Teflon liner seals out dirt and debris.

Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.

Assembly Tip:
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Aluminum Rod Ends Chart (GIF)

Customer Reviews

Rated 4 out of 5 by 2 reviewers.
RATING BREAKDOWN
2 reviews
5 Stars
1
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

hank5276
San Jose, CA, USA

Aluminum Heim Joint Rod Ends

September 06, 2014
Good quality very nice. Threads were very good. Nuts fit great
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

noowife
Verified Purchaser
Lansing,MI

No jam nut

September 30, 2011
No jam nut
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Standard Steel Heim Joint Rod Ends, 3/16 Inch (10-32) RH Male
(Part #1750100)
                        

These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/16 Inch
(Part #1750110)
                        Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

ASSEMBLY TIP:
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Standard Heim Sizes Chart (GIF)

Aluminum RH Female Heim Joint Rod Ends, 3/16 Inch
(Part #1170700)
                        

Aluminum rod ends have close tolerance, 3 piece, medium duty rod end.  Hard anodized 7075-T6 aerospace quality aluminum body.  Heat treated, 5210 precision ground ball, Kevlar race.  Self lubricating Teflon liner to seal out dirt an debris.

Applications: Designed for motorsports application where weight is critical.  All of the strength & features of the precision rod ends at half of the weight.

ASSEMBLY TIP:
  To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Speedway Steel 3/16 Inch RH Male Throttle Linkage Rod Ends with Stud
(Part #1750120)
                        

These 3/16" rod ends can be used to create a trick throttle linkage system when combined with our swedged aluminum tubing.

Use with swedged aluminum throttle tube.

Item Details

3/16" stud/thread
Aluminum Jam Nuts, 10-32 RH, Pack/6
(Part #3159592)
                        

These jam nuts are made of 7075 aluminum alloy and are clear anodized for corrosion resistance. Fine thread for use with rod ends, heim joints, and clevis.

Sold in package of six.

Item Details

3/8" hex
Aluminum Heim Joint Rod Ends, 3/16 Inch (10-32) LH Male
(Part #1170802)
                        

Aluminum rod ends are a close tolerance, 3-piece, medium duty design. Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball, Kevlar race. Self lubricating Teflon liner seals out dirt and debris.

Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.

Assembly Tip:
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Aluminum Rod Ends Chart (GIF)