Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Aluminum Fuel Line, 5/8 Inch O.D.

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Material Type:
Aluminum
Sold in Quantity:
Each
Finish:
Natural
Garage Sale:
No
Overall Length:
30.00
Inside Diameter:
.55
Outside Diameter:
.64
Aluminum Fuel Line, 5/8 Inch O.D.

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money.
  • Use with tube nut couplers, sleeves and 37° flared AN fittings
  • Rated to 250 psi
  • Not recommended for high pressure (brake) applications
  • Available in 10 ft., 20 ft., or 30 ft. coils

Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Notes

The main issue when dealing with aluminum tubing (or any aluminum for that matter) is that it “work hardens” when it flexes, which can lead to cracks. It is important that the hard line is isolated from vibration and movement.

Clamp the tubing securely with rubber coated clamps (Adel clamps) and use bulkhead fittings where the tubing attaches to the flex line. Never run the tubing directly to the engine without a flexible hose section. If installed properly, aluminum tubing is safe and durable.

Customer Reviews

Rated 5 out of 5 by 3 reviewers.
RATING BREAKDOWN
3 reviews
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Boosted C10
Verified Purchaser
Verified Reviewer
Detroit, MI

Best price around and good product!

June 07, 2015
Great product with a great price. I searched all over for aluminum line rated for my needs. This did the trick for great price!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Hemi John
Verified Purchaser
Lake Wales, FL

Worked great and would buy it again.

April 13, 2011
Used it to run engine wires behind my engine on my street rod. Easier to clean than plastic loom and less obvious when painted engine color. Drilled holes and ran polished 1/4 inch aluminum fuel line with wires on top of engine. Easy to bend and drill.
Pros:
  • Easy to work with
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Hemi John
Verified Purchaser
Lake Wales, FL

Worked great and would buy it again.

April 13, 2011
Used it to run engine wires behind my engine on my street rod. Easier to clean than plastic loom and less obvious when painted engine color. Drilled holes and ran polished 1/4 inch aluminum fuel line with wires on top of engine. Easy to bend and drill.
Pros:
  • Easy to work with
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Aluminum Tube Nut Sleeve, -10 AN 5/8 Inch
(Part #6176067)
                        

These tube nut sleeves, when used in conjunction with our tube nuts (sold seperately), allow you to attach hard lines to AN fittings. You need to flare the tube to 37° to match the AN fitting. Not for use with 45° flared lines.

Fitting Thread Application Chart (GIF)

Aluminum Tube Nut Coupler, AN10 5/8 Inch
(Part #6176059)
                        

Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.

Fitting Thread Application Chart (GIF)

Aluminum Fuel Line, 1/4 Inch O.D.
(Part #91011429)
                        Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
  • Use with tube nut couplers, sleeves and 37° flared AN fittings
  • Rated to 250 psi
  • Not recommended for high pressure (brake) applications
  • Available in 10 ft. or 20 ft. coils

Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Aluminum Fuel Line, 3/8 Inch O.D.
(Part #91011430)
                        Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
  • Use with tube nut couplers, sleeves and 37° flared AN fittings
  • Rated to 250 psi
  • Not recommended for high pressure (brake) applications
  • Available in 10 ft., 20 ft., or 30 ft. coils

Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Aluminum Fuel Line, 1/2 Inch O.D.
(Part #91011440)
                        Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
  • Use with tube nut couplers, sleeves and 37° flared AN fittings
  • Rated to 250 psi
  • Not recommended for high pressure (brake) applications
  • Available in 10 ft., 20 ft., or 30 ft. coils

Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Aluminum Black Tube Nut Coupler, -10 AN, 5/8 Inch
(Part #61760591)
                        
Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.

Fitting Thread Application Chart (GIF)

Aluminum Black Tube Nut Sleeve, -10 AN, 5/8 Inch
(Part #61760671)
                        
These tube nut sleeves, when used in conjunction with our tube nuts, allow you to attach hard lines to AN fittings. You need to flare the tube to 37° to match the AN fitting. Not for use with 45° flared lines.

Fitting Thread Application Chart (GIF)

Earls 165010ERL -10 AN Male to 5/8 Inch Tubing Adapter
(Part #425165010ERL)
                        
  • Red & Blue Anodized Aluminum
  • Made in the USA
  • Available for Any Plumbing Situation And Many Custom Applications.
Earls 165110ERL -10 AN Female to 5/8 Inch Tubing Adapter
(Part #425165110ERL)
                        
  • Red & Blue Anodized Aluminum
  • Made in the USA
  • Available for Any Plumbing Situation And Many Custom Applications.
Earls AT165010ERL Ano-Tuff -10 AN Male to 5/8 Inch Tubing Adapter
(Part #425AT165010ERL)
                        
  • Hard Anodized Aluminum Coating Penetrates Aluminum For Wear and Corrosion Resistance
  • Made in the USA
  • Available for Any Plumbing Situation And Many Custom Applications
  • Provides An Aggressive Look
  • Last Twice As Long As Traditional Anodized Fitting
Earls AT165110ERL Ano-Tuff -10 AN Female to 5/8 Inch Tubing Adapter
(Part #425AT165110ERL)
                        
  • Hard Anodized Aluminum Coating Penetrates Aluminum For Wear and Corrosion Resistance
  • Made in the USA
  • Available for Any Plumbing Situation And Many Custom Applications
  • Provides An Aggressive Look
  • Last Twice As Long As Traditional Anodized Fitting
Deluxe Flaring Tool, 37 Degree AN
(Part #91089528)
                        

This is the tool you need to make the 37° flares required for AN fittings. Standard brake and fuel lines are flared at 45° which are not compatible with AN hardware. This tool forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer. Plus, its also self gauging - just insert tube flush with top of die for accurate flare size.

  • Hardened steel, chrome-finished cone makes exceptionally smooth, high-strength flares with a radius at base of
    flare – instead of the sharp angle formed by ordinary tools
  • Slip-on yoke permits use in tight quarters
  • Allows flaring where there is little space between nut and tube end
  • Feed screw design provides smooth, easier operation
  • Positive gripping and self-gauging of tube for exact flare size
  • Sliding die blocks lock in place by clamp action

Works on 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8" OD tubing such as aluminum, copper, brass and mild steel.

910-89528 Instructions (PDF)

Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings

Item Details

Made in the U.S.A.