ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
x
Help Center

sales@speedwaymotors.com

Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Aluminum Fuel Line, 1/2 Inch O.D.

SAME DAY SHIPPING! Order within the next 17 hours 43 minutes and receive same day shipping

Notes
.035" wall thickness.
Aluminum Fuel Line, 1/2 Inch O.D.

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money.
  • Use with tube nut couplers, sleeves and 37° flared AN fittings
  • Rated to 250 psi
  • Not recommended for high pressure (brake) applications
  • Available in 10 ft., 20 ft., or 30 ft. coils

Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Notes

The main issue when dealing with aluminum tubing (or any aluminum for that matter) is that it “work hardens” when it flexes, which can lead to cracks. It is important that the hard line is isolated from vibration and movement.

Clamp the tubing securely with rubber coated clamps (Adel clamps) and use bulkhead fittings where the tubing attaches to the flex line. Never run the tubing directly to the engine without a flexible hose section. If installed properly, aluminum tubing is safe and durable.

Customer Reviews

Rated 4.8 out of 5 by 4 reviewers.
RATING BREAKDOWN
4 reviews
5 Stars
3
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Luckey
Verified Purchaser
Cincinnati Ohio

easy to install, works well

September 08, 2011
The fuel line is easy tp work with.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Chuck
Lincoln, NE

Good Stuff

April 24, 2011
I used this fuel line as a conduit to run the wires to my accessory lights on the roof of my vehicle. It worked great!
Pros:
  • HOLDS SHAPE
  • Perfect wall thickness
  • Can Polish or Paint It
  • Easy to bend
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

dave
lawton ok

great fule line

August 27, 2010
great product. i just ran this fuel line in myh car, and have nothing bad to say about it at all. bent easy made for a nice smooth good looking line
Pros:
  • Great Value
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

62sideways
detroit mi

Great to use and work with

January 23, 2010
Easy to work with and looks great
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

2 questions : 2 answers

1 answers

What fittings are nessecary in order to attatch the fuel line to the gas tank and the fuel pump?

RyanWoods
Denver, CO, USA
March 24, 2013

What fittings are nessecary in order to attatch the fuel line to the gas tank and the fuel pump?

Answers

March 25, 2013
Jason
Speedway offers fitting part numbers 61763920 and 61863921 in AN6 or 61763922 and 61763923 in AN8. You can also flare this line to use with tube nuts and sleeves part #6176058 and 6176066
1 answers

What is the inside diameter?

Dimmitt
Lincoln, NE, USA
October 25, 2012

What is the inside diameter?

Answers

October 26, 2012
Jason
The id is .420"
Page 1 of 1

You may also be interested in:

Aluminum Tube Nut Sleeve, -8 AN 1/2 Inch
(Part #6176066)
                        

These tube nut sleeves, when used in conjunction with our tube nuts (sold seperately), allow you to attach hard lines to AN fittings. You need to flare the tube to 37° to match the AN fitting. Not for use with 45° flared lines.

Fitting Thread Application Chart (GIF)

Aluminum Tube Nut Coupler, AN8 1/2 Inch
(Part #6176058)
                        

Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.

Fitting Thread Application Chart (GIF)

Aluminum Fuel Line, 1/4 Inch O.D.
(Part #91011429)
                        Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
  • Use with tube nut couplers, sleeves and 37° flared AN fittings
  • Rated to 250 psi
  • Not recommended for high pressure (brake) applications
  • Available in 10 ft. or 20 ft. coils

Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Aluminum Fuel Line, 3/8 Inch O.D.
(Part #91011430)
                        Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
  • Use with tube nut couplers, sleeves and 37° flared AN fittings
  • Rated to 250 psi
  • Not recommended for high pressure (brake) applications
  • Available in 10 ft., 20 ft., or 30 ft. coils

Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Aluminum Fuel Line, 5/8 Inch O.D.
(Part #91011441)
                        Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
  • Use with tube nut couplers, sleeves and 37° flared AN fittings
  • Rated to 250 psi
  • Not recommended for high pressure (brake) applications
  • Available in 10 ft., 20 ft., or 30 ft. coils

Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Aluminum Tube Nut Couplers, -8 AN, 1/2 Inch, 2/Pack
(Part #61760581)
                        
Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.

Fitting Thread Application Chart (GIF)

Aluminum Black Tube Nut Sleeves, -8 AN, 1/2 Inch, 2/Pack
(Part #61760661)
                        
These tube nut sleeves, when used in conjunction with our tube nuts, allow you to attach hard lines to AN fittings. You need to flare the tube to 37° to match the AN fitting. Not for use with 45° flared lines.

Fitting Thread Application Chart (GIF)

Russell Performance 639220 1/2 Inch Tubing to -8 AN Flare Adapter
(Part #61763922)
                        

Tubing to AN female flare adapters are for use with aluminum tubing only (not steel tubing). 

  • Connects 1/2" aluminum tube to -8 AN female adapters
  • Unique crimp design eliminates tube flaring
  • Not for use with fuel injection

Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Russell Performance 639230 1/2 Inch Tubing to -8 AN Male Flare Adapter
(Part #61763923)
                        

Tubing to AN flare adapters are for use with aluminum tubing only (not steel tubing). 

  • Connects 1/2" aluminum tube to -8 AN adapters
  • Unique crimp design eliminates tube flaring
  • Not for use with fuel injection

Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Deluxe Flaring Tool, 37 Degree AN
(Part #91089528)
                        

This is the tool you need to make the 37° flares required for AN fittings. Standard brake and fuel lines are flared at 45° which are not compatible with AN hardware. This tool forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer. Plus, it's also self gauging - just insert tube flush with top of die for accurate flare size.

  • Hardened steel, chrome-finished cone makes exceptionally smooth, high-strength flares with a radius at base of
    flare – instead of the sharp angle formed by ordinary tools
  • Slip-on yoke permits use in tight quarters
  • Allows flaring where there is little space between nut and tube end
  • Feed screw design provides smooth, easier operation
  • Positive gripping and self-gauging of tube for exact flare size
  • Sliding die blocks lock in place by clamp action

Works on 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8" OD tubing such as aluminum, copper, brass and mild steel.

910-89528 Instructions (PDF)

Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings