Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Aluminized Heat and Sound Insulation Shield, 4 x 6 Foot Sheets

SAME DAY SHIPPING! Order within the next 1 hour 23 minutes and receive same day shipping

Specs
Overall Width:
6.00
Overall Length:
4.00
Sold in Quantity:
Each
Material Thickness:
.38
Garage Sale:
No
Notes
Aluminum backed on only one side.
Aluminized Heat and Sound Insulation Shield, 4 x 6 Foot Sheets
Aluminized Heat and Sound Insulation Shield, 4 x 6 Foot Sheets

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These aluminized heat shields are constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening. Includes 4 feet by 6 feet of thermal and noise insulation.

  • Insulates against heat, noise and cold 
  • Mold and mildew proof
  • Fire retardent
  • Reflects 97% of infrared energy
  • Fiberglass reinforced
  • Single-sided aluminum backing
  • 4' x 6' sheet

Application

  • Under carpet
  • Under side of hoods
  • Behind firewalls
  • Under headliners
  • Inside doors

You may also be interested in:

Aluminized Heat Barrier, 40 x 36 Inch
(Part #70414001)
                        

Protect your equipment from radiant heat. Often used to create curtains and screens, this sheeting has an aluminum foil backing that reflects heat and withstands temperatures up to 300° F. The fiberglass fabric base is off-white and has a maximum temperature of 1000° F. Foil backing is silver.

LizardSkin 50100 Ceramic Thermal & Sound Insulation, 2 Gallon
(Part #91044050)
                        LizardSkin is a revolutionary product that can lower the interior temperature of a vehicle from 25 to 30 degrees. With only a .040" thick application, LizardSkin can also lower the interior noise level by 10 - 12 decibels by forming a 100% sealed seamless membrane over 100% of the car's interior. LizardSkin can also be used on the exterior of a vehicle and when used in wheel wells it reduces the chance of starring from thrown rocks. Since it is impervious to moisture after drying,  it helps to seal the surface to which it is applied. 

Sold in two-gallon buckets. Each covers 45-50 sq. ft. at 0.040" thickness dry. Add their Sound Control, also a spray-on, water-based product, and dramatically reduce interior noise even more.

  • Class A fire-rated
  • Environmentally friendly solution
  • Provides non-combustible thermal insulation
  • Eliminates cut and paste waste
  • Able to withstand temperatures up to 500°F
  • Adheres to most any material
  • Continuous protective moisture barrier
  • One-part coating system
  • Lightweight (around 0.1 lbs/ft2)
  • No respirator needed; but dust mask/protective eyewear is recommended
  • Easy spray-on application
  • Can be easily applied to irregular surfaces and geometries
  • Offers a protective, seamless membrane
  • Fast clean up with soap and water

Spec Sheet (PDF)

Heat Shield Aluminum Foil Tape
(Part #91058011)
                        

This insulation sealing tape is highly resistant to weathering and extreme temperature. Provides a tight seal against air and moisture transmission when applied to seams and other openings. Comes in a 2" x 30' roll.

HushMat Ultra Bulk Kit, Thermal and Sound Insulation
(Part #91080515)
                        A HushMat Ultra Bulk Kit is universal and designed to treat an entire small car.   It is the best kit to purchase if you are doing a complete vehicle build. HushMat Ultra reduces temperature, vibration and road noise.  HushMat is the #1 Rated sound and thermal insulator by Corvette Restorer Magazine.Hear the rumble on the outside and Cool and Quiet on the inside with a HushMat Bulk Kit.

    * HushMat Ultra requires no surface cleaning/preparation or heat guns to install
    * Withstands temperatures from -30 degrees up to +400 degrees Fahrenheit
    * Easy to mold around uneven surfaces
    * NO surface prep - no alcohol or acetone wash needed
    * No installation tools or heat guns required
    * Self Adhesive peel and stick; no secondary glue and NO spray
    * Trims with razor knife or household scissors
    * Installs in 1/2 the time versus other brands
    * Available in Silver or Black Foil

HushMat Bulk Kit contains thirty (30) 12” x 23” sheets or 58.1 Square Feet of OEM Approved Ultra damping/insulating material. HushMat sheets are easy for one person to handle and install.  

For the Highest performance install the HushMat Ultra Bulk Kit and HushMat Silencer Megabond 1/2" foam (Speedway Part #910-80524) on the Trunk Floor and over the wheel wells.  Install HushMat Silencer Megabond ¼” foam (Speedway Part #910-80522) on the back of your door trim panels and on the back of your headliner.  Install HushMat Ultra H2O damping paste (Speedway Part #910-80518) on the Trunk Lid for the ultimate sound and thermal insulating performance.  Check out Speedway’s HushMat ‘32 Coupe and ‘32 Sedan full vehicle kits for the manufacturer recommended kits for the complete vehicle.

HushMat Ultra Details (PDF)

Enjoy a Cool, Quiet and Comfortable Ride with HushMat.

Bulk Kit Application area:  Interior side of the following: Door Skins, door frame, firewall, floorpan, tunnel, roof skin, trunk floor, wheel wells, rear quarter panels and trunk lid.

See the GoodGuys Article.

HushMat 32 Ford Installation Guide (PDF)

LizardSkin 50115 Sound Control, 2 Gallon
(Part #91044052)
                        

LizardSkin Sound Control is a spray-applied automotive sound damping coating that is great for reducing exterior noises and enhancing sound systems. It is an advanced, water-based composition of a high-grade acrylic binder with sound-damping particles.

Sound Control is used by custom car, street rod, truck builders and anyone else who wants to reduce unwanted noise and/or enhance the sound of their high end audio systems. It is best applied by the SuperPro Application Kit to a clean and dry, rust-free surface. For maximum acoustic performance in your ride, encapsulate the entire interior and all appropriate exterior surfaces.

Since Sound Control not only dampens noise, but also protects surfaces, it will help keep the integrity of your ride intact for years. The coating can withstand temperatures to 300° F. One 2 gallon container of LizardSkin Sound Control will cover 40-45 sq. ft. at 0.040” thickness dry.

Spec Sheet (PDF)

Aluminized Heat and Noise Insulation Shield, Double Sided
(Part #91080249)
                        

Aluminized heat shield is constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening. 

  • Insulates against heat, noise and cold 
  • Mold and mildew proof
  • Fire retardent
  • Reflects 97% of infrared energy
  • Fiberglass reinforced
  • Double-sided aluminum backing
  • 4' x 6' sheet
Dynamat 10455 Xtreme Bulk Pack Cut-to-Fit Thermal and Sound Insulation
(Part #31010455)
                        

Reduce road noise and vibration while making your stereo sound twice as good fast with Dynamat. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 

Kit contains nine 18" x 32" pieces (36 square feet) of Dynamat Xtreme (.067" thick) for rear decks, doors, floors and trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels, under-hood installations and multi-purpose use.

Simply measure your application to order the necessary amount. This product dramatically cuts heat and noise from inside the vehicle for more enjoyable cruising and every day driving.

  • Use to get more bass, more music, lower road noise and better sound
  • Kit contains (9) nine 18" x 32" pieces (36 square feet)
  • Simply measure and cut to fit your application

Dynamat Information Sheet (PDF)

Dynamat Tech Spec Sheet (PDF)

DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
(Part #35610393)
                        Reflect-A-GOLD is a metalized polyamide  polymer laminated glass cloth with a high temperature pressure sensitive  adhesive for use in extreme temperature swing environments. It is  lightweight and easy to apply and remove. 

Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.

  • For firewalls, bulkheads, engine covers, floors, seat bottoms & more
  • Capable of handling continual temperatures up to 850°F
  • Resists UV degradation for long-term performance
  • Virtually NO clearance needed
  • Adhesive protected by a release liner rated up to 325°F
  • Light weight and flexible-Trim to size
  • Space age polymer material
  • Reflects up to 850°F! Reflecting 80% of heat!
  • Ultra light weight and self adhesive
DEi 010408 Cool-Tape Heat Reflective Tape, 1-3/8 Inch x 15 Ft.
(Part #35610408)
                        

Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses.

  • Withstands direct heat up to 400°F and 2000°F radiant heat
  • Protects lines, hoses, cables, and more
  • Aluminized and bonded to fiberglass
  • Flexible and easy to apply
  • Strong self-adhesive backing
  • Use to secure panels, seal air boxes, wrap wiring & more

Cool Tape Frequently Asked Questions (PDF)

DEi 010413 Cool-Tape Plus Heat Reflective Tape, 2 Inch x 60 Ft.
(Part #35610413)
                        

Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses.

  • Withstands direct heat up to 400°F and 2000°F radiant heat
  • Protects lines, hoses, cables, and more
  • Aluminized and bonded to fiberglass
  • Flexible and easy to apply
  • Strong self-adhesive backing
  • Use to secure panels, seal air boxes, wrap wiring & more

Cool Tape Frequently Asked Questions (PDF)

DEi 010461 Reflect-A-Cool Heat Reflective Tape Sheet, 12 x 24 Inch
(Part #35610461)
                        

Reflect-A-Cool, constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a racecar where typical mechanical fasteners cannot be used and has many industrial uses.

Reflect-A-Cool can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It’s that easy.

  • Protect wires, cables, hoses, pipes & tubing from radiant heat sources
  • Radiant heat protection up to 2000°F
  • Self-adhesive backing with release liner for easy installation
  • Moisture & solvent resistant
  • Virtually NO clearance needed

Reflect-A-Cool Frequently Asked Questions (PDF)

DEi 010491 Quick Fix Heat Tape, 1 x 12 Ft, Black
(Part #35610491)
                        High performance Quick Fix Tape bonds to  itself and is self-curing, forming a waterproof permanent seal. It's  ideal for emergency hose repair, non-slip grip surface for tools,  electrical splices and connections, serves as a temporary leak sealer,  and does not leave a sticky residue after removal. Just a few of it's  many uses. 

Extruded from a special high performance grade silicone compound and engineered at 700psi tensile strength, Quick Fix Tape has insulating capabilities up to 8,000 volts and stretches to three times its length for a simple stretch-and-wrap application. The triangular profile of the tape (the center is thicker than the edges) provides a smooth edge when over lapping tape.

  • Available in 1 in. wide x 12 ft. rolls
  • Withstands temperatures from -60 degrees F (-54 C) to 500 degrees F (260 C)
  • Seal ends of hoses, bundle & wrap wires, weatherproof connections & more
  • Can be applied to wet surfaces
  • Corrosion & moisture resistant
  • Permanent air / liquid tight seal
  • Resists solvents, oils, fuel, acids & chemical spills
Heat Resistant Contact Adhesive
(Part #91058010)
                        

This is a 12 oz. spray can of contact adhesive. Formulated for use with heat shields and insulation material. High heat resistance. Bonds to carpet, hood pads, headlining material, fiberglass, metal, plastic, and wood.

A minimum of one can is necessary when installing two 4' x 6' sheets (or 48 sq. ft.) of insulation.

Aluminum Sealing Tape, 2 Inch x 150 Ft.
(Part #91058012)
                        BONDED LOGIC ALUMINUM TAPE -- 2 in. x 150 ft.  Features a self-adhesive backing that seals seams and joint openings  when installing insulation. Locks out air and moisture. Weather and  temperature resistant.