Aluminized Heat and Noise Insulation Shield, 2-Ply

							                        

                                                        
Protect your equipment from radiant heat. Often used to create curtains and screens, this sheeting has an aluminum foil backing that reflects heat and withstands temperatures up to 300° F. The fiberglass fabric base is off-white and has a maximum temperature of 1000° F. Foil backing is silver.
                                                    

						                        

							                        

                                                        LizardSkin is a revolutionary product that can lower the interior temperature of a vehicle from 25 to 30 degrees. With only a .040" thick application, LizardSkin can also lower the interior noise level by 10 - 12 decibels by forming a 100% sealed seamless membrane over 100% of the car's interior. LizardSkin can also be used on the exterior of a vehicle and when used in wheel wells it reduces the chance of starring from thrown rocks. Since it is impervious to moisture after drying,  it helps to seal the surface to which it is applied. 
Sold in two-gallon buckets. Each covers 45-50 sq. ft. at 0.040" thickness dry. Add their Sound Control, also a spray-on, water-based product, and dramatically reduce interior noise even more.
Class A fire-rated
Environmentally friendly solution
Provides non-combustible thermal insulation
Eliminates cut and paste waste
Able to withstand temperatures up to 500°F
Adheres to most any material
Continuous protective moisture barrier
One-part coating system
Lightweight (around 0.1 lbs/ft2) 
No respirator needed; but dust mask/protective eyewear is recommended
Easy spray-on application 
Can be easily applied to irregular surfaces and geometries 
Offers a protective, seamless membrane
Fast clean up with soap and water
Spec Sheet (PDF)
                                                    

						                        

							                        

                                                        
These aluminized heat shields are constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening. Includes 4 feet by 6 feet of thermal and noise insulation.
Insulates against heat, noise and cold 
Mold and mildew proof
Fire retardent
Reflects 97% of infrared energy
Fiberglass reinforced
Single-sided aluminum backing
4' x 6' sheet 
                                                    

						                        

							                        

                                                        
You may not be Chip Foose, but you can use the same Dynamat products Chip does. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 
Kit contains nine 18" x 32" pieces (36 square feet) of Dynamat Xtreme (.067" thick) for rear decks, doors, floors and trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels, under-hood installations and multi-purpose use.
 Simply measure your application to order the necessary amount. This  product dramatically cuts heat and noise from inside the vehicle for  more enjoyable cruising and every day driving. 
Use to get more bass, more music, lower road noise and better sound
Kit contains (9) nine 18" x 32" pieces (36 square feet)
Simply measure and cut to fit your application 
Dynamat Information Sheet (PDF)
Dynamat Tech Spec Sheet (PDF)
                                                    

						                        

							                        

                                                        A HushMat Ultra Bulk Kit is universal and designed to treat an entire small car.   It is the best kit to purchase if you are doing a complete vehicle build. HushMat Ultra reduces temperature, vibration and road noise.  HushMat is the #1 Rated sound and thermal insulator by Corvette Restorer Magazine.Hear the rumble on the outside and Cool and Quiet on the inside with a HushMat Bulk Kit.

    * HushMat Ultra requires no surface cleaning/preparation or heat guns to install
    * Withstands temperatures from -30 degrees up to +400 degrees Fahrenheit
    * Easy to mold around uneven surfaces
    * NO surface prep - no alcohol or acetone wash needed
    * No installation tools or heat guns required
    * Self Adhesive peel and stick; no secondary glue and NO spray
    * Trims with razor knife or household scissors
    * Installs in 1/2 the time versus other brands
    * Available in Silver or Black Foil

HushMat Bulk Kit contains thirty (30) 12” x 23” sheets or 58.1 Square Feet of OEM Approved Ultra damping/insulating material. HushMat sheets are easy for one person to handle and install.  

For the Highest performance install the HushMat Ultra Bulk Kit and HushMat Silencer Megabond 1/2" foam (Speedway Part #910-80524) on the Trunk Floor and over the wheel wells.  Install HushMat Silencer Megabond ¼” foam (Speedway Part #910-80522) on the back of your door trim panels and on the back of your headliner.  Install HushMat Ultra H2O damping paste (Speedway Part #910-80518) on the Trunk Lid for the ultimate sound and thermal insulating performance.  Check out Speedway’s HushMat ‘32 Coupe and ‘32 Sedan full vehicle kits for the manufacturer recommended kits for the complete vehicle. 
HushMat Ultra Details (PDF)
Enjoy a Cool, Quiet and Comfortable Ride with HushMat.

Bulk Kit Application area:  Interior side of the following: Door Skins, door frame, firewall, floorpan, tunnel, roof skin, trunk floor, wheel wells, rear quarter panels and trunk lid.

See the GoodGuys Article. 
HushMat 32 Ford Installation Guide (PDF)
                                                    

						                        

							                        

                                                        
LizardSkin Sound Control is a spray-applied automotive sound damping coating that is great for reducing exterior noises and enhancing sound systems. It is an advanced, water-based composition of a high-grade acrylic binder with sound-damping particles. 
Sound Control is used by custom car, street rod, truck builders and anyone else who wants to reduce unwanted noise and/or enhance the sound of their high end audio systems. It is best applied by the SuperPro Application Kit to a clean and dry, rust-free surface. For maximum acoustic performance in your ride, encapsulate the entire interior and all appropriate exterior surfaces.
Since Sound Control not only dampens noise, but also protects surfaces, it will help keep the integrity of your ride intact for years. The coating can withstand temperatures to 300° F. One 2 gallon container of LizardSkin Sound Control will cover 40-45 sq. ft. at 0.040” thickness dry.
Spec Sheet (PDF)