Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Aircraft Style Fuel Filler Neck & Cap

SAME DAY SHIPPING!

Specs
Sold in Quantity:
Each
Overall Diameter:
4.875
Inside Diameter:
3.0
Thread Pitch:
1/4"-20
Bolt Hole Pattern:
4.375"
Gasket(s) Included:
Yes
Hardware Included:
Yes
Notes
Polyethylene cap is vented. Requires a 3-3/4" hole to sit flush.

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

Flush-mount caps offer excellent aerodynamic performance, large fill opening and attractive appearance. Cap features a positive seal, flip-up 1/4-turn handle, and a chain to secure it to the gas filler neck. Includes cap, chain, fuel filler neck, gasket, and all hardware. Polyethylene cap is vented.

Hole in tank needs to be 3-3/4" for cap to sit flush.

You may also be interested in:

JAZ Products 345-250-03 45 Degree Fast-Fill Fuel Cell Valve
                        

Cast aluminum fill valve mounts on fuel cell. Has spring loaded flapper valve. Mounts with twelve bolts on a 5" circle. 6-1/2" outside diameter. 2-1/2" hose end.

Requires split nut ring 458-358 to install.

2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
                        

These filler necks are manufactured from top-quality materials and are available in two sizes to best suit your application. You can count on these fuel cell filler necks to complete your performance fuel setup.

2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly 

This flange bolts to your fuel cell to permit attachment of a 2" I.D. filler hose.

This fill tube comes off of the flange at a 90 degree angle. 

  • O.D. of the flange is 5-1/16"
  • 6 mounting holes on a 4.36" bolt circle includes mount ring, bolts, and gasket
  • Filler neck is 2" O.D.
  • Aluminum construction

 

4 Inch Fuel Filler Neck for Fuel Cells
                        

This 4" diameter gas filler neck kit can be used as a replacement unit or for your custom fuel cell. Kit includes a mounting ring, rubber gasket, and bolts. 

Note: Cap not included, use cap 91076502.

Speedway Small Cobra Style Gas Cap
                        

This Speedway Cobra-style fuel filler cap includes a mounting gasket and stainless steel mounting hardware. 

  • Fully polished aluminum construction
  • Small Cobra Gas Cap is vented
  • Latch style flip top cap 
  • Cap measures 2-1/2" diameter
  • Hose fitting measures 2" diameter
Speedway Large Cobra Style Gas Cap
                        

This Speedway Cobra-style fuel filler cap includes a mounting gasket and stainless steel mounting hardware. 

  • Fully polished aluminum construction
  • Large Cobra Gas Cap is vented
  • Flip top style cap with roller latch
  • Cap measures 4-5/8" diameter
  • Mounting base measures 5-1/8" diameter
  • Hose fitting measures 2" diameter
1-1/2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
                        

These filler necks are manufactured from top-quality materials and are available in two sizes to best suit your application. You can count on these fuel cell filler necks to complete your performance fuel setup.

1-1/2 Inch Aluminum Remote Fuel Filler Neck Flange Assembly 

  • O.D. of flange is 5-1/16"
  • 6 mounting holes on a 4.36" bolt circle
  • Filler neck is 1-1/2" O.D.
  • Includes mount ring, bolts and gasket

This flange bolts to your fuel cell to permit attachment of a 1-1/2" I.D. filler hose. Aluminum construction.

45 Degree Fuel Filler Neck
                        
Gas Filler neck is made of heavy aluminum and works with 1-1/2 inch and 2 inch hoses. Includes all hardware, seals, and adaptor.
  • Heavy aluminum construction
  • Hardware and seal included
  • Works with 1-1/2" and 2" hose with included adaptor
Aircraft Style Fuel Filler Neck Replacement Gasket
                        

Replacement gasket for aircraft style gas filler neck # 91076510.

Gasket for Aircraft Style Fuel Cap
                        

Replacement gasket for aircraft style fuel cap # 91076510.