Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Afco Front Leaf Spring Bracket Mount

SAME DAY SHIPPING! Order within the next 53 minutes and receive same day shipping

Afco Front Leaf Spring Bracket Mount
Afco Front Leaf Spring Bracket Mount

Click image to enlarge

Speeday Motors Logo
X
Afco Front Leaf Spring Bracket Mount

Details

Reviews

Q & A

What's in the Box

Weld-on front leaf spring bracket mount for Chrysler springs. 5/8" hole w/ an inside width of 3-3/16". Center of hole to the top of the bracket is approximately 1-3/4".

Item Details

AFCO

You may also be interested in:

Front Leaf Spring Bracket Mount
                        Weld-on front leaf spring bracket mount for Chrysler springs. 5/8" hole with an inside width of 3-3/16". Center of hole to the top of the bracket is approximately 1-3/4".
                    
Speedway Chrysler Type Leaf Spring Shackle
                        

These rear shackles include the necessary bushings and are designed for Chryslers.

  • 4-7/8" large mount width
  • 3" small mount width
  • 3" center-to-center
Speedway Heavy Duty Chrysler Type Leaf Spring Sliders
                        

Leaf spring sliders bolt on in place of shackles. Heavy duty versions feature roller bearings that keep car from binding up during suspension movement. Comes with brass bushing for 1" I.D. spring eye.

Designed for Chrysler type mono-leaf and multi-leaf racing springs. They must be altered and modified to work with the Camaro/Nova/Firebird leaf springs.

  • Eliminates "jacking" problem associated with loading & unloading of the shackles
  • Helps maintain consistent spring rate for predictable handling
  • More rigid than typical shackle/bushing combination
  • Requires periodic lubrication of the bearings

Leaf Spring Slider Tech (GIF)

Chrysler/Pinto Leaf Spring Bushings
                        

Polyurethane bushing set for Chrysler-type rear leaf spring eye. Accepts a 9/16" bolt. Overall length is 1-3/8" including the shoulder, which is 3/16".

One pair of these leaf spring bushings services one rear spring eye.

 

AFCO 20229N Nylon Front Eye Chrysler Type Leaf Spring Bushing
                        
  • 3-piece design allows front eye to rotate as spring moves
  • Inner sleeve protects bushing and mount hardware for longer part life
  • Fits Chrysler-type spring

AFCO 20229P Chrysler-Type Pivoting Front Leaf Spring Bushing
                        

Fits front eye on AFCO Chrysler type leaf springs and eliminates binding. Only fits AFCO Chrysler springs (see Notes tab).  

  • Replaces rubber bushing and gets rid of bind
  • Allows front eye to rotate and twist in order to react to spring movement
  • Promotes more consistent handling

O.D of bushing is 1.490".

Instructions (PDF) 

AFCO 20236S Chrysler Roller Bearing Leaf Spring Slider
                        Leaf spring sliders bolt on in place of shackles. Heavy duty versions feature roller bearings that keep car from binding up during suspension movement. Designed and intended to work only with the Chrysler type mono-leaf and multi-leaf racing springs. 
  • 3-1/2" wide
  • 6-5/16" long
  • 2-9/16" tall
  • Width of flange is 4-1/2"
  • Mounting holes on width are 1-13/16" center to center
  • Mounting holes on length are 3" and 5-1/16"
  • Comes with brass bushing for 1" I.D. spring eye

Leaf Spring Slider Tech (GIF)