Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Aeroquip FBM3632 Push On Fitting Tool for AN4, AN6, AN8

SAME DAY SHIPPING! Order within the next 9 hours 35 minutes and receive same day shipping

Specs
Material Type:
Plastic
Sold in Quantity:
Each
Notes
To be used with AN4, AN6, and AN8 straight push-on hose fittings only.
Aeroquip FBM3632 Push On Fitting Tool for AN4, AN6, AN8
Aeroquip FBM3632 Push On Fitting Tool for AN4, AN6, AN8

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

It's a pain to push that blue hose onto a fitting! With this tool you don't need a vise or any other tools. Simply lube the inside of the hose, clamp the hose and give the lever a pull!

For AN 4, 6, 8 straight push-on fittings only.

You may also be interested in:

Speedway Aluminum AN Wrenches
SKU-91089800
                        Get rid of that adjustable wrench and never ruin a fitting again! These beautifully CNC manufactured AN wrenches are designed with the correct length handle to avoid over-tightening. Each wrench has the fitting size stamped on it for easy identification. Comes with AN 3 (.511"), AN 4 (.573"), AN 6 (.700"), AN 8 (.886"), AN 10 (1.011"), AN 12 (1.263"), AN 16 (1.513"), and AN 20 (1.850") sizes. 

We even throw in a free carrying case.
Aeroquip Special Application Socketless AN Hose, Blue
SKU-106332
                        
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!

    Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

  • Hose Fitting Sizing Chart (GIF)

    Full Flow Hose End Coupler Fitting, 45 Degree Angle, Red/Blue, -4 AN
    SKU-6171008
                            

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617304).

    • -4 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Red/Blue corrosion resistant finish

    45° Full Flow Ends come in sizes of AN4,AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

    Aeroquip FBM4042 Hose End Coupler Fitting, 120 Degree, Blue/Red, -6 AN
    SKU-6171022
                            

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

    • 120 Degree 
    • Aluminum
    • Hose End Size: -6 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -6 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    Fitting Thread Application Chart (GIF)

    Aeroquip FBM3553 Push-On Hose Fitting Lube
    SKU-6173553
                            

    Aeroquip Hose Assembly Lube is a specially formulated lubricant for use in hose assembly work. Makes hose assembly a snap.

    Available in pint containers. Use for either hand or machine assembly.

    Learn why using assembly lube is so important in our tech article, Installing New Hardware.