Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Adjustable Oil Pressure Warning Light Kits

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Color:
Red
Sold in Quantity:
Kit
Hole Diameter:
-
Wire Length:
3.00
Notes
Includes light, wire, three terminals, 1/8" NPT sender, and brass "T" fitting with 1/8" NPT threads.
Adjustable Oil Pressure Warning Light Kits
Adjustable Oil Pressure Warning Light Kits
Adjustable Oil Pressure Warning Light Kits

Click image to enlarge

Details

Reviews (0)

Q & A (4)

What's in the Box

Info

Alerts driver to any problem before it becomes a hazard. Easy to install. Available with 3/4" or 1" diameter light.

  • Red color light
  • Sender is preset at 30 lbs. (adjustable +/- 10 lbs.)
  • Sender has 1/8" NPT threads
  • Brass tee fitting has 1/8" NPT threads
  • Includes 3 ft. of 14 ga. wire 

604-50604 Instructions (PDF)

Item Details

Adjustable

Customer Reviews

This product has no reviews.

Product Q&A

4 questions : 4 answers

1 answers

How do you lower the preset pressure of 30 lbs. ?

Rockbuster
October 04, 2014

How do you lower the preset pressure of 30 lbs. ?

Answers

October 06, 2014
EricM
To change the pressure setting remove the rubber plug in the top of the sender. At the bottom of the hole is a hex nut. Use a 7/32” allen wrench to adjust. Turn clockwise to increase pressure, counter-clockwise to lower. Replace rubber plug when done.
1 answers

Adjustable from what pressure to what pressure? What is the range? What is the thread (NPT?) for the sensor?

K2
Long Beach, CA
March 31, 2011

Adjustable from what pressure to what pressure? What is the range? What is the thread (NPT?) for the sensor?

Answers

April 04, 2011
Jason R.
This is set at 30 psi, and is adjustable +- 10 psi. The sensor fitting is 1/8" NPT
1 answers

How do you wire this up ?

Dave
July 13, 2011

How do you wire this up ?

Answers

July 14, 2011
Jason
Connect red wire to power(12 volts), connect the black wire to the sender. The bulb is lit when oil pressure drops below the specified limit and the sender completes the ground
1 answers

Will red light illuminate with key on at start up and then turn off when pressure goes up to pre set pressure warning?

Rusty racer
August 16, 2015

Will red light illuminate with key on at start up and then turn off when pressure goes up to pre set pressure warning?

Answers

August 18, 2015
Eric
Expert
Yes the oil pressure warning light will light up at any time that the oil pressure is below the set value on the sender (30 psi +/- 10). When you have the key in the on position and the engine is not running the light will be on.
Page 1 of 1

You may also be interested in:

Suggestions For You