ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Adhesive for Tire Rubber

SAME DAY SHIPPING! Order within the next 3 hours 8 minutes and receive same day shipping

Adhesive for Tire Rubber

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

This adhesive is a special glue for tire rubber. 

Customer Reviews

This product has no reviews.

Product Q&A

1 questions : 1 answers

1 answers

what is the best method to use this product ? do you glue the ends together & then stretch it over ? or put it on the rim & then glue it ?

ronsbodyworkss
January 22, 2015

what is the best method to use this product ? do you glue the ends together & then stretch it over ? or put it on the rim & then glue it ?

Answers

January 23, 2015
EricM
I have found the best method of creating the pedal car tires is to clean/paint/prepare your wheels as you choose. Of course you want to have removed any remains of the original tire, any rust or scale that remained, etc. Next, wrap the bulk rubber material around the wheel (lay it in the groove of the wheel where it would normally be) and mark the rubber where it would meet up with the very end of the material. Now, unwrap the material from the wheel and cut the material about ¼” short of that mark. Make sure the cut ends of the rubber are smooth and straight. While the tire is still off the wheel, apply a couple of drops of the adhesive to one face of the rubber and join the two ends together. Be sure to align the ridges of the material without inducing a twist in the material. You can hold the tire ends together for about 30 seconds to make sure the adhesive has a good grip, then I normally place the tire inside a coffee can or bowl or a loop I made ahead of time for a few hours until I am certain the glue is dry. To install the new tire I lay the glued “seam” of the tire into the groove of the wheel first and gently roll the rest of the tire over the remaining wheel lip. Verify that the tire does not have any “twists” in it, and you’re all done!
Page 1 of 1