Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

ARP Fasteners 134-4001 Small Block Chevy Head Stud Kit

SAME DAY SHIPPING! Order within the next 9 hours 37 minutes and receive same day shipping

ARP Fasteners 134-4001 Small Block Chevy Head Stud Kit
ARP Fasteners 134-4001 Small Block Chevy Head Stud Kit

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

Install an ARP Small Block Chevy (SBC) head stud kit to enhance cylinder head sealing, ensure consistent torque values and help prevent damage to threads in the block. 

All kits come with aerospace-quality nuts and parallel-ground, hardened washers.

Not for raised runner heads.

 

You may also be interested in:

ARP Fasteners 234-4601 Small Block Chevy Undercut Head Studs
(Part #1012344601)
                        Install an ARP Small Block Chevy (SBC) head stud kit to enhance cylinder head sealing, ensure consistent torque values and help prevent damage to threads in the block. 

All kits come with aerospace-quality nuts and parallel-ground, hardened washers.  Kits include undercut short studs that all but eliminate head gasket failure. Undercut studs have a narrowed area on the center of the stud shank. These undercuts add more tensile strength to the stud. 190,000 PSI.

Not for raised runner heads.


Manley 42171 Small Block Chevy Head Bolts
(Part #50542171)
                        

Heavy duty design, longer than stock, for use with head bolt washers. 

  • 180,000 PSI material
  • Longer than stock for use with washers
  • Improved wrenchability with 1/2" hex head

Order one set per head (two sets required per motor). Washers sold separately. 

Speedway Small Block Chevy Head Bolt Set
(Part #9158002)
                        Stock length, grade 8 cylinder head bolts with a 5/8" hex head. For S/B Chevy. Set does one engine.
                    
Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
(Part #3441003)
                        

These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

  • Gaskets are sold each
  • Pre-flattened steel wire
  • Nominal compression thickness: .041"
  • Compressed volume: 9.1 cc
  • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer
  • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

Head Gasket Application (JPEG)

Speedy Tip for Proper Head Gasket Seal (GIF)