Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

ARP Fasteners 134-4001 Small Block Chevy Head Stud Kit

Price:
$179.99
ST
In Stock
Item #:
101RHS1
ARP Fasteners 134-4001 Small Block Chevy Head Stud Kit
Click image to enlarge Click image to enlarge
No video at this time.
 
Install an ARP Small Block Chevy (SBC) head stud kit to enhance cylinder head sealing, ensure consistent torque values and help prevent damage to threads in the block. 

All kits come with aerospace-quality nuts and parallel-ground, hardened washers.

Not for raised runner heads.

 

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
You May Also Be Interested In...
  • Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    (1 Rating)
    Price: $39.99
    More Info
    Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    x 
    							                        
    
                                                        
    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.
    • Gaskets are sold each
    • Pre-flattened steel wire
    • Nominal compression thickness: .041"
    • Compressed volume: 9.1 cc
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer
    • When  using aluminum heads, we recommend gaskets with soft copper wire  rings (such as 344-1010). This ensures that the aluminum head is not  "scarred" by the combustion seal. Shim style 344-1094 will also work  well with aluminum heads.
    Head Gasket Application (JPEG)
    Speedy Tip for Proper Head Gasket Seal (GIF)  
  • Manley 42171 Small Block Chevy Head Bolts
    Manley 42171 Small Block Chevy Head Bolts
    Price: $29.99
    More Info
    Manley 42171 Small Block Chevy Head Bolts
    x 
    							                        
    
                                                        
    Heavy duty design, longer than stock, for use with head bolt washers. 
    • 180,000 PSI material
    • Longer than stock for use with washers
    • Improved wrenchability with 1/2" hex head 
    Order one set per head (two sets required per motor). Washers sold separately. 
  • Speedway Small Block Chevy Head Bolt Set
    Speedway Small Block Chevy Head Bolt Set
    (1 Rating)
    Price: $34.99
    More Info
    Speedway Small Block Chevy Head Bolt Set
    x 
    							                        
    
                                                        Stock length, grade 8 cylinder head bolts with a 5/8" hex head. For S/B Chevy. Set does one engine.
  • ARP Fasteners 234-4601 Small Block Chevy Undercut Head Studs
    ARP Fasteners 234-4601 Small Block Chevy Undercut Head Studs
    (1 Rating)
    Price: $219.99
    More Info
    ARP Fasteners 234-4601 Small Block Chevy Undercut Head Studs
    x 
    							                        
    
                                                        Install an ARP Small Block Chevy (SBC) head stud kit to enhance cylinder head sealing, ensure consistent torque values and help prevent damage to threads in the block. 
    All kits come with aerospace-quality nuts and parallel-ground, hardened washers.  Kits include undercut short studs that all but eliminate head gasket failure. Undercut studs have a narrowed area on the center of the stud shank. These undercuts add more tensile strength to the stud. 190,000 PSI.
    Not for raised runner heads.