Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

ARP Fasteners 200-2902 Chevy Flexplate Bolts

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Material Type:
Steel
Sold in Quantity:
Set
Finish:
Painted
Wrench Type:
12 Point
Thread Pitch:
7/16"-20
Overall Length:
1.00
Under Head Length:
.68
ARP Fasteners 200-2902 Chevy Flexplate Bolts

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

Flexplate bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

Fits Chevrolet 90° V6 & 265-454 Chevy V8 with 2-Pc rear seal. Set of 6 bolts.

  • Exclusive, flat, 12-point head design
  • Larger than stock shank diameter for increased strength and improved flexplate register
  • Originally developed for NASCAR Winston Cup competition
  • 200,000 psi rating

Item Details

7/16"-20 x .680"

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Pete
Milford, CT

Perfect replacement

April 22, 2010
Great item
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

3 questions : 3 answers

1 answers

will these bolts work on the newer crate motors i have a 10lb flywheel so it is very thin. will it clear the stock clutch.

derail
florida
March 20, 2011

will these bolts work on the newer crate motors i have a 10lb flywheel so it is very thin. will it clear the stock clutch.

Answers

March 24, 2011
Jason R.
These bolts will work if the flywheel is thin enough to use .680 underhead length bolts.
1 answers

Will these bolts work with a quartermaster vdrive or do I need longer bolts?

racersteve
Oak Creek , WI
May 09, 2011

Will these bolts work with a quartermaster vdrive or do I need longer bolts?

Answers

May 14, 2011
Scott
Depending on what you are using for a flex plate these bolts could be long enough for you. With some Flex plates you might need to use longer bolts.
1 answers

flexplate bolts ? Will these flexplate bolts work in a 86- 98 one piece rear main Chevy ?

KyTrash
October 10, 2012

flexplate bolts ? Will these flexplate bolts work in a 86- 98 one piece rear main Chevy ?

Answers

October 10, 2012
Jason
Part #1012002902 is listed upto 1989 for Chevy and fit 2 piece rear main seal only
Page 1 of 1

You may also be interested in:

Chevy Flexplate Safety Shield
(Part #91048327)
                        Safety shield required by many sanctioning bodies when running automatic transmissions. Fits Chevy only. Not SFI Certified.
                    
1955-85 Small Block Chevy Balancing Plate
(Part #91615375)
                        When running a 383 or 400 S/B Chevy with a 153 tooth flexplate or flywheel, you need to have a balancing plate. These fit between the crankshaft and flexplate and correctly balance the engine without resorting to a big heavy flywheel. 

Lets you balance your Small Block Chevy 400 or 383 with a 350 flywheel (manual transmission flywheel or automatic transmission flex plate) and a bolt-on balancing plate. Road and race tested. Allows use of lighter 350 flywheel to rev quicker. Precision stamped steel.

916-15375 Instructions (PDF)

Quick Time RM-6091 Chevy Auto Trans Midmount Plate with Safety Shield
(Part #91027030)
                        Fits all Small Block Chevy blocks. Fits Powerglide, 350 and 400 transmissions, clears 153 tooth flexplate. SFI 30.1 certified. Fits between the transmission and the motor, safety shield slides inside transmission. Makes changing motor transmission easier. Zinc plated.
                    
Small Block Chevy Flexplate Spacers
(Part #91048367)
                        

If you don't have at least .125" between the end of the starter drive and the flexplate, you're asking for trouble. These spacers allow you the clearance needed to make your lightweight flex plate live. Includes a .030", .035", .045", .055" and .070" spacers. S/B Chevy. 

-74:  For use with '55-'85 two-piece S/B Chevy crank
-86:  For use with '86-Up one-piece S/B Chevy crank

Flywheel Bolt Kit - 6 Piece
(Part #605530)
                        

These steel flywheel bolts are sold in a set and come with a black oxide finish. These flywheel bolts are used with light weight flywheel (60515101).

  • 12 Point Wrench Type
  • Steel Construction
  • Black Oxide Finish
  • Sold as Set of 6
  • For flywheel (60515101)
  • 7/16 X .680"
ARP 100-2901 Chevy V6/V8 / Ford V8 High Performance Flexplate Bolt Kit
(Part #1011002901)
                        

Flexplate bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

  • Exclusive, flat, 12-point head design
  • Larger than stock shank diameter for increased strength and improved flexplate register
  • Originally developed for NASCAR Winston Cup competition
  • 200,000 psi rating
  • UHL: 0.680"
  • Thread Size: 7/16-20
  • Wrenching: 3/4"
  • Set of 6 bolts

Fits:

  • Chevrolet 90° V6
  • 265-454 Chevy V8 with 2-Pc rear seal
  • Ford 289-400 V8