Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
We're sorry, this item is not available.
We're sorry, this item is not available.
AFCO Upper Control Arm Parts
Click image to enlarge Click image to enlarge
No video at this time.
 

AFCO Upper Control Arm Parts

AFCO Bushing

AFCO Ball Joint Sleeve - Small Threaded

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
You May Also Be Interested In...
  • Price: $13.99
    More Info
    AFCO 20080 Upper Arm Mount
    x
    							                        

    • 3/8" steel plate
    • 6" bolt centers
    • 2° anti-dive
    • Ideal for stock stub cars

  • (1 Rating)
    Price: $78.99
    Sale Price: $69.99
    11% off
    More Info
    AFCO 20002RL Offset Upper Control Arm-Aluminum Cross Shaft, 8-3/4 Inch
    x
    							                        

    AFCO's foundation was built on fabricating tubular control arms for the racing industry. Because they pay attention to the details and adhere to the strictest manufacturing tolerances, AFCO control arms have been the choice of professional racers and chassis-builders for over two decades. The quality of fabricated chassis components, such as tubular control arms, is not something to take lightly. As a structural member of the suspension, a failure of a control arm due to improper design or poor workmanship can causes serious consequences.

    • Cross shaft bushings are clearanced to allow shrinkage during the welding process
    • Strong cold-stamped (not flame-cut) 3/16" ball joint plate for greater strength and consistency
    • Accurate 10 degree angle built into ball joint ring to allow greater suspension travel
    • Popular for GM clip
    • Universal design for RH or LH use
    • Uses 9/16" holes on 6" center

  • Price: $78.99
    Sale Price: $69.99
    11% off
    More Info
    AFCO 20000-2 Strut Type Upper Control Arm-Aluminum Cross Shaft, 7 Inch
    x
    							                        

    • Strut type tubular upper control arm
    • Made from .083" wall tubing (under 10") and .120" wall tubing (over 10")
    • Cross shaft bushings clearanced to allow shrinkage during the welding process
    • Cross shaft uses 9/16" holes on 6" center
    • 3/16" thick ball joint plate provides maximum strength
    • Accepts Moog K6024 or K6136 style bolt-in ball joints
    • Length measured from cross shaft centerline to ball joint center

    Adjusting Camber (GIF)

  • Price: $10.99
    More Info
    AFCO 20073 Upper Control Arm Bushing
    x
    							                        

    AFCO Upper Control Arm Parts

    AFCO Bushing