AFCO Swaged Steel Tube 7/8 Inch O.D. (5/8) Inch, 4 Inch Long

							                        

                                                        
Each 3/4" thread steel swaged sleeve has a 1" O.D. tube, 0.095 wall, and 3/4" RH and LH fine threads. IMCA appproved. Sold each. 
These are clearance priced because we no longer offer this length.
NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments
                                                    

						                        

							                        

                                                        
AFCO swaged steel tubes are formed using .095" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
Consistent wall thickness allows better thread engagement
Yellow zinc-plated for increased part life
Deep knurl for easy length adjustments