Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

AFCO 1000 Gas Shock End 1/2 I.D. x 0.625 Inch Wide Bearing

Specs
Sold in Quantity:
Each
Overall Diameter:
1.06
Inside Diameter:
.500
Notes
.625" over all wide
AFCO 1000 Gas Shock End 1/2 I.D. x 0.625 Inch Wide Bearing

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

AFCO Gas Shock End 1/2 I.D. x 0.625 Inch Wide Bearing

Replacement Teflon lined spherical bearings for all AFCO shocks except K-Series.

  •  1/2 Inch I.D. x 0.625 Inch Wide

Customer Reviews

This product has no reviews.

Product Q&A

1 questions : 1 answers

1 answers

What are the overall dimensions? What is the diameter of the entire bearing?

curious
October 11, 2012

What are the overall dimensions? What is the diameter of the entire bearing?

Answers

October 12, 2012
Jason
This bearing is 1.06" od, .500" id, .625 over all thick and housing is .385" thick
Page 1 of 1

You may also be interested in:

Speedway Weld-On Lower Mount for Bearing End Shocks
(Part #91721000)
                        Weld-on shock mount for bearing end shocks (spherical bearing or heim). Has a 1/2" hole. Use short pin in place of shock bolt on this bracket.
                    
AFCO Medium Shock Bumper
(Part #106201743)
                        

These AFCO bump rubbers fit on your shocks to prevent them from bottoming out and getting damaged on a rough track. They’re cheap insurance for expensive shocks.

Yellow medium hardness. Aluminum cone seat not included.

AFCO 1007X Shock End 1/2 I.D. x 1.06 Inch Wide Drag Bearing-Comp Lined
(Part #1061007X)
                        

Replacement Teflon lined spherical bearings for all AFCO shocks except K-Series.

AFCO Racing's quality and design help these replacement shock bearings stand up to the toughest standards and conditions, from daily commuting to full-on racing. These shock bearings are replacements for your AFCO Racing shocks. They are available for street rod, race, and coil-over applications.

AFCO Shock End Drag Bearing, Comp Lined

  • 1/2 I.D. x 1.06 Inch Wide
  • standard bearing
  • Bearing housing is 1.06" o.d. and 1" wide.
  • Sleeve is .683" o.d. and .390" wide
AFCO 20182-2 Shock End 1/2 Inch I.D. Polyurethane Bushing Kit, 2 Pack
(Part #106201822)
                        

Replacement polyurethane bushings for all AFCO shocks except K-Series.

AFCO Shock End Polyurethane Bushing Kit

  • 1/2 Inch I.D.
  • Steel sleeves
  • 2 Per Package