AFCO 10439 HD Shank Steel Heim Rod End, 3/4-16 LH Male, 5/8 Inch Hole
Click image to enlarge
Q & A
What's in the Box
- Used under potentially rough conditions
- Bore size is one size smaller than shank and body
This product has no reviews.
No questions have been asked.
You may also be interested in:
Aluminum X-Series Heim Joint Rod Ends, 3/4-16 LH Male, 5/8 Inch HolePrice: $16.99More InfoCompare
Pro-1 Chromoly Heim Joint Rod Ends, 3/4-16 LH Male, 5/8 Inch HolePrice: $16.99More InfoCompare
Chromoly Heim Joint Rod Ends, 3/4-16 LH Male, 5/8 Inch HoleMore InfoCompare
Precision X-Series Heim Joint Rod Ends, 3/4-16 LH Male, 5/8 Inch HolePrice: $17.99More InfoCompare
QA1 PCYML10-12T High Misalign Heim Joint Rod Ends 3/4-16 LH M 5/8 HolePrice: $18.99More InfoCompare
Aluminum Heim Rod End Reducer, 3/4 Inch Bore to 5/8 BoltPrice: $2.99More InfoCompare
AFCO 10141 Steel Jam Nut, 3/4-16 LH$1.99Price: $1.35More InfoCompare
Seals-It WS6250 Heim Joint Rod End Seals, 5/8 Inch Hole, Set/6More InfoCompare
Steel Cone Spacers for Rod Ends, 5/8 InchMore InfoCompare
Aluminum rod ends have close tolerance, 3-piece, medium duty design. Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball with a Kevlar race. Self lubricating Teflon liner seals out dirt an debris
Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.
Assebly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
Aluminum Rod End Chart (GIF)
These Pro-1 rod ends are general purpose, 2-piece, heavy duty rod ends. They feature a chromoly steel body and are black oxide coated to resist corrosion. Heat treated, precision ground ball without a race (metal to metal contact). Pro-1 ends will withstand a greater static load than our "Standard" or "Precision" rod ends.
Applications: Steering & suspension components on moderate to high horsepower applications.
Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
Pro-1 Rod End Chart (GIF)
Heat treated, 4130 chromoly steel body with hard chrome, heat treated ball to support heavy shock loads. Injection molded Kevlar/Teflon® liner seals out dirt and debris.
- Kevlar/Teflon® race reduces slop & eliminates binding
- Provides smooth & precise movement of steering & suspension
- The ultimate in strength & durability
Applications: Steering & suspension for racing & high horsepower applications.
Chromoly Rod End Chart (GIF)
These rod ends are used when you need to combine different sized rod shank and through hole. These ends offer greater strength than our "standard" rod ends.
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
- Heat treated chromoly alloy steel body
- Functions with up to 64° of misalignment
- Designed for high misalignment applications
- PTFE self-lubricating lining
- Black oxide coated for corrosion resistance
- Sold individually
Item DetailsT = 2", L = 3-3/8", W = 1-3/8"
- Used to reduce rod end bore
- Reducers fit entirely in the rod end ball
Steel fine thread jam nuts for use with rod ends, heim joints, and clevis.
Item DetailsSize: 3/4"-16
These rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.
For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.
These steel tapered spacers give you more travel when using rod ends on your steering linkage or suspension. Includes 8 spacers per package.