Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

AFCO 3895M Eliminator Rear Shocks, Single Adj - Mopar

SAME DAY SHIPPING! Order within the next 12 hours 49 minutes and receive same day shipping

AFCO 3895M Eliminator Rear Shocks, Single Adj - Mopar
AFCO 3895M Eliminator Rear Shocks, Single Adj - Mopar

Click image to enlarge

Speeday Motors Logo
X
AFCO 3895M Eliminator Rear Shocks, Single Adj - Mopar

Details

Reviews

Q & A

What's in the Box

AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

  • Lightweight aluminum construction easily dissipates heat 
  • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
  • Smooth, Ultra Low Friction rod guide
  • Low resistance allows internals to function to their fullest potential
  • Almost no "stiction" to interfere with putting the power down
  • Coil-over Ready

See Applications tab for Chrysler/Dodge/Plymouth chassis fittment.

Application

Warning - The chart below is a general guide only. We highly recommend you measure your chassis for proper length and mount points before ordering.

How to Choose Shock Length

  • CHRYSLER
    • '74-'78 Fullsize
    • '57-'64 Fullsize
  • DODGE
    • '70-'74 Challenger
    • '65-'72 Charger/Coronet
    • '75-'76 Cordoba
    • '77-'79 Magnum
    • '64-'76 Dart
    • '62-'78 Monaco
    • '61-'62 Monaco
  • PLYMOUTH
    • '64-'74 Barracuda
    • '73-'74 Satellite/Belvedere
    • '65-'72 Satellite/Belvedere
    • '62-'70 Savoy/Fury/Belvedere
    • '67-'70 GTX
    • '68-'75 Roadrunner
    • '64-'76 Duster/Valiant

Notes

  1. The rebound adjustment is the most critical in tuning a drag racing set-up. This adjustment allows the tuner to dial in the "un-loading action" of the chassis and keep the tires planted during the critical first 60' down the track.
  2. Coil-over kit hardware is included. Coil spring NOT included.

Specs

  • Body Mount:  5/8" I.D. Bearing (1/2" wide)
  • Shaft Mount:  1/2" I.D. Bearing (5/8" wide)

Item Details

Single Adjustable
15.90" Comp, 24.90" Ext

You may also be interested in:

AFCO Yellow 2-5/8 I.D. Coil-Over Springs, 4 Inch
                        

There's a lot riding on your springs-literally. Springs are your car's connection to the ground, and their performance is directly related to all other suspension components. Inconsistent, weak springs can cause a multitude of handling problems, and in some cases, dangerous situations. When it comes to choosing coil springs there are many alternatives, but if you want the best you can get, the choice is clear: choose Afcoils. 

All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. Choose your length and rate. 

  • Machine-ground on both ends to tolerances within 1 degree
  • Pressed to solid height and "pre-set" - eliminates potential for additional set
  • Optimized material thickness and coil spacing
  • Made of super-high tensile strength chrome silicon wire for long life and and a consistent rate
  • All springs are cold wound on the latest automated coiling equipment and heat treated twice during manufacturing to be able to withstand even the most abusive conditions
  • To further enhance durability, Afcoils are shot-peened and coated with a durable yellow finish

Afcoil Spring Rate Guide (GIF)

AFCO 6895M Reactor Rear Drag Shocks - Mopar
                        

AFCO Single Adjustable Monotube REAR shocks are an economical alternative to the fully double adjustable design. The single adjustable gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock. Coil-over kit is included.

  • Quicker R.T.'s
  • Gas Mono-tube design for superior tuning and performance
  • Rebound adjustable only - will not bleed over to compression
  • Includes coil-over kit
  • 100% co-Tested and Serial Numbered

See Applications tab for Chrysler/Dodge/Plymouth chassis fittment.

AFCO 3890M Eliminator Rear Shocks, Double Adj - Mopar
                        

AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

  • Lightweight aluminum construction also helps dissipate heat
  • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
  • Compression settings are adjusted via a body-mounted know with 32 clicks
  • Smooth, Ultra Low Friction rod guide
  • Low resistance allows internals to function to their fullest potential
  • Almost no "stiction" to interfere with putting the power down
  • Coil-over Ready

See Applications tab for Chrysler/Dodge/Plymouth chassis fittment.