Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
We're sorry, this item is not available.
We're sorry, this item is not available.
AFCO Aluminum Radiators 1938 Chevy Car
Click image to enlarge Click image to enlarge
No video at this time.
 

When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

For 1938 Chevrolet passenger cars.

  • 100% Aluminum construction (no epoxy)
  • Furnace brazed core
  • Tanks are made of .080” 3003 aluminum for strength and durability
  • TIG welded by skilled craftsmen in the USA
  • Factory pressure-tested
  • Filler necks feature screw-in bleed – won't crack or leak with age
  • Height w/o Brackets & Filler:  27-1/8"
  • Width w/o Brackets:  17"
  • Brackets are angled - top towards engine, bottom is forward
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
You May Also Be Interested In...
  • Price: $74.99
    More Info
    Walker WS40 Radiator Fan Shroud, Style A, 20 x 21 Inch
    x
    							                        

    Maximize your radiators' effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

    Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

    See Application tab for application information.

    Fan Shroud Size Chart (GIF)

  • (3 Ratings)
    Price: $33.99
    More Info
    AFCO 80152-16 Billet Aluminum Radiator Cap
    x
    							                        

    This 16 lb. radiator cap is made of billet aluminum and fully polished.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.  

  • Price: $264.99
    More Info
    Cooling Components CCI-1740 Cooling Machine Electric Fan, Style 40
    x
    							                        

    At one time or another we all have had a car overheat. These fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud.

    • 24.44" wide x 19" high
    • Can be easily reduced in size to 21-5/8" wide x 17-1/4" high
    • 12 volt operation
    • Lower engine operating temperatures
    • Saves horsepower
    • Better fuel mileage
    • Constructed of high-impact ABS material

    Note:  This fan motor requires the use of a 70 amp or larger fan relay.

    Fan Application Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Price: $619.99
    More Info
    Walker C-502-1 Cobra 1938 Chevrolet Radiator
    x
    							                        

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Chevy Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Price: $604.99 - $1,257.99
    Sale Price: $597.99 - $1,257.99
    Up to 1% off
    More Info
    AFCO 1933-34 Ford Car Aluminum Radiator, Chevy Engine
    x
    							                        

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age
    • 17” Core Width
    • 3”Core Thickness
    • 27” Overall Height (from bottom of bottom tank to top of top tank)
    • 20.25" Overall Width
    • 5° Layback

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • Price: $569.99 - $1,257.99
    More Info
    AFCO 1938 Chevy Aluminum Radiator, Chevy Engine
    x
    							                        

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    For 1938 Chevrolet passenger cars.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Instructions (PDF)

       
    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.