AFCO 80127NP Universal Fit Aluminum Radiator, 24-1/4 x 19 Inch, GM

							                        

                                                        
Mounting radiators can be a real pain, but these universal radiator mounting brackets will makes it a little easier. Brackets are designed to mount our universal aluminum crossflow radiators with a 3" thick core to a variety of applications. Don't forget to order the rubber insulator pads (sold separately).

917-34700-STL 
This kit contains 4 steel brackets. The lower brackets measure 3-1/4" inside to inside. The upper brackets measure 2-1/2" inside to inside.

917-34700-ALU 
This kit contains 4 aluminum brackets. 2 lower mounts brackets and 2 upper mount brackets (for weight savings). The lower brackets measure 3-1/4" inside to inside. The upper bracket measure 2-1/2" inside to inside.
917-34700-SS
This kit contains 4 stainless steel pieces. 2 lower  mounts brackets and 2 upper mount brackets. The lower brackets measure  3-1/4" inside to inside. The upper bracket measure 2-1/2" inside to  inside. 
 
                                                    

						                        

							                        

                                                        
A must have when racing! High pressure cap for radiators raises boiling point of water.
Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles. 
                                                    

						                        

							                        

                                                        
These AFCO Universal Fit Aluminum Crossflow Radiators use all the same technology that their Direct fit radiators do, but they do not have application specific mounting flanges and tabs. So if you are building something a little different or just want to save some cash these will fit the bill. We also have electric fan/shroud combos for these radiators listed. 
All measurements include the end tanks. Overall width includes mountings flanges if used. 
1-1/2" upper hose neck on the drivers side
1-3/4" lower hose neck on the passenger side
1/4" NPT brass drain cocks
Welded-on 2" wide side mount flanges on most models
Built-in fin covers on top and bottom of radiator
Do not have built-in transmission coolers
10680103NP: 1960-1968 Chevy Fullsize with 22 3/8" Core - Crossflow
Instructions (PDF) 
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
This 16 lb. radiator cap is made of billet aluminum and fully polished.
Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.   
                                                    

						                        

							                        

                                                        
With 2 rows of 1" cores, AFCO Performance Series Radiators are perfect for  the street, the strip, or anything in between. These crossflow radiators feature  2" mounting flanges which can be easily adapted to many applications. They are  100% TIG welded, 100% pressure tested and use no epoxy or sealers. Roughly fits  1967-1969 Chevrolet Camaro and 1967-1969 Pontiac Firebird (GM F-Body).  
100% Aluminum construction (no epoxy)
Furnace Brazed Core - 2 rows of 1" tubes
TIG welded by skilled craftsmen in the USA
Billet filler neck offers strength and higher quality appearance over  stamped
Buil-in fin covers (top & bottom) provide a great finish & aid  installation 
Drain Cock included
Inlets and outlets are positioned correctly for ease of flow
NOT a direct fit - measure your application. May  require some modifications and/or fabricating for proper fit. 
Fan/Shroud Assembly sold separately. 
Instructions (PDF)  
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
Single 16" S-Blade Fan, 17.7 Amp for 10680101NP/FNP, 10680103NP/FNP, 10680103NPZ, and 10680103FNPZ.
This fan/shroud assembly measures app. 4-1/8" from front-to-back at the center of the motor.  The motor is app 5" in diameter.  Just beyond the motor, the depth is app.1-3/4".  At the outer edge of the fan, the depth is app. 1-3/8".  The depth at the outer edge of the shroud is app. 3/4".
Instructions (PDF) 
Learn more about how radiators work, the importance of using a fan and shroud, and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        This kit may be used to repair small leaks in aluminum radiators. 
                                                    
						                        

							                        

                                                        AFCO's billet aluminum radiator filler necks offer improved strength and appearance over stamped versions comes. Comes with a 1/8" aluminum hose nipple. 
                                                    
						                        

							                        

                                                        
This AFCO electric fan switch uses a ground wire to turn the electric cooling fan on. The thermal fan switch features a 1/4" NPT threaded brass body with a spade terminal for hook-up. Cooling fan switch activates a cooling fan relay (not included, sold seperately) when the bulb is immersed in coolant that is 200° F. When the engine cools to 185° F, the contacts on the fan relay switch open, and the fan stops automatically. Make sure the temperature fan switch bulb is submerged in the HOT engine coolant. 
Non-adjustable radiator fan sensor 
ON @ 200° F
OFF @ 185° F
Uses ground wire to switch current to fan 
                                                    

						                        

							                        

                                                        
With 2 rows of 1" cores, AFCO Performance Series Radiators are   perfect for the street, the strip, or anything in between. These   crossflow radiators can be easily adapted to many applications. They are   100% TIG welded, 100% pressure tested and use no epoxy or sealers.  
'65-'87 Grand Prix 
'65-'86 Catalina/Bonnevillle 
'67-'69 Firebird 
'68-'72 GTO/LeMans 
'70-'81 Firebird/Trans Am 
'73-'80 Grand Am 
'65-'79 Delta 88/98 
'66-'87 Cutlass/442 
'72-'77 Omega/Omega SX 
'59-'74 Impala, Biscayne, Caprice, Bel Air
'70-'81 Camaro
'68-'87 Chevelle/El Camino, Malibu, Monte Carlo
'68-'79 Nova
NOT a direct fit - measure your application. May require some modifications and/or fabricating for proper fit. 
Fan/Shroud Assembly sold separately. 
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
With 2 rows of 1" cores, AFCO Performance Series Radiators are   perfect for the street, the strip, or anything in between. These   crossflow radiators can be easily adapted to many applications. They are   100% TIG welded, 100% pressure tested and use no epoxy or sealers.  
'65-'87 Grand Prix 
'65-'86 Catalina/Bonnevillle 
'67-'69 Firebird 
'68-'72 GTO/LeMans 
'70-'81 Firebird/Trans Am 
'73-'80 Grand Am 
'65-'79 Delta 88/98 
'66-'87 Cutlass/442 
'72-'77 Omega/Omega SX 
'59-'74 Impala, Biscayne, Caprice, Bel Air
'70-'81 Camaro
'68-'87 Chevelle/El Camino, Malibu, Monte Carlo
'68-'79 Nova
Aluminum Radiator Installation Instructions (PDF) 
NOT a direct fit - measure your application. May require some modifications and/or fabricating for proper fit. 
Fan/Shroud Assembly sold separately. 
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
With 2 rows of 1" cores, AFCO Performance Series Radiators are   perfect for the street, the strip, or anything in between. These   crossflow radiators can be easily adapted to many applications. They are   100% TIG welded, 100% pressure tested and use no epoxy or sealers.  
'65-'87 Grand Prix 
'65-'86 Catalina/Bonnevillle 
'67-'69 Firebird 
'68-'72 GTO/LeMans 
'70-'81 Firebird/Trans Am 
'73-'80 Grand Am 
'65-'79 Delta 88/98 
'66-'87 Cutlass/442 
'72-'77 Omega/Omega SX 
'71-'74 Impala, Biscayne, Caprice, Bel Air
'70-'81 Camaro
'68-'87 Chevelle/El Camino, Malibu, Monte Carlo
'68-'79 Nova
AFCO Radiator Installation Instructions (PDF) 
NOT a direct fit - measure your application. May require some modifications and/or fabricating for proper fit. 
Fan/Shroud Assembly sold separately. 
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
These AFCO Universal Fit Aluminum Crossflow Radiators use all the same technology that their Direct fit radiators do, but they do not have application specific mounting flanges and tabs. So if you are building something a little different or just want to save some cash these will fit the bill. We also have electric fan/shroud combos for these radiators listed. 
All measurements include the end tanks. Overall width includes mountings flanges if used. 
1-1/2" upper hose neck on the drivers side
1-3/4" lower hose neck on the passenger side
1/4" NPT brass drain cocks
Welded-on 2" wide side mount flanges on most models
Do not have built-in transmission coolers
10680103NP: 1960-1968 Chevy Fullsize with 22 3/8" Core - Crossflow
100% Aluminum construction (no epoxy)
Furnace Brazed Core - 2 rows of 1" tubes
TIG welded by skilled craftsmen in the USA
Billet filler neck offers strength and higher quality appearance over  stamped
Built-in fin covers (top & bottom) provide a great finish & aid  installation 
Drain Cock included
Inlets and outlets are positioned correctly for ease of flow
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.