AFCO 80103NPZ Performance GM Alum. Radiator-26.75 x 18.5 Inch-Polished

							                        

                                                        
Mount your radiator correctly! Kit includes two 3/8"-24 x 2-1/4" mounting bolts, lock nuts, washers, springs, and a pair of rubber cushions approximately 1/8" thick.
This radiator mounting kit is an OEM way of mounting the radiators on  the early vehicles.  The early vehicles had frames that were not of the  same quality as today’s modern frames and also the roads were less than  desirable and created a lot of body and frame flex and twist.  This  style kit eliminated damage to the radiator from the frame flex to a  rigid mounted radiator.  In today’s hot rod applications or OEM  installations there are a couple of mounting options.  The rubber pad  goes between the frame and the radiator mounting flange.  The spring can  sit above the radiator mount tab or down below the lip of the frame.   The bolt and applicable washer go through the mounting hole and spring  and is retained by the included lock nut.  Nut is tightened enough to  put tension on the spring in the desired amount and thus letting the  radiator absorb frame flex or twist by compression of the spring.   
                                                    

						                        

							                        

                                                        
Mounting radiators can be a real pain, but these universal radiator mounting brackets will makes it a little easier. Brackets are designed to mount our universal aluminum crossflow radiators with a 3" thick core to a variety of applications. Don't forget to order the rubber insulator pads (sold separately).

917-34700-STL 
This kit contains 4 steel brackets. The lower brackets measure 3-1/4" inside to inside. The upper brackets measure 2-1/2" inside to inside.

917-34700-ALU 
This kit contains 4 aluminum brackets. 2 lower mounts brackets and 2 upper mount brackets (for weight savings). The lower brackets measure 3-1/4" inside to inside. The upper bracket measure 2-1/2" inside to inside.
917-34700-SS
This kit contains 4 stainless steel pieces. 2 lower  mounts brackets and 2 upper mount brackets. The lower brackets measure  3-1/4" inside to inside. The upper bracket measure 2-1/2" inside to  inside. 
 
                                                    

						                        

							                        

                                                        
A must have when racing! High pressure cap for radiators raises boiling point of water.
Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles. 
                                                    

						                        

							                        

                                                        
These AFCO Universal Fit Aluminum Crossflow Radiators use all the same technology that their Direct fit radiators do, but they do not have application specific mounting flanges and tabs. So if you are building something a little different or just want to save some cash these will fit the bill. We also have electric fan/shroud combos for these radiators listed. 
All measurements include the end tanks. Overall width includes mountings flanges if used. 
1-1/2" upper hose neck on the drivers side
1-3/4" lower hose neck on the passenger side
1/4" NPT brass drain cocks
Welded-on 2" wide side mount flanges on most models
Built-in fin covers on top and bottom of radiator
Do not have built-in transmission coolers
10680103NP: 1960-1968 Chevy Fullsize with 22 3/8" Core - Crossflow
Instructions (PDF) 
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
With 2 rows of 1" cores, AFCO Performance Series Radiators are   perfect for the street, the strip, or anything in between. These   crossflow radiators can be easily adapted to many applications. They are   100% TIG welded, 100% pressure tested and use no epoxy or sealers.  
'65-'87 Grand Prix 
'65-'86 Catalina/Bonnevillle 
'67-'69 Firebird 
'68-'72 GTO/LeMans 
'70-'81 Firebird/Trans Am 
'73-'80 Grand Am 
'65-'79 Delta 88/98 
'66-'87 Cutlass/442 
'72-'77 Omega/Omega SX 
'59-'74 Impala, Biscayne, Caprice, Bel Air
'70-'81 Camaro
'68-'87 Chevelle/El Camino, Malibu, Monte Carlo
'68-'79 Nova
NOT a direct fit - measure your application. May require some modifications and/or fabricating for proper fit. 
Fan/Shroud Assembly sold separately. 
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
With 2 rows of 1" cores, AFCO Performance Series Radiators are   perfect for the street, the strip, or anything in between. These   crossflow radiators can be easily adapted to many applications. They are   100% TIG welded, 100% pressure tested and use no epoxy or sealers.  
'65-'87 Grand Prix 
'65-'86 Catalina/Bonnevillle 
'67-'69 Firebird 
'68-'72 GTO/LeMans 
'70-'81 Firebird/Trans Am 
'73-'80 Grand Am 
'65-'79 Delta 88/98 
'66-'87 Cutlass/442 
'72-'77 Omega/Omega SX 
'59-'74 Impala, Biscayne, Caprice, Bel Air
'70-'81 Camaro
'68-'87 Chevelle/El Camino, Malibu, Monte Carlo
'68-'79 Nova
Aluminum Radiator Installation Instructions (PDF) 
NOT a direct fit - measure your application. May require some modifications and/or fabricating for proper fit. 
Fan/Shroud Assembly sold separately. 
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
With 2 rows of 1" cores, AFCO Performance Series Radiators are perfect for  the street, the strip, or anything in between. These crossflow radiators feature  2" mounting flanges which can be easily adapted to many applications. They are  100% TIG welded, 100% pressure tested and use no epoxy or sealers.  
'65-'87 Grand Prix 
'65-'86 Catalina/Bonnevillle 
'67-'69 Firebird 
'68-'72 GTO/LeMans 
'70-'81 Firebird/Trans Am 
'73-'80 Grand Am 
'65-'79 Delta 88/98 
'66-'87 Cutlass/442 
'72-'77 Omega/Omega SX 
'59-'74 Impala, Biscayne, Caprice, Bel Air
'70-'81 Camaro
'68-'87 Chevelle/El Camino, Malibu, Monte Carlo
'68-'79 Nova
AFCO Radiator Installation Instructions (PDF) 
NOT a direct fit - measure your application.  May require some modifications and/or  fabricating for proper fit. 
 
Fan/Shroud Assembly sold separately. 
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
These AFCO Universal Fit Aluminum Crossflow Radiators use all the same technology that their Direct fit radiators do, but they do not have application specific mounting flanges and tabs. So if you are building something a little different or just want to save some cash these will fit the bill. We also have electric fan/shroud combos for these radiators listed. 
All measurements include the end tanks. Overall width includes mountings flanges if used. 
1-1/2" upper hose neck on the drivers side
1-3/4" lower hose neck on the passenger side
1/4" NPT brass drain cocks
Welded-on 2" wide side mount flanges on most models
Do not have built-in transmission coolers
10680103NP: 1960-1968 Chevy Fullsize with 22 3/8" Core - Crossflow
100% Aluminum construction (no epoxy)
Furnace Brazed Core - 2 rows of 1" tubes
TIG welded by skilled craftsmen in the USA
Billet filler neck offers strength and higher quality appearance over  stamped
Built-in fin covers (top & bottom) provide a great finish & aid  installation 
Drain Cock included
Inlets and outlets are positioned correctly for ease of flow
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.