AFCO 2012-2053 Master Cylinder Push Rod
Click image to enlarge
Q & A (0)
What's in the Box
Master cylinder replacement/repair parts for AFCO single piston aluminum master cylinders.
Racer Note: Master cylinder bores are built with close tolerances. Stroking the master cylinder dry can cause damage to the internal rubber seals causing leaks, soft pedal, and lack of pressure. Never clean a master cylinder with carburetor cleaner or similar products as they will cause seal damage.
Racer Note: When rebuilding brake master cylinders and calipers, always lubricate internal parts with brake assembly fluid before installation.
This will keep seals and o-rings from becoming damaged by dry cylinder walls and pistons.
You may also be interested in:
Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male AdapterView$2.99
AFCO Dual Master Cylinder Floor Mount Brake Pedal AssemblyView$189.99
Quick ViewQuick View Detailsx
This combo pairs a Wilwood floor mount pedal assembly with two AFCO master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.
US Brake Master Cylinders
- External return spring maintains positive pedal feel, prolongs pad life
- Polished smooth bores
- One-piece alumiunum construction
Has a 6:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", 1".
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.Compare