Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
We're sorry, this item is not available.
We're sorry, this item is not available.
AFCO 1963-66 Mustang/Falcon Aluminum Radiators
Click image to enlarge Click image to enlarge
No video at this time.
 

AFCO's Direct Fit Aluminum radiators will bolt directly into your Ford Mustang, Falcon, or Mercury Comet with no hassles. AFCO ensures that the bolt holes will line up, cooling lines are in the proper locations, and OEM fan shrouds and accessories bolt up with ease. Plus, with two rows of 1" cores perfectly matched to the application, this unit has the capacity to cool HiPo Small Blocks (even with a power adder!).

For 1965-1966 Mustang w/ V-8 engine and 1963-1965 Falcon/Comet w/ V-8 engine. Choose Passenger (RH) or Driver (LH) side lower outlet.

  • 100% Aluminum construction (no epoxy)
  • Furnace Brazed Core - 2 rows of 1" tubes
  • Tanks are made of .080” 3003 aluminum for strength and durability
  • TIG welded by skilled craftsmen in the USA
  • Factory fan shroud provisions
  • Inlets and outlets are factory-style and in stock locations
  • Factory pressure-tested
  • Billet filler necks feature screw-in bleed – won't crack or leak with age
  • Core Thickness:  2-1/4"
  • Inlet Diameter:  1.5" O.D.
  • Outlet Diameter: 1.75" O.D.
  • Brass Drain Cock Fitting:  1/4" NPT (included)
  • Transmission Cooler Ports:  1/4" NPT
  • Filler Neck Hose Barb:  1/8" Straight (included)
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
You May Also Be Interested In...
  • (12 Ratings)
    Price: $44.99
    More Info
    Stainless Steel Expansion Tank, 3 Inch x 10 Inch
    x
    							                        

    If you run a high compression or blower motor in your hot rod, you will need this tank. The big 3" diameter oversize tank gives you the added capacity needed. Attractive, stainless steel construction. Mounting hardware included.

    • Useful anywhere a larger capacity tank is needed
    • Use as an overflow tank from the radiator
    • Cannot be pressurized

    Learn more about cooling with recovery systems and how they work by reading our tech article. Cooling System Principles.  

  • (4 Ratings)
    Price: $14.99
    More Info
    Spal Fan Mounting Kit
    x
    							                        

    A mounting kit for Spal curved bladed fans.

  • (3 Ratings)
    Price: $5.99
    More Info
    Gates 32954 Power Grip Hose Clamp, 2 Inch - 2 1/4 Inch OD
    x
    							                        

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • (4 Ratings)
    Price: $5.99
    More Info
    Gates 32948 Power Grip Hose Clamp, 1 3/4 Inch - 2 Inch OD
    x
    							                        

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • (3 Ratings)
    Price: $33.99
    More Info
    AFCO 80152-16 Billet Aluminum Radiator Cap
    x
    							                        

    This 16 lb. radiator cap is made of billet aluminum and fully polished.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.  

  • Price: $118.99
    More Info
    AFCO 80176 Electric Cooling Fan, 8 Inch S-Blade
    x
    							                        

    These fans offer the best CFM vs. AMP draw of any electric units we have tested. All fans are made from glass-filled nylon and are rated at zero static. Each fan is also reversible, so it can be used as a puller or pusher.

    To reverse the fan, the fan blade can be flipped or the wires can be reversed.

    Fan Features:

    • Low amp draw
    • Mount in front or rear of radiator
    • Thin design
    • Reversible - push/pull

    Catalog Correction: These fans DO NOT include an on/off switch.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Price: $575.99 - $1,199.99
    More Info
    AFCO Direct Fit 1963-66 Falcon/Comet/Mustang Radiators, Pass. Side Outlet
    x
    							                        

    AFCO's Direct Fit Aluminum radiators will bolt directly into your Ford Falcon, Mercury Comet, or Ford Mustang with no hassles. AFCO ensures that the bolt holes will line up, cooling lines are in the proper locations, and OEM fan shrouds and accessories bolt up with ease. Plus, with two rows of 1" cores perfectly matched to the application, this unit has the capacity to cool HiPo Small Blocks (even with a power adder!).

    For 1963-1966 Falcon/Comet/Mustang w/ V-8 engine.

    • Core Thickness:  2-1/4"
    • Inlet Diameter:  1.5" O.D.
    • Outlet Diameter: 1.75" O.D.
    • Brass Drain Cock Fitting:  1/4" NPT (included)
    • Transmission Cooler Ports:  1/4" NPT
    • Filler Neck Hose Barb:  1/8" Straight (included)
    • 100% Aluminum construction (no epoxy)
    • Furnace Brazed Core - 2 rows of 1" tubes
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory fan shroud provisions
    • Inlets and outlets are factory-style and in stock locations
    • Factory pressure-tested
    • Billet filler necks feature screw-in bleed – won't crack or leak with age

    Instructions (PDF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.