AFCO 1330SR5T Coilover Shocks w/o Spring 12 Inch Ext, 5/8 Inch Bearing

							                        

                                                        
Speedway sells the ONLY fully engineered shock mount. The 5/8" forged button head bolt looks good while offering maximum support.  The 1-3/4" x 1-3/4" billet aluminum support spacer has internal threads. This allows you to properly support this shock without crushing the bushing like others do, which leads to shock failures. There's a reason major chassis builders use this mount.
Billet aluminum. Includes required washers and nylon lock nut. Mounts sold individually.
916-36010 Instructions (PDF)
                                                    

						                        

							                        

                                                        
Weld to 3" rear end
Adjustable 3" - 5" below axle centerline
Has three 1/2" holes for shocks
Simply drill hole size to 5/8" when using 5/8" coil-over mounting hardware
                                                    

						                        

							                        

                                                        Adjustable design works great for raising or lowering ride height on all sizes of coilovers. 
                                                    
						                        

							                        

                                                        
AFCO's R-Series Non-Adjustable Billet Aluminum coilovers are second  to none. The secret is in the precision, race-inspired internal design  that provides exceptional sensitivity to small, quick movements (bumps),  while still providing firm control over relatively slower strokes  (chassis roll). This “velocity-sensitive” valving sets AFCO shocks apart  on the track and has been tuned to provide the ride you’re after on  your street rod.
Internal valve design provides sensitivity, response, control, performance, and a smooth ride
Aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Springs NOT included. Three shock end types avaliable:
 5/8" I.D. Teflon lined bearing
1/2" I.D. Teflon lined bearing
5/8" I.D. polyurethane bushing 
                                                    

						                        

							                        

                                                        
AFCO's R-Series Non-Adjustable Billet Aluminum coilovers are second  to none. The secret is in the precision, race-inspired internal design  that provides exceptional sensitivity to small, quick movements (bumps),  while still providing firm control over relatively slower strokes  (chassis roll). This “velocity-sensitive” valving sets AFCO shocks apart  on the track and has been tuned to provide the ride you’re after on  your street rod.
Internal valve design provides sensitivity, response, control, performance, and a smooth ride
Aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Springs NOT included. Three shock end types avaliable:
 5/8" I.D. Teflon lined bearing
1/2" I.D. Teflon lined bearing
5/8" I.D. polyurethane bushing 
                                                    

						                        

							                        

                                                        
AFCO's R-Series Non-Adjustable Billet Aluminum coilovers are second  to none. The secret is in the precision, race-inspired internal design  that provides exceptional sensitivity to small, quick movements (bumps),  while still providing firm control over relatively slower strokes  (chassis roll). This “velocity-sensitive” valving sets AFCO shocks apart  on the track and has been tuned to provide the ride you’re after on  your street rod.
Internal valve design provides sensitivity, response, control, performance, and a smooth ride
Aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Springs NOT included. Three shock end types avaliable:
 5/8" I.D. Teflon lined bearing
1/2" I.D. Teflon lined bearing
5/8" I.D. polyurethane bushing 
                                                    

						                        

							                        

                                                        
AFCO's R-Series Non-Adjustable Billet Aluminum coilovers are second  to none. The secret is in the precision, race-inspired internal design  that provides exceptional sensitivity to small, quick movements (bumps),  while still providing firm control over relatively slower strokes  (chassis roll). This “velocity-sensitive” valving sets AFCO shocks apart  on the track and has been tuned to provide the ride you’re after on  your street rod.
Internal valve design provides sensitivity, response, control, performance, and a smooth ride
Aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Springs NOT included. Three shock end types avaliable:
 5/8" I.D. Teflon lined bearing
1/2" I.D. Teflon lined bearing
5/8" I.D. polyurethane bushing 
                                                    

						                        

							                        

                                                        
This kit installs at the bottom of the 2-1/2" I.D. coil-over spring and allows easier adjustment of your ride height. Includes two bearings and four washers.
Coil-Over Mounting Guide 
Coil-Over Illustration
 
                                                    

						                        

							                        

                                                        
No other street rod shock on the market can trump the quality or features of AFCO's R-Series Double-Adjustable Billet Aluminum Coilovers. You can now adjust both compression and rebound with a twist of your wrist. Double adjustments give the tuner the ability to fine tune every aspect of chassis movement to provide the ultimate in launch control, smooth ride, cornering ability, or a combination of all three for the best overall performance. 
Design combines sensitivity, response, control, performance, and a smooth ride
Countless tuning options for complete control
Machined aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Has 1/2" I.D. x 1" wide Teflon lined rod ends (installed). Springs NOT included.
Front Coil-Over Mounting Guide (GIF)
 
Rear Coil-Over Mounting Guide (GIF) 
                                                    

						                        

							                        

                                                        
AFCO's R-Series Non-Adjustable Billet Aluminum coilovers are second  to none. The secret is in the precision, race-inspired internal design  that provides exceptional sensitivity to small, quick movements (bumps),  while still providing firm control over relatively slower strokes  (chassis roll). This “velocity-sensitive” valving sets AFCO shocks apart  on the track and has been tuned to provide the ride you’re after on  your street rod.
Internal valve design provides sensitivity, response, control, performance, and a smooth ride
Aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Springs NOT included. Three shock end types avaliable:
 5/8" I.D. Teflon lined bearing
1/2" I.D. Teflon lined bearing
5/8" I.D. polyurethane bushing 
                                                    

						                        

							                        

                                                        
AFCO's R-Series Non-Adjustable Billet Aluminum coilovers are second  to none. The secret is in the precision, race-inspired internal design  that provides exceptional sensitivity to small, quick movements (bumps),  while still providing firm control over relatively slower strokes  (chassis roll). This “velocity-sensitive” valving sets AFCO shocks apart  on the track and has been tuned to provide the ride you’re after on  your street rod.
Internal valve design provides sensitivity, response, control, performance, and a smooth ride
Aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Springs NOT included. Three shock end types avaliable:
 5/8" I.D. Teflon lined bearing
1/2" I.D. Teflon lined bearing
5/8" I.D. polyurethane bushing 
                                                    

						                        

							                        

                                                        
AFCO's R-Series Non-Adjustable Billet Aluminum coilovers are second  to none. The secret is in the precision, race-inspired internal design  that provides exceptional sensitivity to small, quick movements (bumps),  while still providing firm control over relatively slower strokes  (chassis roll). This “velocity-sensitive” valving sets AFCO shocks apart  on the track and has been tuned to provide the ride you’re after on  your street rod.
Internal valve design provides sensitivity, response, control, performance, and a smooth ride
Aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Springs NOT included. Three shock end types avaliable:
 5/8" I.D. Teflon lined bearing
1/2" I.D. Teflon lined bearing
5/8" I.D. polyurethane bushing 
                                                    

						                        

							                        

                                                        
AFCO's R-Series Non-Adjustable Billet Aluminum coilovers are second  to none. The secret is in the precision, race-inspired internal design  that provides exceptional sensitivity to small, quick movements (bumps),  while still providing firm control over relatively slower strokes  (chassis roll). This “velocity-sensitive” valving sets AFCO shocks apart  on the track and has been tuned to provide the ride you’re after on  your street rod.
Internal valve design provides sensitivity, response, control, performance, and a smooth ride
Aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Springs NOT included. Three shock end types avaliable:
 5/8" I.D. Teflon lined bearing
1/2" I.D. Teflon lined bearing
5/8" I.D. polyurethane bushing 
                                                    

						                        

							                        

                                                        
AFCO's R-Series Non-Adjustable Billet Aluminum coilovers are second  to none. The secret is in the precision, race-inspired internal design  that provides exceptional sensitivity to small, quick movements (bumps),  while still providing firm control over relatively slower strokes  (chassis roll). This “velocity-sensitive” valving sets AFCO shocks apart  on the track and has been tuned to provide the ride you’re after on  your street rod.
Internal valve design provides sensitivity, response, control, performance, and a smooth ride
Aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Springs NOT included. Three shock end types avaliable:
 5/8" I.D. Teflon lined bearing
1/2" I.D. Teflon lined bearing
5/8" I.D. polyurethane bushing 
                                                    

						                        

							                        

                                                        
AFCO's R-Series Non-Adjustable Billet Aluminum coilovers are second  to none. The secret is in the precision, race-inspired internal design  that provides exceptional sensitivity to small, quick movements (bumps),  while still providing firm control over relatively slower strokes  (chassis roll). This “velocity-sensitive” valving sets AFCO shocks apart  on the track and has been tuned to provide the ride you’re after on  your street rod.
Internal valve design provides sensitivity, response, control, performance, and a smooth ride
Aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Springs NOT included. Three shock end types avaliable:
 5/8" I.D. Teflon lined bearing
1/2" I.D. Teflon lined bearing
5/8" I.D. polyurethane bushing 
                                                    

						                        

							                        

                                                        
AFCO's R-Series Non-Adjustable Billet Aluminum coilovers are second  to none. The secret is in the precision, race-inspired internal design  that provides exceptional sensitivity to small, quick movements (bumps),  while still providing firm control over relatively slower strokes  (chassis roll). This “velocity-sensitive” valving sets AFCO shocks apart  on the track and has been tuned to provide the ride you’re after on  your street rod.
Internal valve design provides sensitivity, response, control, performance, and a smooth ride
Aluminum body for long lasting good looks & lightweight performance
Built-in coil-over mount & threaded body for easy ride height adjustment
Every shock dyno-tested to ensure the highest quality standards
Made in the USA 
Springs NOT included. Three shock end types avaliable:
 5/8" I.D. Teflon lined bearing
1/2" I.D. Teflon lined bearing
5/8" I.D. polyurethane bushing