Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

AFCO 10149 1 Inch Hex Steel Lug Nut, 7/16 Inch RH Fine Thread

AFCO 10149 1 Inch Hex Steel Lug Nut, 7/16 Inch RH Fine Thread
AFCO 10149 1 Inch Hex Steel Lug Nut, 7/16 Inch RH Fine Thread

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Use these oversized AFCO 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts. 

You will need a 1" hex (6-sided) socket. 

7/16" Fine Thread fits most GM mid-sized cars.

  • 45° taper
  • 7/16" RH Fine Thread, Single Taper

What's The Angle
Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

 

You may also be interested in:

Single Sided Steel Lug Nut, 7/16 Inch RH Fine Thread, Single Taper
SKU-91003911
                        

Use these oversized 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts.

You will need a 1" hex (6-sided) socket. 

7/16" Fine Thread fits most GM mid-size cars.

  • 45° taper
  • 7/16" RH Fine Thread, Single Taper

What's The Angle
Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

 

Double Sided Steel Lug Nut, 7/16 Inch RH Fine Thread, Double Taper
SKU-91003924
                        

Use these oversized 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts.  Double-sided 45° seat design for quick and secure fastening.

You will need a 1" hex (6-sided) socket. 

7/16" Fine Thread fits most GM mid-size cars.

  • 45° taper
  • 7/16" RH Fine Thread, Double Taper

What's The Angle
Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

 

Currie 95304 7/16 x 1-11/16 Inch Wheel Stud
SKU-91095304
                        

This wheel stud manufactured by Currie Enterprises is made from a high strength steel. Its press-in design makes it stronger than stock.

  • Press-In Design
  • .610 Knurl
  • Stonger than stock
  • Sold each