Call: 800.979.0122
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
x
Help Center

sales@speedwaymotors.com

Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

AC Delco PF2 Duraguard Engine Oil Filter, Ford/Mopar

AC Delco PF2 Duraguard Engine Oil Filter, Ford/Mopar

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Protect your Ford or Mopar engine with this premium quality oil filter. Outstanding filter capacity, enhanced efficiency, consistent flow management and high-durability design help provide exceptional filtering performance.

  • 98% single-pass efficiency at 25-30 microns
  • Patented cellulose media traps particles 1/3 the width of a human hair
  • Designed with 5x greater burst strength than most engine oil operating pressures

Specs

  • Thread Size:  3/4"-16
  • Diameter:  3.9"
  • Length:  5"

Customer Reviews

This product has no reviews.

Product Q&A

1 questions : 1 answers

1 answers

Is it true that Ford uses a relief valve in the oil filter itself to bypass the filter in the event it becomes clogged, unlike the Chevrolet which uses a bolt on bypass in the block? I have been told to never use a filter designed for a Chevrolet on a For

Gourd for Ford
Burlington, VT
June 09, 2011

Is it true that Ford uses a relief valve in the oil filter itself to bypass the filter in the event it becomes clogged, unlike the Chevrolet which uses a bolt on bypass in the block? I have been told to never use a filter designed for a Chevrolet on a For

Answers

June 13, 2011
John
AC, K&N, Penzoil, Fram, Duroguard, Wix, and most oil filter manufacturers build the filters specific to the engine they are used on. A suggestion would be to contact the manufacturer of the filter of your choice to clarify construction and eliminate any concerns. From past experience we know that there is some oil pressure variances from one manufacturer to another but nothing extreme enough to cause problems.
Page 1 of 1

You may also be interested in:

Fram HP1 High Performance Racing Oil Filter, Ford
(Part #373HP1)
                        

Fram Racing oil filters have a heavy-duty steel body construction to resist high pressure surges and external impact. Rated at 10 GPM with a maximum 200 psi operating pressure. The HP1 has a pressure relief valve and a 25 micron rating.

  • Low-restriction racing media designed for high oil flow
  • Spiral-shaped center tube to provide protection against collapse
  • Heavy gauge steel tapping plate to withstand high pressure flexing
  • Screen-over bypass valve to provide additional protection against larger contaminants
  • Relief valve developed uniquely for high oil flow racing conditions
Ford-Mopar 3/4-16 Chrome Oil Filter
(Part #54522400)
                        

Quality, pressure tested filter for Ford or Mopar engines with 3/4"-16 threads. Beautifully chrome plated. Measures 5-3/8" long.

Ford Racing M-6880-A50 90 Degree Oil Filter Adapter
(Part #9106880)
                        

There are times you just don't have room for the oil filter on your Ford powered toy. This adapter attaches where the oil filter mounts and turns the filter 90 degrees. Rotate filter toward front of engine to provide clearance for engine swaps and chassis modifications.

Fits most Ford V8 and some 4 cyl. engines that use Fram PH8A/HP1 or Motorcraft FL-1A oil filters. 

OTR Racing Short Oil Filter, Ford
(Part #91015173)
                        OTR Filters very own oil filters are the finest  spin on oil filters made in the motorsports world. Race engines are  expensive, protect your investment.

Our oil filters have:
  • An internal magnet designed to attract fine steel particles too small to be trapped by the filter media!
  • Non stick gaskets made from a proprietary synthetic rubber compound.
  • Burst strength of 600 P.S.I.! Our spin on racing oil filters exceeds the ARP 1400 Standard by 5090, and they are made to handle the harshest conditions.
  • Ability to trap particles down to 30 micron or less!
  • Heaviest case and base plate in motorsports!
  • Met TCM bypass specification of 12-14 P.S.I., which reduces the risk of premature bypass that can result in  unfiltered oil flowing to your engine.
Note:  1" nut welded on the bottom of the filter with 4 safety wire tabs allowing for secure attachment every 90 degrees. Nut is welded on so securely that the canister will distort before weld breaks. Base must break/tear before the nut will come off.
OTR Racing Tall Oil Filter, Ford
(Part #91015174)
                        OTR Filters very own oil filters are the finest  spin on oil filters made in the motorsports world. Race engines are  expensive, protect your investment.

Our oil filters have:
  • An internal magnet designed to attract fine steel particles too small to be trapped by the filter media!
  • Non stick gaskets made from a proprietary synthetic rubber compound.
  • Burst strength of 600 P.S.I.! Our spin on racing oil filters exceeds the ARP 1400 Standard by 5090, and they are made to handle the harshest conditions.
  • Ability to trap particles down to 30 micron or less!
  • Heaviest case and base plate in motorsports!
  • Met TCM bypass specification of 12-14 P.S.I., which reduces the risk of premature bypass that can result in  unfiltered oil flowing to your engine.
  • 6-3/16" Height x 3-3/4" width with 3/4"-16 thread
Note: 1" nut welded on the bottom of the filter with 4 safety wire tabs allowing for secure attachment every 90 degrees. Nut is welded on so securely that the canister will distort before weld breaks. Base must break/tear before the nut will come off.