Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -6 AN

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Material Type:
Aluminum
Color:
Red/Blue
Sold in Quantity:
Each
Finish:
Anodized
Angle:
90 degree
Garage Sale:
No
AN Size:
-6 AN
Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -6 AN
Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -6 AN

Click image to enlarge

Watch the video below to see exactly how the KOUL tool can make assembling hoses and fittings a snap.

Speeday Motors Logo
X
Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -6 AN

Details

Reviews

Q & A

What's in the Box

This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

  • -6 AN
  • 90 degree angle
  • Lightweight aluminum hose ends are completely reusable, and interchangeable
  • 37° angled sealing surface guarantees a positive anti-leak seal
  • Available in a Red/Blue corrosion resistant finish

Full Swivel Application Chart (GIF)

You may also be interested in:

Koul Tools 468 Braided Hose Installation Tool, -4 AN, -6 AN, -8 AN
                        

Putting hose ends on braided stainless steel hoses can be one of the most frustrating jobs there is...until now!  This handy little tool from Koultools allows you to easily install the hose into the fitting socket without the loss of blood. This KoulTool AN fitting tool is virtually indestructible and can pay for itself the first time you use it.

Set # 617-9510 with AN 4, AN 6 and AN 8. 

Instructions (PDF)

Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -8 AN
                        

This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

  • -8 AN
  • 90 degree angle
  • Lightweight aluminum hose ends are completely reusable, and interchangeable
  • 37° angled sealing surface guarantees a positive anti-leak seal
  • Available in a Red/Blue corrosion resistant finish

Full Swivel Application Chart (GIF)

Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Red/Blue, -10 AN
                        

This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

  • -10 AN
  • 90 degree angle
  • Lightweight aluminum hose ends are completely reusable, and interchangeable
  • 37° angled sealing surface guarantees a positive anti-leak seal
  • Available in a Red/Blue corrosion resistant finish

Full Swivel Application Chart (GIF)

Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Red/Blue, -12 AN
                        

This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

  • -12 AN female to push-on adapter
  • 90 degree angle fuel line hose connector
  • Lightweight aluminum hose ends are completely reusable, and interchangeable
  • 37° angled sealing surface guarantees a positive anti-leak seal
  • Available in a Red/Blue corrosion resistant finish

Full Swivel Application Chart (GIF)

Fragola 109004 Hose End Coupler Fitting, 90 Degree, Blue/Red, -4 AN
                        

This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a blue/red anodized finish. For use with Fragola Premium Black Synthetic -4 AN Hose (part number 620504).

  • -4 AN
  • Lightweight aluminum hose ends are completely reusable, and interchangeable
  • Unique taper design ensures easy assembly
  • 37° angled sealing surface guarantees a positive anti-leak seal
  • Accepts a variety of lightweight aluminum AN style adapters & fittings
  • Available in Blue/Red corrosion resistant finish

90° Full Flow Ends come in sizes of AN4, AN6, AN8, AN10, AN12 and AN16.

Fitting Thread Application Chart (GIF)

Aeroquip FBM4032 Full Flow Hose End Coupler Fitting, 90 Degree, -6 AN
                        

This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a blue/red anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

  • -6 AN 
  • Lightweight aluminum hose ends are completely reusable, and interchangeable
  • Unique taper design ensures easy assembly
  • 37° angled sealing surface guarantees a positive anti-leak seal
  • Accepts a variety of lightweight aluminum AN style adapters & fittings
  • Available in Blue/Red corrosion resistant finish

90° Full Flow Ends come in sizes of AN4, AN6, AN8, AN10, AN12 and AN16.

Fitting Thread Application Chart (GIF)

Aeroquip FCE4032 Nickel 90 Degree Hose End Coupler Fitting, -6 AN
                        

Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

  • -6 AN Aluminum
  • Lightweight aluminum hose ends are completely reusable, and interchangeable
  • 37° angled sealing surface guarantees a positive anti-leak seal
  • Available in a Nickel corrosion resistant finish

Fitting Thread Application Chart (GIF)

3ft Stainless Steel Braided Line, Low Pressure Fuel/Water/Air/Oil, AN6
                        

This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Works great as a fuel line for gasoline or alcohol fuels. 

Note: This hose is >>NOT<< compatible with ETHANOL blended GAS including E85 ! ! !

Not to be used for brake or power steering applications. Maximum operating pressure is 750 psi.

Fitting Thread Application Chart (GIF)