9 Inch Ford Alternator Drive System
Click image to enlarge
Q & A (4)
What's in the Box
Face it, that alternator is ugly and in the way. To clean up your engine compartment you could mount this small alternator on your 9" Ford rearend. The bracket bolts to the pinion support and the yoke has a pulley to drive the one wire 50 amp alternator. But you have to remember that if you are not moving, this set-up is not charging. You will have to take it out at highway speeds to charge the system up. Features short/narrow style yoke that accepts 1310 series u-joints (1-1/16" cap x 3-7/32").
- Short narrow yoke
- Accepts 1310 Series U-joint (1-1/16" cap x 3-7/32")
- 1310 to 1330 and 1350 u-joints noted below
Alternator is 50 AMP.
Alternator pulley diameter is 2-3/4".
Pinion pulley diameter is 4-1/2".
Centerline of pinion to centerline of alternator is 8-3/4".
Centerline of alternator to outside edge of bracket is 11-3/4".
Overall length of alternator is 5-5/8".
Alternator mounts to the left of the pinion and faces forward.
Back of alternator to housing is 1".
You may also be interested in:
Universal Drive Shaft U-Bolts, 1-1/16 Inch CapView$4.99Compare