7 Inch Steel Tube

These 5/8" swedged steel sleeves have a 7/8" O.D. tube, 0.065 wall, and 5/8" RH and LH fine threads. Available in 1" increments from 4" to 20". IMCA approved. Sold Each.

AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings. Consistent wall thickness allows better thread engagement Yellow zinc-plated for increased part life Deep knurl for easy length adjustments

Now you can take control of your AFCO shock service and maintenance needs.

AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings. Consistent wall thickness allows better thread engagement Yellow zinc-plated for increased part life Deep knurl for easy length adjustments

AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings. Consistent wall thickness allows better thread engagement Yellow zinc-plated for increased part life Deep knurl for easy length adjustments

AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings. Consistent wall thickness allows better thread engagement Yellow zinc-plated for increased part life Deep knurl for easy length adjustments

AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings. Consistent wall thickness allows better thread engagement Yellow zinc-plated for increased part life Deep knurl for easy length adjustments

AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings. Consistent wall thickness allows better thread engagement Yellow zinc-plated for increased part life Deep knurl for easy length adjustments

AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings. Consistent wall thickness allows better thread engagement Yellow zinc-plated for increased part life Deep knurl for easy length adjustments

AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings. Consistent wall thickness allows better thread engagement Yellow zinc-plated for increased part life Deep knurl for easy length adjustments

AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings. Consistent wall thickness allows better thread engagement Yellow zinc-plated for increased part life Deep knurl for easy length adjustments

AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings. Consistent wall thickness allows better thread engagement Yellow zinc-plated for increased part life Deep knurl for easy length adjustments

AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings. Consistent wall thickness allows better thread engagement Yellow zinc-plated for increased part life Deep knurl for easy length adjustments

AFCO swaged steel tubes are formed using .065" wall DOM material. This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows. The finished product has reduced ends and the wall thickness stays within +/- .001". No stretching or crimping is used to produce an AFCO swaged tube. You can't buy a better-built tube for strength and weight savings.Consistent wall thickness allows better thread engagementYellow zinc-plated for increased part lifeDeep knurl for easy length adjustments

Lightweight steel. 12" tall with rolled bell for more air flow. These fuel injection stacks are sold individually, so you must purchase eight to get a complete set.