Rod End Supply AM 6-7 Heim Joint Rod Ends, 7/16-20 RH Male, 3/8 Hole
Click image to enlarge
Q & A
What's in the Box
You may also be interested in:
Standard Steel Heim Joint Rod Ends, 7/16-20 RH MaleMore InfoCompare
Aluminum Swedged Rod - 7/16 Inch ThreadMore InfoCompare
Precision Carbon Steel RH Male Heim Joint Rod Ends, 7/16 InchPrice: $8.99More InfoCompare
Speedway Steel 7/16 Inch RH Male Heim Joint Rod Ends with StudMore InfoCompare
Rod End Supply AML 6-7 Heim Joint Rod Ends, 7/16-20 LH Male, 3/8 HolePrice: $10.99More InfoCompare
Heavy Duty Aluminum Jam Nut, 7/16-20 RHMore InfoCompare
These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).
Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.
Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
Swedged aluminum steering panhard and radius rods that are 3/4" x .120 round 6061-T6 and tapped for 7/16"-20 thread rod ends. Stocked in several lengths.
Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.
Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined and has a hex built in for easy installation.
Item Details7/16" stud/thread
- 7075-T6 clear anodize aluminum
- 7/16" shank, 3/8" hole
- Self lubricating, self sealing
These heavy duty jam nuts are made of 7075 aluminum alloy and are clear anodized for corrosion resistance. Fine thread for use with rod ends, heim joints, and clevis.
Item Details11/16" hex